Bilstein

Bilstein Shock absorbers rear strut and mounting kit for the rear of Porsche 964 models from 12/1988 to 12/1990 mounting parts by OE Match, covering 964 (911) Carrera 2 and Carrera 4 applications and allowing multiple rear suspension components to be renewed together for consistent fit and behaviour.

What This Product Does Provides the key rear damper and strut mounting components so the rear shock absorbers are correctly located on the Porsche 964 chassis. It supports proper damper alignment, helps manage noise and vibration from the rear suspension, and reduces the likelihood of premature wear caused by tired mounts, bump stops or hardware. 

Kit Includes
2 x Shock absorber strut mounting (96433306404)
2 x Rear shock absorber (24-017350) Bilstein
2 x Hexagon nut (99908462101)
4 x Thrust ring (96433351701)
2 x Shock absorber top mount rubber insert (96433306903)
2 x Shock absorber bump stop (92833351810)
2 x Shock absorber dust cover (96433350201)
2 x Washer (91133351100)
2 x Shock absorber supporting cover (92833355100)

Functions

• Mounts the rear shock absorber securely to the body and suspension
• Helps control damper movement and impact loads through the rear axle
• Supports correct operation of the rear suspension geometry
• Assists in reducing knocks, rattles and harsh impacts from the rear damper area
• Provides matched mounts, bump stops, covers and hardware for the rear shocks

Symptoms of Fault

• Knocking or rattling noises from the rear suspension area
• Harsh or sharp impacts over bumps where bump stops or mounts have deteriorated
• Unsettled, vague or unstable feel from the rear of the vehicle
• Visible cracking, perishing or distortion in rear shock mounts, inserts or hardware
• Signs of premature rear damper wear or movement at the mounting points

Why Replacement Matters Rear damper mounting parts on the 964 are often refreshed at the same time as new rear shock absorbers to avoid reusing aged top mounts, bushes or hardware that can undermine damping control. An OE Match kit allows several related rear suspension parts to be replaced together so components are compatible with each other and with the intended Porsche specification. This approach can help maintain consistent rear axle behaviour on both Carrera 2 and Carrera 4 models as they age, while reducing the chance that worn supporting parts cause noise or accelerated wear on new dampers.

Fits

• Porsche 964 (911) (1989–1994)
• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• 
  

FAQs

• Q: Is this type of kit vehicle-specific?
  A: Kits of this kind are usually specified for particular Porsche models and production years, so confirm coverage for your 964 (including model year and Carrera 2/Carrera 4 variant) before use.
• Q: Does a kit like this normally include all one-time-use hardware?
  A: Not in every case. Use the listed or supplied contents to verify whether additional bolts, clips or other hardware need to be sourced separately.
• Q: Any installation tip for suspension kits on a 964?
  A: Compare the kit contents against the relevant Porsche PET diagram and your planned work so you know exactly which mounts and fixings are included and what else you may wish to renew while access is available.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-017350KIT.1

The product you are viewing cross references to these numbers

Shock absorber rear strut and mounting kit for Porsche 964 (911) models from 1991 onwards, combining Bilstein rear dampers with  OE Match matching mounts and hardware for the rear suspension.

Kit contents
2 x Rear shock absorber strut mounting 96433305900
2 x Rear shock absorber Bilstein 24-015479
2 x Hexagon nut 99908462101
6 x Shock absorber washer 96433310700
2 x Rear shock absorber bump stop 96433310500
2 x Rear shock absorber dust cover 96433310600
2 x Washer 91133351100
2 x Rear shock absorber threaded sleeve 96433351100

What This Product Does
This kit groups the main rear shock absorber components for the Porsche 964 so the damper, mount and associated hardware work together as intended. The upper mounts and sleeves provide the interface between the Bilstein damper and the body while bump stops and dust covers help protect the damper shaft and manage suspension travel.

