Nordlicht

Rear Indicator Units Clear/Red with LED bulbs just like the newer 2009 997 models.



To upgrade to the new LED look rear lamps with out changing the rear bumper.

Please note: you will need to reuse your fog light as this will not be with LED function.

These lamps are Plug 'N' Play No extra control units required. For instructions CLICK HERE

Fits:
Porsche 997 Carrera
Porsche 997 C4S
Porsche 997 Turbo
Porsche 997 GT2

The Price is For a PAIR Left & right

For Fitting & Troubleshooting Guide: CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99763100095

The product you are viewing cross references to these numbers

Rear Indicator Units Smoked/Red with LED bulbs just like the newer 2009 997 models.



To upgrade to the new LED look rear lamps with out changing the rear bumper.

Please note: you will need to reuse your fog light as this will not be with LED function.

These lamps are Plug 'N' Play No extra control units required. For instructions CLICK HERE

Fits:
Porsche 997 Carrera
Porsche 997 C4S
Porsche 997 Turbo
Porsche 997 GT2

The Price is For a PAIR Left & right

For Fitting & Troubleshooting Guide: CLICK HERE

Rear Indicator Units Smoked/Red with LED bulbs just like the newer 997 models.



The units have a built in resistor so you don't get errors. They do not come with fitting instructions as they are quite straight forward to fit.

Fits:
Porsche 996 (Non C4S / Turbo / GT2)

The Price is For a PAIR Left & right

For Fitting & Troubleshooting Guide: CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99663100095

The product you are viewing cross references to these numbers

Rear Indicator Units Clear/Red with LED bulbs just like the newer 997 models.



The units have a built in resistor so you don't get errors. They do not come with fitting instructions as they are quite straight forward to fit.

Fits:
Porsche 996 (Non C4S / Turbo / GT2)

The Price is For a PAIR Left & right

For Fitting & Troubleshooting Guide: CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99663100096

The product you are viewing cross references to these numbers

3RD Brake Light, CLEAR

Replacement for the standard rear red brake light strip.

Fits:
- Porsche Carrera 996
- Porsche 996 GT3 MK1
- all RHD and LHD cars

About installation:

Our 3rd Brake LED Lights install just like the factory ones do , there might be a slight modification needed to make it work in some cases only that all depends on the year the car was manufactured, you may have to reverse polarity on the connector of the 3rd brake light, no cutting or welding a simple swap of the wiring, details are available on the installation instructions.

If your car has cruise control (M454 option), you may need to install in line resistor (50W 6RJ) - this resistor is not included but widely available.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99663100099

The product you are viewing cross references to these numbers

New design LED bulb rear indicator units.
They have LED's for running, fog light and brake-lights. The reversing lights and the indicators are standard bulbs



Red / Smoked Lamps

Fits:
Porsche Cayenne 955 2003-06

Set of 2 Lamps

New design LED bulb rear indicator units.
They have LED's for running, fog light and brake-lights. The reversing lights and the indicators are standard bulbs.

Smoked Lamps

Fits:
Porsche Cayenne 955 2003-06

Set of 2 Lamps

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

How to install: CLICK HERE

Twin Beam H4 gas discharge bulb will be Xenon in high and low beam

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HIDH4TWIN

The product you are viewing cross references to these numbers

Interior Lamp / Light. LED Pad with adaptors.

Brighten up the interior of your car. These SMD blocks bring the modern LED look to the inside of your car. They can be used in all the interior and boot spaces.

This product comes complete with interchangeable base adapters, T10/ BA9S and FESTOON to suit all denominations.

Simply remove and replace the existing halogen bulb, with the correct base adapter, attach to the SMD pod and you are done.

CHECK THAT IT WILL FIT IN THE SPACE
* Size – 32mm Length x 20mm Width
* Brilliant white light.
* Sold in single unit set

Please check your bulb type & fitment before ordering as these LED bulbs fit multiple vehicles

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90063110690LED

The product you are viewing cross references to these numbers

Number Plate Light Bulbs (PAIR). High Power LED Festoon 39mm long
This LED bulbs set replaces the dull yellow number plate bulbs.

* No on board error messages.
* 3 SMD LED - 180 degree coverage
* Reverse polarity protection.

Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 986 Boxster 1997-02
Porsche 968 1992-95
Porsche 996

Price is for a Pair
Please check your bulb type & fitment before ordering as these LED bulbs fit multiple vehicles
(Bulbs only number plate unit not included)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90063110590LED

The product you are viewing cross references to these numbers

Daytime running Lights (DRL Look) SET OF 2
Fits:

• Porsche 997 TURBO 2007>>
• Porsche 997 GT2 2007>>
• Porsche 997 MKII Turbo 2009>>
• Porsche 997 MKII GT2 RS 2011>>

New design LED daytime running lamps for Porsche 997 Carrera MKI (Just like the 997 MKII versions have from the factory.), Porsche 997 Turbo and new shape Porsche 957 Cayenne. Low energy LED lamps will automatically activate when the engine starts.



As well as looking great on the vehicle it seems that the EC has since decided to adopt a draft directive that will require all new types of cars and small delivery vans to be equipped with dedicated, low energy consumption DRLs, activated automatically when the engine starts.

The daytime running lamps will go off while indicating and come on again when you stop indicating

These units do not require any control modules they are "Plug & Play", you just need some wiring to the fuse box to make the DRL work.

LED rear lights / taillights converter Module 997.1 to 997.2 LED Lights - European / RoW Conversion Control Units

These control units should be used when converting 997 MKI to the later style 997 MKII look with the new LED REAR LAMPS. These control units will make the new LED lamps function.

For LHD rear lamps the lug on side of plug connection will require removal in order for the plugs to fit.

For more information about fitting conversions Click Here

T10/501 Side repeater bulbs (Amber) for clear lens lamps.
Sold as a Pair