Rennline

Product Description

Rennline's carbon fiber mirror shells are a great way to give your 997 or 987 a subtle yet modern exterior upgrade. 

Made from high quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. 

Installs in minutes re-using the factory hardware.

Contains upper and lower mirror cover sections

Fits:
Porsche 981 Boxster Cayman
Porsche 718 Boxster Cayman
Porsche 991

Product Description

Rennline’s new carbon fiber center console panels are a great way to give your 991/981/718 an OEM+ look and a modern upgrade. 

Made from high quality carbon fiber using the latest technology for a factory fit and finish while adding a bit of style.

• Hand laid carbon fiber construction
• High gloss finish
• Complete replacement for OEM trim panel
• Installs in minutes with no tools necessary

Fits:
Porsche 991.1 
Porsche 991.2 

Product Description

Rennline's carbon fiber fan shroud is a great way to give the engine bay of your 991 an eye catching OEM+ upgrade by replacing the boring plastic unit. 

Made from hand-laid carbon fiber using the latest manufacturing technologies, our shroud is sure to add a completely bespoke feel under the engine lid (deck lid).

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Complete carbon fiber replacement for OEM fan shroud
• Designed from factory shroud using state of the art 3D scanning
• Installs in place of OEM shroud with no adhesive
• Fits all naturally aspirated 991 models
• Factory plaques can be swapped over from OEM shroud
• OEM fit and finish

Fits:
Porsche 991.1 Carrera 2 / Carrera 4
Porsche 991.1 Carrera 2S / Carrera 4S

Product Description

Rennline's carbon fiber rear diffuser is a great way to give the rear of your 991 an eye catching OEM+ upgrade by replacing the boring plastic unit. 

Made from hand-laid carbon fiber using the latest manufacturing technologies, our diffuser is sure to add a completely bespoke feel to the back of your 911 (991.1)

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Complete carbon fiber replacement for OEM diffuser
• Designed from the ground up using state of the art 3D scanning technology
• Installs in place of OEM unit with no adhesive
• Fits all 991.1 Carrera/S models with standard bumpers
• Does not fit Turbo or GT models
• OEM fit and finish

Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Product Description

Rennline's Adjustable Seat Rail Mounted Cup Holder keeps your interior safe from spills while ensuring you stay hydrated. With spring loaded ball detents in the ratcheting arm, your drink of choice stays securely in the position you want it. 
This cup holder attaches directly to the seat rail, so when not in use you can swing your cup holder under your seat and out of sight.

• Interior Diameter of cupholder opening is 3.125"
• Not compatible with Rennline Fire Extinguisher Mount.
• Does not fit vehicles with factory sport seats due to differences in seat rail design.

Fits:
Porsche 911 - 1965 to 1989
For use with Rennline FE1314 fire extinguisher mount only

Product Description

Rennline's Adjustable Cup Holder keeps your interior safe from spills while ensuring you stay hydrated. With spring loaded ball detents in the ratcheting arm, your drink of choice stays securely in the position you want it. 
This cup holder attaches directly to the seat and is made entirely of aluminum. 
When not in use you can swing your cup holder out of sight.

• Fits '65-'89 Porsche 911 with Rennline FE13.14 extinguisher mount
• May fit other cars with our fire extinguisher mounts depending on height of seat rails
• Spring loaded ball detents for adjustability
• Billet aluminum design
• Durable black powdercoat finish
• ID of cupholder opening is 3.125"

Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 997 - 1997 to 2005

Product Description

Drop some weight and gain some leg room in your 996 or 986 Boxster with this carbon fibre centre console delete kit. 

Modeled after the center console in the 996 GT3 and made from hand laid carbon fiber, our console delete kit comes with everything you need for a painless installation. 

Previously installed Rennline phone mount? 
No problem, see our PM0195 phone mount kit made specifically for 986 / 996 with the center console deleted.

