Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Akrapovic
Akrapovic for Porsche
Akrapovič exhaust systems let Porsche owners enjoy lightweight construction, advanced materials, and a distinctive performance sound developed through top-level motorsport.
A Quick Look at Akrapovic
Akrapovič information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Akrapovic is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose Akrapovič on Porsche models include refined performance sound, lower weight, and reduced corrosion risk compared with many standard systems.
- Common issues prompting exhaust replacement include corrosion, leaks, rattles from internal baffles or mounts, drone, blocked catalytic converters, and emissions test failures.
- Watch for symptoms such as blowing or ticking noises, exhaust smell, soot marks at joints, vibration from misaligned hangers, and rattles from inside silencers.
- Practical tip: replace clamps, gaskets, mounts, and any rusted fixings during installation to minimise leaks, rattles, and the need to redo labour.
- Practical tip: consider whether you want a valved or non-valved setup, and keep the rest of the system matched to help control drone and overall noise.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Exhausts — Exhausts in this category allow Porsche owners to replace corroded or leaking components, change sound, reduce weight, or improve flow where appropriate, with options to suit everything from daily-driven cars to tuned and track-focused setups.
Sport Silencers / Mufflers — Sport silencers and mufflers are chosen when you want a more engaging Porsche exhaust note and potentially reduced restriction, while still keeping everyday drivability and motorway comfort within acceptable limits.
All Silencers / Mufflers — This category covers different silencer layouts so you can compare standard, sport, and valved systems for your Porsche, whether you are solving corrosion and noise issues or tailoring the car’s sound to your preference.
Exhaust Fitting Kits — Exhaust fitting kits bundle the gaskets, clamps, studs, and related hardware needed to install or upgrade a Porsche exhaust system properly, helping to ensure good sealing, correct alignment, and fewer problems with seized or reused fixings.
Akrapovic Exhaust — Akrapovič exhaust systems for Porsche focus on lightweight construction, carefully tuned flow, and a distinctive engineered sound, making them a popular choice where owners want a high-end upgrade in materials, refinement, and overall exhaust character.
Explore Akrapovic at Design911
View the current Akrapovic range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2018>>
Constructed from high-quality stainless steel , this optional addition to the Slip-On Line will enhance the sound of the exhaust, and power will be taken to greater heights. Fitted with sporty catalytic converters, installing this option increases the engine's performance and adds an aural improvement for all to appreciate. Providing improved flow for the exhaust gases, the link pipes take the 911 to greater heights.
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
L-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017 - 2019
The diffuser is perfectly styled to add a stunning visual touch to the rear of the Porsche 911. Made from hand-crafted, high-grade carbon fibre, the rear diffuser is available in either a matte or high-gloss finish to complement the twin centrally located tailpipes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DI-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2018>>
The diffuser is perfectly styled to add a stunning visual touch to the rear of the Porsche 911 Turbo. Made from hand-crafted, high-grade carbon fibre, the rear diffuser is available in either a matte or high-gloss finish to complement the twin centrally located tailpipes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DI-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017>>
Complete the slip-on system with titanium tailpipes in combination with carbon fiber diffuser in matte or high gloss finish (sold separately, part no
High Gloss DI-PO/CA/4/G or Matte DI-PO/CA/4/M).
Fitment notice: The system is designed to replace the Porsche sport exhaust system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Carrera / S / 4 / 4S / GTS 2017>>
The diffuser is perfectly styled to add a stunning visual touch to the rear of the Porsche 911. Made from hand-crafted, high-grade carbon fibre, the rear diffuser is available in either a matte or high-gloss finish to complement the twin centrally located tailpipes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DI-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Carrera /S/4/4S/GTS 2017>>
The diffuser is perfectly styled to add a stunning visual touch to the rear of the Porsche 911. Made from hand-crafted, high-grade carbon fibre, the rear diffuser is available in either a matte or high-gloss finish to complement the twin centrally located tailpipes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DI-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Fits:
Porsche 911 (991.2) Carrera / S / 4/ 4S / GTS 2017>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
L-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
For Porsche sport exhaust system only
Fits:
Porsche 911 (991.2) Carrera / S / 4 / 4S/ GTS 2017>>
Built from high-grade, heat-resistant, ultra-lightweight titanium alloys – which are sandblasted and coated for durability – the Slip-On Line is the first step in exhaust modification. Delivering weight savings in excess of 35% over stock, while increasing performance, the exhaust uses the latest innovative technologies in its construction, including parts cast in Akrapovič's in-house foundry. It is perfectly tuned to give a unique sound to the turbocharged boxer engine and is finished with two beautiful tailpipes to add to the aesthetic pleasure. Designed to replace the Porsche sport system, the Slip-On Line can also be used with the optional stainless-steel link pipe set to further improve sound and performance.
Fitment notice: The system is designed to replace the Porsche sport exhaust system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Fits:
Porsche 911 (991) GT3 RS 2016>>
Top the system off with a pair of eye-catching double round tailpipes, made of high-grade titanium. Made specifically for the GT3 RS (991) version to withstand the higher temperatures at this distance from the bumper.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TP-PO991RS
The product you are viewing cross references to these numbers
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Weight:
- minus 0.1 kg / 0.2 lb
Fits:
Porsche 991 (911) Turbo/Turbo S 2014>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DI-PO
The product you are viewing cross references to these numbers
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
Fits:
Porsche 991 (911) Turbo/Turbo S 2014>>
TECHNICAL DATA
** measured with: Porsche 911 Turbo/Turbo S (991) 2014
Maximum power:
- kW: plus 7.1 / 5400 rpm
- HP (m): plus 9.7 / 5400 rpm
- HP (i): plus 9.6 / 5400 rpm
Maximum torque:
- Nm: plus 50.0 / 2300 rpm
- lb-ft: plus 36.9 / 2300 rpm
Weight:
- minus 5.6 kg / 12.4 lb
Please note: When installing Akrapovič aftermarket optional link pipes without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. Akrapovic Delete-R will not eliminate possible engine check errors codes caused by increasing emissions flow.
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
L-PO991T
The product you are viewing cross references to these numbers
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
Fits:
Porsche 991 (911) Turbo/Turbo S 2014>>
The Akrapovič Slip-On Line for the Porsche 911 Turbo / Turbo S is the first stage in the exhaust tuning process and gives this already outstanding car a further step in performance. Made from a high-grade titanium alloy and finished with exquisitely handcrafted carbon fibre and titanium tailpipes, the Slip-On Line reduces weight to aid with handling. Akrapovič's sound engineers have also created a deep and unique sound to make the Porsche 911 Turbo / Turbo S stand out even more. The Slip-On Line can also be used in conjunction with the optional Akrapovič link pipes—with or without cats—which can be added to the system to take the performance to another level. The Slip-On Line is superbly finished with a coating to give greater durability, without altering the look or performance of the system.
TECHNICAL DATA
** measured with: Porsche 911 Turbo/Turbo S (991) 2014
Maximum power:
- kW : plus 5.8 at 3300 rpm
- HP (m) : plus 7.9 at 3300 rpm
- HP (i) : plus 7.8 at 3300 rpm
Maximum torque:
- Nm : plus 14.8 at 2600 rpm
- lb-ft : plus 10.9 at 2600 rpm
Weight:
- minus 6.4 kg / 14.1 lb
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO991TSO-HT
The product you are viewing cross references to these numbers
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
Fits:
Porsche 997.1 GT3 3.6L 2007>>
Porsche 997.2 GT3 3.8L 2010>>
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MTP-PO997GT3H
The product you are viewing cross references to these numbers
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19