Functions
• Supports and locates the rear shock absorber at the chassis mounting points
• Helps maintain correct rear suspension alignment and geometry
• Provides mounting hardware matched to the damper and mount components
• Helps limit harsh bottoming through bump stops
• Shields the damper rod from dirt and debris using dust covers

Symptoms of Fault
• Knocking or clunking noises from the rear over bumps
• Rattles linked to loose or perished rear mounting hardware
• Unsettled or inconsistent feel from the rear suspension
• Visible cracking or deterioration of rear top mounts, bump stops or dust boots
• Signs of accelerated wear on rear dampers due to poor support or contamination

Why Replacement Matters
On Porsche 964 models the rear struts, mounts and related hardware are subject to continuous load, movement and exposure to the elements. Over time, rubber parts can harden or split and metal components can corrode or wear, leading to noise, reduced damping control and less precise geometry. Replacing mounts, bump stops, dust covers and hardware alongside new rear dampers is a common approach on these cars, helping to avoid reusing tired parts and reducing the likelihood of repeat labour if noises or play remain after damper replacement.

Fits
• Porsche 964 (911) (1989–1994)
• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• Porsche 964 (911) Turbo 3.3L 1991–93
• Porsche 964 (911) Turbo 3.6L 1991–93

FAQs
• Q: Should rear strut mounts and hardware be renewed with new rear dampers?
  A: They are commonly replaced at the same time, especially if original or showing wear, to avoid reusing aged mounts and fixings.
• Q: Could rear knocking come from components other than the shock absorber itself?
  A: Yes, rear top mounts, drop links and suspension bushes are frequent sources of knocks and should be checked together.
• Q: Any practical tip when using a complete kit like this?
  A: Compare the kit components with the Porsche parts diagram and your existing hardware before starting work so you understand what is included and what may still be required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-015479KIT.1

The product you are viewing cross references to these numbers

Bilstein Sports B6 front and rear shock absorbers for Porsche 997 Carrera 4, Carrera 4S and Turbo models from 07/2004 with electronic suspension control, offering PASM-compatible damping tailored to these all-wheel-drive 911s.

What This Product Does These Bilstein B6 Sports dampers replace the original front and rear shock absorbers on PASM-equipped 997 C4, C4S and Turbo models. They are designed to work with the factory electronic suspension control, helping maintain consistent damping behaviour across selected modes while renewing worn or leaking original units.

Functions

• Support PASM-equipped suspension with compatible damping characteristics
• Control vertical wheel and body movement over bumps
• Help maintain stable tyre contact with the road surface
• Assist in keeping the car composed during braking and acceleration
• Work with the factory control system to vary damping by mode
• Contribute to a tidy, well-maintained suspension setup when refreshing other components

Symptoms of Fault

• Excessive bouncing or floaty, unsettled ride
• Knocking noises from the suspension area over bumps
• Visible oil leaks on the damper bodies
• Uneven or accelerated tyre wear
• PASM warning messages or inconsistent behaviour between modes
• Car feeling less composed in quick direction changes

Why Replacement Matters Over time, PASM dampers can suffer from internal wear, oil leakage and age-related deterioration, especially on higher-mileage 997 models. Replacing tired units with PASM-compatible Bilstein B6 Sports shock absorbers helps restore predictable damping response so the adaptive system can function as intended. This supports stable handling, consistent behaviour between modes and a more cohesive feel when combined with service items such as mounts and bushes.

Fits

• Porsche 997 (911) MK1 2005–2008
  • 997 MK1 Carrera 4 3.6L 2005–08
  • 997 MK1 Carrera 4S 3.8L 2005–08
  • 997 MK1 Turbo 2007–09
• Porsche 997 (911) MK2 2009–2012
  • 997 MKII Carrera C4 3.6L 2009–12
  • 997 MKII Carrera C4S 3.8L 2009–12
  • 997 MKII Turbo 2010–13

FAQs

• Do these work with PASM?
  They are intended for Porsche models with electronic suspension control and are designed to operate with the PASM system when correctly matched to the vehicle.
• Should dampers be replaced in pairs or as a full set?
  They are typically renewed in axle pairs (both fronts or both rears), with many owners choosing to replace all four at the same time on higher-mileage cars.
• Is an alignment required after installation?
  An alignment check is usually recommended after suspension work to confirm geometry is within specification.
• Anything else to replace at the same time?
  It is common to inspect and, if necessary, renew top mounts, bushes and any worn hardware while access is available.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSION.997.B6KIT

The product you are viewing cross references to these numbers

Bilstein Sports B6 Front & Rear shock absorbers & Lowering springs with PASM Porsche 991 C2

Included H&R lowering springs bring the vehicle down by 30mm 



Fits:

Porsche 991 Carrera C2 3.4L (350Bhp)
Porsche 991 Carrera C2S 3.8L (400Bhp)
Porsche 991 Carrera 2 3.0L (370 Bhp)
Porsche 991 Carrera 2S 3.0L (420 Bhp)
Porsche 991 Cabriolet 2 3.0L (370 Bhp)
Porsche 991 Cabriolet 2S 3.0L (420 Bhp)

Fits cars:
For vehicles with electronic suspension control;
For vehicles with PASM

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23-276727KIT.1

The product you are viewing cross references to these numbers

Bilstein Sports B6 Front & Rear shock absorbers with PASM Porsche 991



Fits:

Porsche 991 Carrera C2 3.4L (350Bhp)
Porsche 991 Carrera C2S 3.8L (400Bhp)
Porsche 991 Carrera C4 3.4L (350Bhp)
Porsche 991 Carrera C4S 3.8L (400Bhp)
Porsche 991 Turbo 3.8L (520bhp)
Porsche 991 Turbo S 3.8L (560Bhp)
Porsche 991 Carrera 2 3.0L (370 Bhp)
Porsche 991 Carrera 2S 3.0L (420 Bhp)
Porsche 991 Carrera 4 3.0L (370 Bhp)
Porsche 991 Carrera 4S 3.0L (420 Bhp)
Porsche 991 Cabriolet 2 3.0L (370 Bhp)
Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
Porsche 991 Cabriolet 4 3.0L (370 Bhp)
Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
Porsche 991 Targa 4 3.0L (370 Bhp)
Porsche 991 Targa 4S 3.0L (420 Bhp)
Porsche 991 Turbo Coupe 3.8L (540 Bhp)
Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)

Fits cars:
For vehicles with electronic suspension control;
For vehicles with PASM

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23-276727KIT

The product you are viewing cross references to these numbers

Bilstein B4 FRONT Shock Absorbers & mountings. 



Bilstein Replacement for the Original Spec

Fits:
Porsche 996 C2 3.6L Carrera
Porsche 996 C2 S 3.8L Carrera
For vehicles with standard chassis, For vehicles without PASM, For vehicles without electronic suspension control

Porsche 997 C2 / C2S - Cars with Standard chassis (Option code: I029)

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22-147455KIT

The product you are viewing cross references to these numbers

Bilstein B4 FRONT Shock Absorbers & mountings.  19-194875 / 19-194899

Bilstein Replacement for the Original Spec



Fits:
Porsche 958 Cayenne 3.0L DIESEL 06/2010>>
Porsche 958 Cayenne S 3.0L 06/2010>
Porsche 958 Cayenne 3.6L 06/2010>
Porsche Cayenne TURBO / S 4.8L 06/2010>
Porsche Cayenne S Hybrid 3.0L 06/2010>
For vehicles with standard chassis;
For vehicles without PASM;
For vehicles without pneumatic suspension

Please Note:
Price is for each damper you will need to buy 2

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19-194875

The product you are viewing cross references to these numbers

Bilstein B4 REAR shock absorbers & mounting kit 

Bilstein Replacement for the Original Spec

Fits:
Porsche 958 Cayenne 3.0L DIESEL 06/2010>>
Porsche 958 Cayenne S 3.0L 06/2010>
Porsche 958 Cayenne 3.6L 06/2010>
Porsche Cayenne TURBO / S 4.8L 06/2010>
Porsche Cayenne S Hybrid 3.0L 06/2010>
For vehicles with standard chassis;
For vehicles without PASM;
For vehicles without pneumatic suspension

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Please Note:
Price is for each damper you will need to buy 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19-194882KIT.1

The product you are viewing cross references to these numbers

Bilstein B4 Damptronic Front & Rear Shock Absorber & VTF Adjustable Lowering Spring 

Bilstein B4 OE Replacement (DampTronic) Bilstein B4 OE Replacement (DampTronic) dampers are engineered as direct replacements for factory electronically adjustable suspension systems found on many European vehicles. Designed to meet or exceed original equipment specifications, these dampers preserve the vehicle’s factory ride comfort, handling characteristics, and electronic functionality. Ideal for drivers seeking to restore original performance, Bilstein B4 DampTronic dampers deliver consistent control, refined ride quality, and long-term reliability—backed by Bilstein’s globally recognized engineering and quality standards. 

H&R H&R VTF suspension kits are the ideal solution for vehicles equipped with factory electronic shocks. Designed to integrate seamlessly with original electronic struts and dampers, VTF kits retain full electronic functionality while enhancing overall handling performance. Precision-engineered spring rates deliver excellent ride comfort while reducing body roll and improving balance and control. Every H&R component is manufactured in Germany and built to the highest standards of strength, durability, and performance.

981 & 982 Chassis Boxster and Cayman Lowering Amount with PASM

Front Lowering: 0.4"-1.0"
Rear Lowering: 0.8"

  

Fits cars:
- with PASM; with electronic suspension control; (I475)
- with PASM without lowering (I477)

Fits:
Porsche Boxster 981 2.7L 2012-16
Porsche Boxster S 981 3.4L 2012-16
Porsche Boxster 718 2.0L Manual (300 Bhp)
Porsche Boxster 718 2.0L PDK (300 Bhp)
Porsche Boxster S 718 2.5L Manual (350 Bhp)
Porsche Boxster S 718 2.5L PDK (350 Bhp)
Porsche Boxster T 718 2.0L Manual (300 Bhp)
Porsche Boxster T 718 2.0L PDK (300 Bhp)
Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche 991 Carrera 2 3.0L (370 Bhp)
Porsche Cayman 2.7L 981 2013-16
Porsche Cayman S 3.4L 981 2013-16
Porsche Cayman 718 2.0L Manual (300Bhp)
Porsche Cayman 718 2.0L PDK (300Bhp)
Porsche Cayman S 718 2.5L Manual (350Bhp)
Porsche Cayman S 718 2.5L PDK (350Bhp)
Porsche Cayman T 718 2.0L Manual (300Bhp)
Porsche Cayman T 718 2.0L PDK (300 Bhp)
Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)

Please Note: Price is for each damper you will need to buy 2.

The product benefits at a glance:
• Perfectly adapted to suit series-production electronic adjustment system
• Outstanding driving dynamics in the standard settings
• High power reserves for maximum safety
• Drive as though it's the first time, every time
• High OEM quality
• BILSTEIN gas pressure technology

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23-276710KIT.2

The product you are viewing cross references to these numbers

Bilstein Sports B6 FRONT & REAR shock absorber & Lowering kit. Porsche Macan. Bilstein B6 Performance Dampers are a premium performance upgrade over original equipment dampers. Featuring a monotube design with application-specific valving, they are engineered to enhance handling precision and overall vehicle control. Each damper is extensively tested to meet or exceed OE standards, delivering improved safety, sharper handling, and the renowned durability and quality Bilstein is known for.   - for vehicles with electronic suspension control PASM

