Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://d911api.datadial.net/images/schemaLogo.png https://d911api.datadial.net/images/schemaLogo.png +443456003478 https://d911api.datadial.net Facebook Instagram

Retro Trim

About Retro Trim

Retro Trim for Porsche

Retro Trim parts for Porsche models from Design911, focused on tightening up tired interiors, reducing rattles, and restoring a clean, factory-style finish to the cabin

A Quick Look at Retro Trim

Retro Trim information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where Retro Trim is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

  • Typical reasons to choose these parts include refreshing worn coverings, tightening up loose trims, and improving day-to-day comfort and presentation in the cabin.
  • Common issues they address include peeling or faded finishes, sagging liners, rattles, cracked plastics, worn adhesives, and misaligned panels, often made worse by age or previous interior work.
  • Before fitting, lay parts out and compare to your existing trim to confirm fixings and clips, and replace old clips or felt pads where possible to avoid new squeaks and rattles.
  • Always check interior colour codes and reference photos in the listing, as Porsche interior shades and textures can vary even within the same model line.
  • Take your time with DIY trim work, using plastic trim tools and cleaning bonding surfaces thoroughly so adhesives and fasteners perform as intended.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Interior & Accessories — Interior & accessories parts from Retro Trim are typically used when refreshing worn touch points, fixing broken trim, or adding small usability upgrades such as storage or comfort enhancements, where listed for Porsche.

  • Use correct trim tools and replace missing clips as you go to avoid introducing new rattles.
  • Check for model-year differences in fixings and finishes before stripping old parts.

Gauge Bezels — Gauge bezel components from Retro Trim are usually chosen during instrument cluster tidy-ups or restorations to replace scratched, pitted, or faded rings and sharpen the look of the Porsche dashboard where applicable.

  • Work in a clean area and avoid forcing clips so dust and marks are not trapped inside the gauges.
  • Minor marks can sometimes be polished, but badly pitted or peeling finishes generally need replacement.

Alloy/ Silver Interior — Alloy and silver interior trim from Retro Trim is aimed at refreshing scratched or worn metallic-look pieces and restoring a cohesive, factory-style appearance across high-touch areas of the Porsche cabin.

  • Match finish type (brushed, satin, bright) carefully so new parts blend with the rest of the interior.
  • Consider renewing clips and adding felt tape on contact points to minimise squeaks and creaks.

Mats & Carpets — Retro Trim mats and carpets, where offered for Porsche, help protect original flooring, tidy up stained or worn areas, and improve underfoot comfort while contributing to a fresher overall cabin feel.

  • If carpets or underlay are damp, trace and fix leaks (such as door seals or drains) before fitting new mats.
  • Use the correct fixing clips or grommets to prevent mats from sliding under the pedals.

Floor Mats RHD CARS — Right-hand drive floor mats from Retro Trim are selected to achieve a better fit around RHD pedal layouts, improve safety by reducing mat movement, and smarten the interior in UK and other RHD Porsche markets.

  • Choose mats specifically listed for RHD Porsche models so heel pads and cut-outs align correctly.
  • Inspect and replace worn heel pads and broken fixings early, as these are common wear points.

Explore Retro Trim at Design911

View the current Retro Trim range for Porsche at Design911, then filter by model and category to narrow down to the right parts.

DISPLAYING 1 to 16 (of 236 products)
1 2 3 4 >>
96455205601/1
Product Information
Product Information

Porsche 964 Right Hand Drive (RHD) Dashboard – Handmade Black Leather

This premium dashboard is designed for Right Hand Drive Porsche 964 models and is expertly handmade and covered with high quality black leather. Built to deliver an authentic appearance and superior craftsmanship, it is an ideal replacement for ageing or damaged original dashboards.

Fits:

  • Porsche 964 (911) C2 1989-93
  • Porsche 964 (911) C4 1989-93
  • Porsche 964 (911) RS 3.6L 1991-93
  • Porsche 964 (911) RS 3.8L 1991-93
  • Porsche 964 (911) TURBO 3.3L 1991-93
  • Porsche 964 (911) TURBO 3.6L 1991-93

The Porsche 964 interior is known for its classic driver-focused layout, but over time the dashboard is one of the most common components to deteriorate due to sunlight, heat and material ageing. Replacing a worn dashboard restores the interior appearance and preserves the value of the vehicle.

What This Dashboard Does

The dashboard forms the central structure of the vehicle interior and houses key components such as the instrument cluster, ventilation outlets and control panels. It also defines the visual quality and overall presentation of the cabin.

A high quality dashboard helps:

• Restore the original appearance of the Porsche 964 interior
• Provide proper mounting for instruments and interior components
• Improve the overall finish of restoration projects
• Enhance the driving experience with a premium interior look

Why Porsche 964 Dashboards Fail

Original dashboards in the Porsche 964 often suffer from deterioration due to age and environmental exposure.

