Rennline

Rennline Lower Dash Delete Cover.

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

A very popular modification on any 964/993 is the removal of that big, bulky knee pad assembly that consumes the lower dash area. The only problem with this weight saving alteration is that you will be left with exposed hardware and a very “unfinished” appearance to your dash. Rennline’s lower dash delete panel has been designed to solve all of the issues mentioned above. Simply bolt this unit in place of the factory knee pad and your done. Available in black textured powder coat to match existing factory dash components or bare aluminum that can be painted or wrapped in leather.

Note: Pictures may not show actual product.

Rennline Airbag Delete Cover. BLACK.

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Most, if not all track prepared 964/993 cars will have their air bags removed to save weight and to avoid being deployed if the inevitable were to happen. Factory air bag covers are very valuable, and should not be left in these cars to become victims of the less than gentle treatment that track cars receive. Rennline’s airbag delete panel is a lightweight aluminum panel that is formed to the exact shape and size of the factory padded air bag cover but weighs 2/3rds less. Available in textured black powder coat to match the existing factory dash and uses all factory air bag cover hardware.

Note: Airbag must be removed to use this product.

Note: Pictures may not show actual product.

Rennline Aluminium dash cluster (autometer guages).



Fits:
Porsche 914 1969-76

It’s time to modernise those dated gauges in your 914. This job is made easy with Rennline’s aluminium instrument cluster. This unit is made from billet aluminium and comes with a brushed finish that is easy to paint if desired. It will accept all modern size instruments as well as needed 1/2 inch wide warning lights that were originally integrated with your factory gauges. This cluster is shown with Autometer's play-back programmable tach, and electronic speedometer. Other types of modern gauges can be installed as well. VDO and Autometer sell an inexpensive device to convert a mechanical speedometer cable rotation in to a electronic impulse signal, thus allowing the use of an electronic speedometer. Old cluster has outdated size cut outs, and will not fit modern-size instruments.

Note: Pictures may not show actual product.

Rennline Aluminum lower dash cover



Fits:
Porsche 911/912/930 All 1985-89
Porsche 964 1989-95
Porsche 993 1995-98
FOR LHD (LEFT HAND DRIVE) CARS


This super lightweight dash cover has been specifically designed to finish off that stripped out dash of your 911 race car. This one piece unit covers the entire bottom half of the dash area from the top pad down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added during installation. All stainless steel hardware is included for an easy installation. Available in brushed or black powder coat finish.

Note: Dash padding, glove box and passenger side airbag must be removed for installation.

Note: Pictures may not show actual product.

Rennline Aluminum lower dash cover

Fits:
Porsche 911/912/930 All 1965-84
FOR LHD (LEFT HAND DRIVE) cars


This super lightweight dash cover has been specifically designed to finish off that stripped out dash of your 911 race car. This one piece unit covers the entire bottom half of the dash area from the top pad down. The dash panel comes with ignition and mounting holes only, custom holes can easily be added during installation. All stainless steel hardware is included for an easy installation. Available in brushed or black powder coat finish.

Note: Dash padding and glove box must be removed for installation.

Note: Pictures may not show actual product.

Rennline Stainless Steel Indicator light cover.

Fits:
Porsche 996 1998-05
Porsche 986 Boxster 1996-05

What part of your Porsche do you look at the most? If you drive it, then the answer is simple, the gauges. We're not sure what Porsche was thinking when they left that big black flat area below the gauges on the 996, but Rennline has the solution. Our stainless dash plate really dresses up any 996 dash and still allows all the indicator lights to be seen. This simple and easy to install element really defines that classic 5 individual gauge look that Porsche has been famous for since the first 911 was produced in 1964. This dash plate is made out of 300 series stainless steel and comes with a double sided adhesive already applied and ready for a 2 minute installation. Comes with a brushed finish but can easily be painted to suit your individual needs.


Note: Pictures may not show actual product.

Rennline Brake Caliper Adapter Kit for Boxster/993/993TT Calipers. FRONT

SET OF 2

Fits:
Porsche 964 1989-94
Porsche 944 S2
Porsche 968 1992-95

For 964/944's with medium S4 calipers: Use 304x32mm rotors Porsche part number 92835104360 / 92835104460
For 964/944's with 993TT (Big Red Calipers): Use 322x32mm rotors Porsche part number 96535104500 / 96535104600

Note: Pictures may not show actual product. The adaptor is intended for off road use only. 

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 997.2 GTS / GT3 2009-11
Porsche 997.2 C2 / C2S / C4 / C4S *** ONLY cars with Factory Aero Bumper 2009-2011

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time. Other colors available by special order, please contact us for details.

Pictures may not reflect actual application. Car's without center radiator cannot use center mesh without the oem center retaining frame from Tiptronic bumper.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 997 TURBO 2005-09
Porsche 997 TURBO 2010-13

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.



Fits:
Porsche 997 C2 / 997 C2S 2005-2008
Porsche 997 C4 / 997 C4S 2005-2008

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time. Other colors available by special order, please contact us for details.

Pictures may not reflect actual application. Manual Cars without center radiator cannot use center mesh without the oem center retaining frame from Tiptronic bumper.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 997 GT3 / 997 GT3 RS 2005-2009
Porsche 997 C2 / C2S / C4 / C4S *** ONLY cars with Factory Aero Bumper

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time. Other colors available by special order, please contact us for details.

Pictures may not reflect actual application. Manual Cars without center radiator cannot use center mesh without the oem center retaining frame from Tiptronic bumper.

Front Bumper Wire Mesh Grill Kit. 5
5 meshes in this kit for SportDesign bumper.

Fits:
Porsche 991/991S with Sport Design bumper WITH parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996 GT2

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time. Other colors available by special order, please contact us for details.

Pictures may not reflect actual application

Rennline Front bumper wire mesh grill kit (Outers). Black
2 piece set - mesh for left and right grill only

Fits:
Porsche 991/991S C2 / C2S (NOT TARGA)
*cars WITHOUT parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996.1 1999-2001

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996.2 2002-2005
Porsche 996.2 GT3

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.