• High quality hand-laid carbon fiber construction
• Modeled from OEM GT3 console
• Durable high gloss finish
• Works on any 986/996 models
• Some models may require HVAC unit to be relocated to upper console
• CD changer must be relocated or removed if equipped

Fits:
Porsche 997 turbo Gen 1 - 2007 to 2009
Porsche 997 turbo Gen 2 - 2010 to 2013

Product Description

Rennline’s carbon fibre 997 Turbo intake ducts are a great way to give your 997's engine bay a modern facelift and these work in conjunction with our 997 Turbo Intake, to increase airflow and performance. 

Made from high quality carbon fibre using the latest technology, our intake ducts are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. Installs in minutes using new factory hardware.

Available in Red, Black, Silver and Yellow 

Fits:
Porsche 987 Boxster / Boxster S - 2005 to 2012
Porsche 987 Cayman / Cayman S - 2006 to 2012
Porsche 997 Carrera / Carrera 4 Coupe - 2005 to 2012
Porsche 997 Carrera 2S / Carrera 4S Coupe - 2005 to 2012
Porsche 997 Turbo Coupe - 2006 to 2012
Porsche 997 GT3 - 2006 to 2012

Product Description

Rennline's new RS door pull kit for the 987/997 is a bolt in solution that allows you to convert your existing interior door handles to the highly coveted GT3RS pulls.
No longer do you have to piece together your own kit from the expensive OEM Porsche parts so save time and money with our complete kit.
Does not work with 911 Cabriolet or Targa.

To install, simply remove the one bolt holding the factory door handle and fit our RS Door Handle in place.

All components constructed from CNC machined 6061 aluminum or carbon fiber

• Comes with Black, Silver, Yellow and Red nylon pull straps
• Convert your existing door handle assemblies
• Everything you need in one kit
• OEM Fit and Finish
• All hardware included
• Install time is 1-2 hours with basic hand tools

Fits:
Porsche 991.1 Carrera / Carrera 4 - 3.4ltr
Porsche 991.1 Carrera 2S / Carrera 4S - 3.8ltr

Product Description
Increase the sound, gain some power and torque while reducing weight at the same time with our new race exhaust for the 991.1 Carrera. 
With this Race Exhaust both side and center mufflers are deleted and replaced with a free flowing straight pipe design that bolts directly to the manifolds. 
The result is a lightweight, higher performing and aggressive sounding exhaust that is not for the faint of heart. 
Designed and manufactured with the passion and quality you have come to expect from Rennline Automotive.

Not for road/street use

• Constructed from mandrel bent 304 stainless steel
• Weighs only 8lbs (50lbs less than stock system)
• Deletes side and center mufflers (check local laws regarding muffler removal)
• Retains catalytic converters
• Mounts directly to exhaust manifolds
• 5whp/9ft-lbs. gains over stock (3rd party dyno tested with stock intake/ECU software)
• Fits 991.1 naturally aspirated 3.4L-3.8L models only
• For off road use only
• Installs in less than two hours without rear bumper removal

Porsche 991.1 Carrera 2 / Carrera 4 3.4ltr
Porsche 991.1 Carrera 2S / Carrera 4S 3.8ltr

Product Description

Increase the sound and gain some mid-range torque while reducing weight with our new street exhaust for the 991.1 Carrera. 
This system deletes the center muffler while retaining the side suitcase mufflers which results in an OEM+ upgrade that is completely daily drivable. 

Designed and manufactured with the passion and quality you have come to expect from Rennline Automotive.

• Constructed from mandrel bent 304 stainless steel using state of the art manufacturing processes
• Deletes center muffler and retains side mufflers
• Increases exhaust note without sacrificing comfort
• Factory fit and finish
• Reuses OEM hardware
• Fits 991.1 naturally aspirated 3.4ltr and 3.8ltr models only
• Bumps up mid-range torque
• Installs in less than two hours without rear bumper removal