Common issues include:

Sun damage and cracking
Constant exposure to UV light can cause the original material to crack or warp.

Material shrinkage
Ageing interior materials may shrink over time, leading to poor fitment and visible gaps.

Surface fading
Years of sunlight and heat can cause discolouration or uneven surfaces.

Previous repairs or coverings
Many older dashboards have been poorly repaired or covered with aftermarket materials that reduce interior quality.

Replacing the dashboard restores the original appearance and ensures a properly fitted interior component.

Why Choose This Handmade Leather Dashboard

Handcrafted Construction
Each dashboard is handmade and individually covered with leather by skilled craftsmen, ensuring a high level of attention to detail.

Premium Black Leather Finish
The black leather covering provides a refined, classic appearance that matches the original Porsche interior styling.

Excellent Fit and Quality
Designed for precise fitment within the Porsche 964 dashboard frame, ensuring proper alignment with vents, instruments and trim components.

Ideal for Restoration and Interior Upgrades
Perfect for owners restoring classic Porsche 964 models or upgrading the interior finish to a higher standard.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96455205601
96455205601
96455205601KZ2

The product you are viewing cross references to these numbers
91152107200/2
Product Information
Product Information
This black vinyl two-piece front seat set with Pepita (houndstooth) centre insert is a period-correct replacement designed for Porsche 911 models from 1974 to 1984  with standard seats. Supplied for one front seat, it recreates the iconic factory-style interior combination used in classic G-Series 911 models. Set includes one backrest and one seat pad cover.

Fits: 
Porsche 911 G type  1974 - 1984 
 * with standard seats

This seat cover is manufactured using durable automotive-grade black vinyl bolsters combined with a classic black and white Pepita (houndstooth) fabric centre panel. The horizontal stitched pleats and pattern layout closely replicate the original Porsche interior styling from the mid-1970s through early 1980s.

Pepita was one of Porsche’s most distinctive heritage fabrics, offering a sporty and elegant appearance that perfectly complements the G-Series interior aesthetic.

Designed as a direct-fit replacement, this cover restores the original look of your seat while maintaining durability and everyday usability.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.
91152107200/1
Product Information
Product Information
This black vinyl two-piece front seat set is a high-quality replacement trim designed for Porsche 911 models from 1974 to 1984  with standard seats. Featuring a perforated centre panel, it replicates the original factory-style appearance used in classic G-Series 911 interiors. Supplied for one front seat, it is ideal for restoration projects or replacing worn upholstery. Set includes one backrest and one seat pad cover.

Fits: 
Porsche 911 G type  1974 - 1984 
 * with standard seats

This seat cover is manufactured from durable automotive-grade black vinyl with a perforated centre insert and horizontal stitched pleats, closely matching the original Porsche design from the mid-1970s to early-1980s 911 models. It restores the authentic look and feel of the classic interior while offering modern durability. The perforated centre panel improves visual authenticity and enhances breathability, while the smooth vinyl bolsters maintain the distinctive period-correct styling of the era.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.
90155507522/1
Product Information
Product Information
Rear Backwall Panel / Parcelshelf
Restore the classic interior of your early Porsche 911 with this Retro Line rear parcel shelf finished in black vinyl. Designed specifically to match the original interior specifications of 1965–1971 Porsche 911 Coupes, this parcel shelf combines authentic period styling with durable materials for a perfectly integrated look and long-lasting performance.

Fits:
Porsche 911 / 912 1965 - 1971 Coupe

This rear parcel shelf neatly finishes the area behind the seats, concealing the body structure for a clean, factory-correct appearance. It also helps reduce rear cabin noise, adding comfort and refinement to the interior.

Key Features & Benefits:
•  Original-style fit and finish for early Porsche 911
•   High-quality black vinyl upholstery
•   Durable and long-lasting construction
•   Tailored to the 911’s cabin contours for a precise fit
•   Enhances period-correct interior restoration

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507522
90155507522

The product you are viewing cross references to these numbers
9145550010
Product Information
Product Information

These “door panel pockets” (often called map pockets or door storage pockets) are the molded receptacles that mount into the interior door panels of a Porsche 914 (1970–1976) to hold small items like maps, gloves, etc. The set of 2 covers both left and right doors (driver and passenger)

Set of 2 The large door pocket fits on the left side of the car and the smaller door pocket fits of the right side of the car. 

These pockets are no longer available, so RetroTrim have replicated the original design. 

