Ninemeister

9m Equal length exhaust manifold set in stainless steel. 
Sold as a pair - left and right

Fits:
Porsche 997.1 turbo - 2007 to 2008
Porsche 997.1 GT2 - 2007 to 2008

Made from SS321L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 20hp minimum and 20nm
• Improved throttle response
• Direct fit. No remap required but recommended
• No CEL (check engine light)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M99611110176

The product you are viewing cross references to these numbers

Billet camshaft follower kit.
Complete kit of 12 x rocker arm, 12 x rocket shaft and 12 x adjuster screw

Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

9m Racing 911, 964 and 993 camshaft follower kit - the best items you can buy for all high rpm and high lift race, air-cooled engine applications.

The 911 / 964 and 993 rockers are CNC machined from triple melt (high purity) alloy steel, hardened, ground, micro-finished and diamond-like carbon (DLC) coated to reduce friction and wear on the pad. 911/964 rockets from standard are drilled for oil holes, while the 993 have no such holes. Ours, come drilled and fit both applications

Each rocker has detailed CNC machined work to reduce the weight to a minimum which allows for full contact on high lift cam lobes for up to 15mm of valve lift.

The 911 / 964 and 993 mechanical rocker shafts are also DLC coated to run in the steel bore of the rockers with less friction & wear compared to stock bronze bushes.

To complete the installation are the DLC coated "elephants feet" adjusters which significantly lowers the wiping friction between the foot and top of the valve to reduce valve and valve guide wear.

Diagram ref no 27, 31 and 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M93010504300

The product you are viewing cross references to these numbers

9m Titanium Race exhaust silencer bypass x pipe 

Fits:
Porsche 997.1 turbo - 2007 to 2008

9m 997.1 turbo X pipe race exhaust

• Exhaust reuses the stock tailpipes (tailpipes not included)
• Titanium X pipe non silenced construction
• 30hp+ gains
• Weighs approximately 4kg less than factory exhaust 20kg a massive 16kg saving 

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M9711102773

The product you are viewing cross references to these numbers

9m trackday silenced exhaust tailpipe set. 

Fits:
Porsche 992 GT3 - 2021 to 2024
Porsche 992 GT3 RS - 2021 to 2024
Porsche 992 ST - 2021 to 2024
Porsche 992 Touring - 2021 to 2024

Designed as a direct fit, tailpipe replacement to fit to original OEM Porsche silencer. 

Constructed from 304 stainless steel  with a lifetime guarantee they will reduce sound at static by 4db or more.

Simple to bolt on using the provided hardware, no more than 20 minutes.

Click 'Zoom in' for large parts diagram.
Replaces diagram ref no 1 or

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT251697SIL

The product you are viewing cross references to these numbers

Titanium stud and nut kit, 
Set of 6 studs and 6 M8 nuts



Fits:
Porsche 718 Boxster Spyder RS - 2019 to 2024
Porsche 718 Cayman GT4 RS - 2019 to 2024

9m 718 Cayman GT4 RS / 718 Boxster Spyder RS OPF to silencer titanium stud kit

This is the ideal solution to future proof your exhaust studs from the OPF pipes to exhaust silencer as they are resistant to corrosion.
Our Titanium alloy studs and nuts will not rust after repeated heat cycles and are constructed from Grade 5 Ti6Al4V titanium, as strong as steel, but 40% lighter.

Click 'Zoom in' for large parts diagram.
Diagram ref no 6 and 15

Studs and nuts for the flange between 13/14 and 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M718RSTISTUD

The product you are viewing cross references to these numbers

Equal length exhaust manifold set, Race. 
Sold as a pair - left and right

 **Not road legal - Offroad / track use only**

Fits:
Porsche 987.2 Boxster - 2009 to 2012
Porsche 987.2 Boxster S - 2009 to 2012
Porsche 987.2 Boxster Spyder -  2009 to 2012
Porsche 987.2 Cayman - 2009 to 2012
Porsche 987.2 Cayman S - 2009 to 2012
Porsche 987.2 Cayman R - 2009 to 2012

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 15hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit, remap required
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M87113101RKIT

The product you are viewing cross references to these numbers

Sports exhaust valved rear silencer, titanium. 