H&R VTF Lowering Springs are the ideal solution for vehicles equipped with electronic shocks. Designed to work seamlessly with the factory electronic struts and dampers, these variable-rate springs provide excellent ride comfort while significantly reducing body roll for improved balance and control. All H&R components are engineered for strength, resilience, and long-term durability, and are 100% manufactured in Germany. Lowering Range: Front: 1.6"–2.4" Rear: 1.6"–2.0"

 

Fits:
Porsche Macan 2.0L V6
Porsche Macan S 3.0L V6
Porsche Macan S Diesel 3.0L V6
Porsche Macan Turbo 3.6L V6

Fits cars:
- for vehicles with electronic suspension control,
- for coil-spring suspension vehicles

Please Note:
Price is for each damper you will need to buy 2

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23-246157KIT

The product you are viewing cross references to these numbers

Bilstein Sports B6 REAR shock absorber & mountings. Kit includes all necessary components to replace the rear shock absorbers on a 95B Porsche Macan equipped with option code 1BA (standard coil spring suspension) and without Porsche Active Suspension Management (PASM).

The kit features upgraded Bilstein B6 shock absorbers, offering firmer damping and improved performance compared to the factory units.

Bilstein recommends retaining the original factory coil springs when using the B6 shock absorbers for optimal results.- cars without electronic suspension control PASM

Fits:
Porsche Macan 2.0L V6
Porsche Macan S 3.0L V6
Porsche Macan S Diesel 3.0L V6
Porsche Macan Turbo 3.6L V6

Fits cars:
- without electronic suspension control

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Please Note:
Price is for each damper you will need to buy 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-245807KIT

The product you are viewing cross references to these numbers

Bilstein Sports B6 FRONT shock absorbers & mountings.  Products required to replace the rear shock absorbers on a 95B Porsche Macan equipped with option code 1BA (standard coil spring suspension) and without Porsche Active Suspension Management (PASM).

The kit features an upgraded Bilstein B6 damper, delivering improved handling and firmer damping compared to the factory shock.

Bilstein recommends pairing the B6 shock absorber with the original factory coil springs for optimal performance and ride quality. - cars without electronic suspension control.

Fits:
Porsche Macan 2.0L V6
Porsche Macan S 3.0L V6
Porsche Macan S Diesel 3.0L V6
Porsche Macan Turbo 3.6L V6

Fits cars:
- without electronic suspension control

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Please Note:
Price is for each damper you will need to buy 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-245791KIT

The product you are viewing cross references to these numbers

Bilstein Shock absorbers & mounting kit, Rear. Porsche Macan. The suspension shock mount is a vital component that attaches the shock absorber to the vehicle’s chassis or body. It serves as the connection point between the shock absorber and the vehicle, allowing controlled movement while cushioning impacts from the road. Typically constructed from a combination of metal and rubber, the shock mount provides the strength needed for secure mounting and the flexibility required to absorb vibrations and road shocks.  

Fits:
For vehicles with standard chassis (I1BA)
Porsche 95B Macan 2014-18
Porsche Macan II 2019>>

Diagram ref no 2, 3, 5, 6 ,7,8

Symptoms of Suspension Shock Absorber Mount Failure

Clunking or Banging Noises:
A worn or damaged shock mount may produce clunking, knocking, or banging sounds, particularly when driving over bumps, potholes, or uneven surfaces. These noises occur because the shock absorber is no longer firmly secured, allowing excessive movement or rattling.

Increased Body Roll or Bouncing:
When a shock mount begins to fail, it can reduce the effectiveness of the shock absorber. This may result in excessive body roll during cornering or increased bouncing when traveling over bumps, negatively affecting ride comfort and vehicle stability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19-243177KIT

The product you are viewing cross references to these numbers

BILSTEIN B6 DampTronic® shock absorber provides all the necessary components to replace the rear shock absorbers on a 95B Macan equipped with option code 1BH—standard coil spring suspension with Porsche Active Suspension Management (PASM).

