do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
DesignTek
DesignTek for Porsche
DesignTek parts for Porsche models from Design911.
A Quick Look at DesignTek
DesignTek information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where DesignTek is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose these parts include fixing common wear points, returning a Porsche to standard performance, and managing running costs on older cars.
- Common triggers for replacement are leaks, knocks, worn mounts, poor ride quality, and intermittent operation of affected components.
- Watch for real-world symptoms such as hesitation, flat spots, noisy or restricted intake, warning lights, rough running, and reduced fuel economy.
- Before upgrading or tuning, ensure underlying mechanical issues are resolved rather than masked by new parts.
- When servicing or modifying, inspect adjacent components at the same time to avoid repeat labour or missed wear items.
- Check what fittings, seals, and hardware are included with each part and add any required extras so the job can be completed in one go.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Tuning — Engine tuning components for Porsche are typically used to improve drivability, throttle response, and power delivery, or to support other hardware changes where listed.
- Confirm the engine’s health and check for boost or vacuum leaks before any tuning work.
- Review sensor data, oil and coolant temperatures, and fuel delivery to ensure the car is mechanically sound.
Air Filters — Air filters for Porsche applications help maintain correct airflow while protecting the engine from dust and debris, with changes usually driven by routine service or performance goals.
- Replace filters more frequently if the car is used in dusty or harsh environments.
- Avoid over-oiling reusable filters to reduce the risk of sensor contamination where fitted.
Air Induction Kits — Air induction kits for Porsche are selected to alter airflow and sound and, where design allows, to reduce restriction or manage intake temperatures as part of a wider tuning package.
- Ensure the kit maintains proper sealing and sensible intake air temperatures to protect drivability.
- Check mounting security and routing after installation to minimise rattles, hot-air ingestion, or water exposure.
Service Parts — Service parts for Porsche are changed as part of scheduled maintenance to protect the engine and supporting systems, helping preserve performance, reliability, and efficiency.
- Use correct-specification oils, filters, plugs, and fluids and keep a clear record of what has been replaced.
- Shorten service intervals if the car sees frequent short journeys or hard use.
Air Filters — Replacement and performance air filters for Porsche applications are used to maintain clean, consistent airflow and can also support specific performance or motorsport needs where appropriate.
- Inspect the airbox or housing when changing the filter and ensure the seal seats evenly all the way around.
- If a performance filter is used, follow the maker’s cleaning and re-oiling instructions carefully.
Explore DesignTek at Design911
View the current DesignTek range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Front and rear strut assemblies with top mounts
Fits:
Porsche 992 GT3 - 2021 to 2024
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO02
The product you are viewing cross references to these numbers
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 992 Carrera 4 Cabriolet - 2019 to 2024
Porsche 992 Carrera 4S Cabriolet - 2019 to 2024
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO02
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 992 Carrera 4 Coupe - 2019 to 2024
Porsche 992 Carrera 4S Coupe - 2019 to 2024
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO02
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 992 Carrera 2 Cabriolet- 2019 to 2024
Porsche 992 Carrera 2S Cabriolet- 2019 to 2024
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO02
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 992 Carrera 2 Coupe - 2019 to 2024
Porsche 992 Carrera 2S Coupe - 2019 to 2024
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO01
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 991.2 GT32RS - 2016 to 2019
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO01
The product you are viewing cross references to these numbers
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 991.2 GT3 RS - 2016 to 2019
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO01
The product you are viewing cross references to these numbers
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 991 GT3 - 2014 to 2019
For cars WITHOUT Hydraulic Lift System (Option 474)
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO01
The product you are viewing cross references to these numbers
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 997 Carrera 4 - 2005 to 2012
Porsche 997 Carrera 4S - 2005 to 2012
Porsche 997 turbo - 2007 to 2012
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO04
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 997 Carrera GT3 - 2007 to 2011
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO041
The product you are viewing cross references to these numbers
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 991.1 Carrera 2 - 2012 to 2016
Porsche 991.1 Carrera 2S - 2012 to 2016
Porsche 991.2 Carrera 2 - 2016 to 2019
Porsche 991.2 Carrera 2S - 2016 to 2019
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO031
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 997 Carrera 2 - 2005 to 2012
Porsche 997 Carrera 2S - 2005 to 2012
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO0
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 996 Carrera GT3 - 1995 to 2005
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO031
The product you are viewing cross references to these numbers
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 996 Carrera 4S 3.6ltr - 2001 to 2005
Porsche 996 turbo - 2000 to 2005
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO03
The product you are viewing cross references to these numbers
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Front and rear strut assemblies with top mounts
Fits:
Porsche 996 Carrera 2 3.4ltr - 1997 to 2001
Porsche 996 Carrera 4 3.4ltr - 1997 to 2001
This kit is specifically designed for rally-asphalt use. It not only stabilizes the vehicle but also effectively absorbs bumps from uneven road surfaces.
The standard setup includes a wishbone coil over design with 44mm pistons in the struts. These larger pistons allow for a greater volume of shock oil, ensuring durability and preventing shock fatigue, even with prolonged use.
- The Pillowball Top Mount allows for camber adjustments on the front tires, improving cornering performance and vehicle stability.
- The spring rate and damping settings are primarily designed for rally asphalt use.
- This unit includes adjustable ride height and a 36-way damping system to accommodate different road conditions.
- The ride height can be lowered by 60–100mm from the original factory setting, as a reference.
- Even at high speeds, it prevents lateral sliding during sharp turns.
- This product is not suitable for street, rally gravel, or rally snow conditions.
- For any applications not listed, we offer customization to meet specific customer requirements.
- The 3D Pillowball Top Mount also allows for both camber and caster adjustments as an option for customers.
- All applications listed on our website are for 2WD models unless otherwise specified as 4WD.
Pillowball Top Mount (fitted to front shock absorber assemblies)
The pillowball top mount allows for camber angle adjustment, improving your vehicle's handling and stability by up to 10%. However, it may produce a slight noise when going over large bumps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
KPO0
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
400 cell cats like the OE Porsche version.
Fits:
Porsche 955 Cayenne Turbo / Turbo S vehicles (2002-2007)
Exhaust Primary Catalyst Converters for Porsche Cayenne Turbo, specifically designed for the 955 model. These 400-cell catalytic converters mirror the characteristics of the original Porsche version, ensuring compatibility and functionality. Made by DesignTek, these cats are crafted to fit seamlessly into your vehicle’s exhaust system, offering the same cell structure as the factory model.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95511302X10
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed