Rennline

Rennline Remote Pull Cable Kit with T- Handle
Works with all Rennline kill switches

Fits:
Porsche 911
Porsche 964
Porsche 993

This item is required by most organized race events. Remote pull kits allow corner worker to easily turn the power off on your car in the case of an emergency. This kit has a T-Handle end that can easily be installed through existing or drilled holes. Kit can also be mounted in dash for easy driver access. Kit Includes 6' red pull cable with handle, power/ off tag, cable end and full installation instructions. Can be used on several different battery disconnect switches.

Note: Pictures may not show actual product.

Rennline adjustable pedal lifter plate for Porsche



Fits:
Porsche 944 / 924 / 968
Porsche 996 / 997 / 991
Porsche 986 / 987 / 981 Boxster
Porsche 987 / 981 Cayman

Can't Heel/Toe? Need more height on your gas pedal? Rennline's adjustable lifter plate will solve the problem. This add on pedal accessory turns your standard Rennline gas pedal cover into a fully adjustable unit. This unique design installs in minutes and allows full height adjustment up to 1 inch. Not only does this lifter plate adjust the height but it also allows you to adjust the pedal angle in both lateral and longitude directions. This feature allows you to set the exact angle required to easily perform heel/toe maneuvers. Best of all, every adjustment is simply made from the 3 mounting screws on the face of the pedal.

Note: This is only the lifter plate assembly, Pedal cover and extensions are not included with this kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PA71

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set. Rubber Grip
LHD Cars

Fits:
Porsche 991

Porsche 991.2
Porsche 981 Boxster
Porsche 718 Boxster
Porsche 981 Cayman
Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7160101

The product you are viewing cross references to these numbers

Rubber Bonnet/Boot Hooks. LARGE (Set of 2).

It is the little touches that make a project, so whether you are doing a backdate, replica, restomod or tribute car you want the details to be correct. Complete the front of your car with these RSR Replica Rubber Bonnet Hooks; not only do they look the part but they shave complexity and weight just like the factory versions. A perfect complement for any build, these Bonnet Hooks will make sure when people see you coming they know you have paid attention to every facet of your build.

Front bumper wire mesh grill kit w/ 3rd radiator, Inner & Outer, w/o Parking Sensors.

Fits:
Porsche 981 Cayman / 981 Cayman S
without Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit w/ 3rd Radiator. Outer Grill Kit.

Fits:
Porsche 981 Cayman / 981 Cayman S
with Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Rennline REV4 4PC Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche Panamera Tiptronic/PDK cars

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Rubber Grip.
LHD Cars



Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 991 Manual cars only
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche Panamera Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic
•   Precision machined socket that accepts factory potentiometer arm (981/991/Panamera)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Perforated.
LHD Cars



Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Perforated.
LHD Cars



Fits:
Porsche 991 Manual cars only
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche Panamera Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 Fully Adjustable Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline Rear Tie Down

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) rear hooks.

Note: Also available with intergrated subframe support brace (Not included, but available separately).

Note: Pictures may not show actual product.

Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).

Fits:
Porsche 981 Boxster
Porsche 981 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 981 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs:
These hooks have been specifically engineered to bolt to the rear of your 981 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.