The kit features upgraded Bilstein B6 dampers at all four corners, delivering firmer damping and improved handling performance compared to the factory setup. Bilstein recommends retaining the original coil springs when pairing them with B6 shock absorbers for optimal results.- for vehicles with electronic suspension control PASM

Fits:
Porsche Macan 2.0L V6
Porsche Macan S 3.0L V6
Porsche Macan S Diesel 3.0L V6
Porsche Macan Turbo 3.6L V6

Fits cars:
- for vehicles with electronic suspension control,
- for coil-spring suspension vehicles

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Suspension Shock Absorber Replacement Kit

A shock absorber replacement kit is designed to restore proper suspension function and ride control. These kits typically include new shock absorbers along with essential mounting hardware and seals. Shock absorbers regulate spring movement by controlling rebound and compression, helping maintain stability and comfort. Common signs of worn or failing shocks include excessive bouncing, increased body roll during cornering, nose dive under braking, uneven tire wear, and, in some cases, visible fluid leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

20-246167KIT

The product you are viewing cross references to these numbers

Porsche 996 911 Carrera Rear Shock Absorber Kit  Fits cars WITH M030 sports suspension.

Restore the precise ride quality and confident handling your Porsche 996 911 Carrera was built to deliver. Over time, shocks gradually wear down, making changes in handling and comfort hard to notice until performance begins to fade. This complete shock absorber kit includes nearly everything you need to replace your worn components—shock mounts, bump stops, dust boots, and all necessary hardware. 

Fits:
Porsche 996 3.4L Carrera
Porsche 996 3.6L Carrera
Porsche 996 3.6L Carrera S
Porsche 996 3.4L Carrera 4,
Porsche 996 3.6 Carrera 4,
Porsche 996 3.6 Turbo,
Porsche 996 3.6 Turbo S

With fresh shocks installed, you can expect:

Sharper, more responsive handling Improved ride comfort and stability Reduced braking distances More even tire wear

Note: Coil springs are not included and can be purchased separately if needed. The original washers and spacers can typically be reused unless they show signs of damage upon inspection.

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-113359KIT.1

The product you are viewing cross references to these numbers

Shock absorber kits include two Bilstein B4 Touring shocks, along with all essential hardware and rubber components that commonly wear out over time—such as bump stops, strut mounts, and spring seats.

Please note that coil springs are not included, as they vary by model and vehicle options. If your springs are worn, rusty, sagging, or broken. 

Fits:
Porsche 955 Cayenne 3.2L V6 2003 - 2006
Porsche 955 Cayenne S 4.5L V8 2003 - 2006
Porsche 955 Cayenne Turbo 4.5L 2003 - 2006
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007 - 2010
Porsche 957 Cayenne 3.6L 2007 - 2010
Porsche 957 Cayenne S/GTS 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007 - 2010

Fits cars:
- Cars without air suspension / for vehicles with standard suspension

Suspension Shock Absorber Kit

A suspension shock absorber kit includes the key components needed to restore proper ride quality and handling. Each kit typically contains new shock absorbers along with essential mounting hardware and seals. Working together, these parts help control spring rebound and dampen road impacts, ensuring a smoother and more stable driving experience.

Common signs that your shock absorbers may be failing include a bouncy or unstable ride, excessive body roll in corners, noticeable nose-diving during braking, uneven tire wear, and in some cases, visible fluid leakage from the shocks.

Suspension Shock Absorber Failure Symptoms

• Bouncy ride: The vehicle continues to bounce after hitting bumps or dips in the road. 
• Nose dive when braking: The front end dips noticeably under braking. 
• Excessive body roll: The vehicle leans more than normal when cornering, reducing stability. 
• Uneven tire wear: Irregular patterns—such as cupping or scalloping—due to poor road contact and inadequate damping.       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19-194486KIT

The product you are viewing cross references to these numbers