Fits:
Porsche 718 Boxster Spyder - 2020 to 2024
Porsche  718 Boxster GTS 4.0ltr - 2020 to 2024
Porsche 718 Cayman GT4 - 2020 to 2024
Porsche 718 Cayman GTS 4.0ltr - 2020 to 2024

Constructed from Aerospace grade TC4 titanium precision welded with a lifetime guarantee 

Weighing in at 7kg in total with a weight saving of 8kg over the stock silencer(15kg) 

Fits all Porsche 718 4.0 GT4 /Spyder/GTS vehicles (2020-)

Direct bolt on installation with zero exhaust drone 

Fits original exhaust tips or optional 9m GT4RS titanium style X pipe tips

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M718TISILENCER4.0

The product you are viewing cross references to these numbers

Titanium stud and nut kit, 
Set of 10 studs and 10 M8 nuts

Fits:
Porsche 718 Boxster Spyder - 2019 to 2024
Porsche 718 Boxster GTS 4.0ltr - 2020 to 2024
Porsche 718 Cayman GT4 - 2019 to 2024
Porsche 718 Cayman GTS 4.0ltr - 2020 to 2024

9m 718 GT4/Spyder/GTS OPF to silencer titanium stud kit

This is the ideal solution to future proof your exhaust studs from the OPF pipes to exhaust silencer as they are resistant to corrosion.
Our Titanium alloy studs and nuts will not rust after repeated heat cycles and are constructed from Grade 5 Ti6Al4V titanium, as strong as steel, but 40% lighter.

Click 'Zoom in' for large parts diagram.
Nuts replace diagram ref no 12
Studs fit on diagram ref 8 and 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M718TISTUD

The product you are viewing cross references to these numbers

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 992.1 Carrera / Carrera S - 2019 to 2024
Porsche 992.1 Carrera 4 / Carrera 4S - 2019 to 2024
Porsche 992.1 turbo / turbo S - 2019 to 2024
Porsche 992.1 GT3 / GT3 Touring  - 2019 to 2024

Extended paddle shifters for enhanced control with simple plug-and-play installation
Precise and positive shift feel. The magnetic haptic elements derived from the setup 911 GT3 Cup give them an even crisper force-path curve. They allow a higher operating force and provide precise acoustic feedback for the switching point. 

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow, Blue or White inlay

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 718 Boxster Spyder RS - 2022 Onwards

Extended paddle shifters for enhanced control with simple plug-and-play installation
Precise and positive shift feel. The magnetic haptic elements derived from the setup 911 GT3 Cup give them an even crisper force-path curve. They allow a higher operating force and provide precise acoustic feedback for the switching point. 

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow or Blue inlay

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 718 Cayman GT4 RS - 2022 Onwards

Extended paddle shifters for enhanced control with simple plug-and-play installation
Precise and positive shift feel. The magnetic haptic elements derived from the setup 911 GT3 Cup give them an even crisper force-path curve. They allow a higher operating force and provide precise acoustic feedback for the switching point. 

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow or Blue inlay

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 95B.2 Macan - 2019 to 2021

Extended paddle shifters for enhanced control with simple plug-and-play installation.

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow or Blue inlay

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 991.2 - 2016 to 2019
Porsche 991.2 turbo - 2016 to 2019
Porsche 991.2 GT3 - 2016 to 2019

Extended paddle shifters for enhanced control with simple plug-and-play installation.

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow or Blue inlay

Magnetic PDK billet aluminium paddle shifter set. 
Sold as a pair

Fits:
Porsche 718 Boxster / S / T / GTS - 2017 Onwards
Porsche 718 Spyder - 2019 Onwards
Porsche 718 Cayman / S / T / GTS - 2017 Onwards
Porsche 718 Cayman GT4 - 2019 Onwards

Extended paddle shifters for enhanced control with simple plug-and-play installation.

CNC machined from Billet 6061 aluminum these deliver a precise and responsive shifting experience

Available with Red, Yellow or Blue inlay

Seat recliner bracket set for Fixed lightweight bucket seats. 
Set is for one seat only - 2 required per car

Fits:
Porsche  991 GT3 - 2014 to 2021
Porsche 981 Cayman GT4 - 2016
Porsche 718 Cayman GT4 / GT4 RS - 2019 Onwards
Porsche 718 Spyder - 2019 Onwards

These brackets raise your Porsche LWB (lightweight bucket) seats approximately 25mm at the front, reclining the seat for much better comfort and more headroom when wearing a helmet on trackdays.

Constructed of Billet 6061-T6 material

Hard anodized in black