Fits:
Porsche 914



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9145550010
91455504409
91455504410
91455513810
91455502109
91455502110
91455502111

The product you are viewing cross references to these numbers
918FOAMALC
Product Information
Product Information
Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
 Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC
9GT881303BY

The product you are viewing cross references to these numbers
918FOAMALC
Product Information
Product Information
Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
 Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC
9GT881303BY

The product you are viewing cross references to these numbers
918FOAMALC
Product Information
Product Information
Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
 Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC
9GT881303BY

The product you are viewing cross references to these numbers
918FOAMALC
Product Information
Product Information
Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
 Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC
9GT881303BY

The product you are viewing cross references to these numbers
918FOAMALC
Product Information
Product Information
Seat cover and standard foam set in alcantara for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Transform your Porsche’s interior with our premium Weissach / RS-style seat cushions, upholstered in rich Alcantara for an ultra-luxurious, sporty feel. Designed to complement carbon bucket seats or OEM RS trims, these cushions enhance comfort while maintaining the high-performance aesthetic. These cushions are engineered to slip over your existing seat base or integrate with RS/Weissach carbon or lightweight seats. Their tailored design fits snugly, adding grip and reducing slippage under spirited driving

Premium Material: Covered in high-quality Alcantara for a soft, grippy, and durable surface
• Weissach / RS Styling: Authentic styling cues to match factory “RS / Weissach” interiors
• Comfort & Support: Adds padding and ergonomic support for longer drives
 Tailored Fit: Contoured for specific seat shapes to keep a flush, factory look

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMALC
9GT881303BY

The product you are viewing cross references to these numbers
918FOAMCVR
Product Information
Product Information
Seat cover and standard foam set for Porsche 918 fixed carbon bucket seats.
SET OF 4 (two backrests and two seat bases)

If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.
The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918FOAMCVR
9GT881303BY

The product you are viewing cross references to these numbers
90155507542/1
Product Information
Product Information
Finisher trim panel rear parcel shelf -  untrimmed. 

Fits:
Porsche 911 - 1972 to 1973

Diagram ref no 7 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507542
91155507541
91155507542

The product you are viewing cross references to these numbers
90155509640/1
Product Information
Product Information
Finisher trim panel rear parcel shelf -  untrimmed. 

Fits:
Porsche 911 / 912 targa - 1969 to 1971

Diagram ref no 7 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509640
90155509640

The product you are viewing cross references to these numbers
99355205500/1
Product Information
Product Information
Dashboard main section - Left Hand Drive (LHD)

Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Main dashboard section with the air vent hole (for Porsche 964 and 993) is now available in imitation leather with soft touch feel.
It not only offers a stylish design, but also an improved feel with the soft touch material. This upgrade adds a touch of luxury and comfort to your Porsche 964 or 993.
The large air vent hole provides efficient air circulation inside the car, which is especially important while driving. The faux leather gives the dashboard a premium look and durability, while the soft touch effect provides a pleasant tactile experience.

With this dashboard upgrade, you can enhance the interior of your Porsche 964 or 993 while benefiting from its practical advantages. 

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99355205500
96455205500
99355205500
9935520550005T
993552055009WH
993552055003HP
993552055006PN
964552055007AE
9645520550005T
964552055001MX
9645520550031KX
964552055009WH
964552055007YG
964552055009YF

The product you are viewing cross references to these numbers
CBPKT
Product Information
Product Information
Phone pocket on door inner card. 

retrotrim

Fits:
Porsche 911 - 1974 to 1989

Phone Pocket

Struggling to find the perfect spot for your phone? Tired of messy USB cables and constantly unplugging lighter chargers? Our Phone Pocket not only provides an ergonomic storage solution for your phone but also wirelessly charges it with no visible wires.

Installation:

The Phone Pocket is easily installed on the door cards and includes a hidden inductive charger placed in an empty door space. The charger connects to the power window harness, or if your car lacks power windows, it can be wired to the ignition switch. 

Fitment:

This pocket is designed to fit devices like the latest iPhone 12 Pro Max, even with basic bumpers. It is crafted to seamlessly integrate with our R-door cards and OEM door cards, but it can also be adapted for other classic cars.

Dimensions:

  • Depth: 12 cm
  • Width: 8.5 cm
  • Thickness: 2 cm
CBPKT
Product Information
Product Information
Phone pocket on door inner card. 

retrotrim

Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997


Phone Pocket

Struggling to find the perfect spot for your phone? Tired of messy USB cables and constantly unplugging lighter chargers? Our Phone Pocket not only provides an ergonomic storage solution for your phone but also wirelessly charges it with no visible wires.

Installation:

The Phone Pocket is easily installed on the door cards and includes a hidden inductive charger placed in an empty door space. The charger connects to the power window harness, or if your car lacks power windows, it can be wired to the ignition switch. 

Fitment:

This pocket is designed to fit devices like the latest iPhone 12 Pro Max, even with basic bumpers. It is crafted to seamlessly integrate with our R-door cards and OEM door cards, but it can also be adapted for other classic cars.

Dimensions:

  • Depth: 12 cm
  • Width: 8.5 cm
  • Thickness: 2 cm
DISPLAYING 1 to 16 (of 236 products)
1 2 3 4 >>