SHW Performance

REAR Brake Pads and Brake Disc Package. Porsche Panamera 3.0L Diesel / 4S
With Brembo brake pads

Porsche Panamera 3.0L Diesel (REAR)
Porsche Panamera 4S (REAR)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT970D.R.SHW

The product you are viewing cross references to these numbers

FRONT Brake Pads and Brake Disc Package Porsche 997 C4S

Porsche 997 C4 S 3.8L (FRONT)

This package includes Original Equipment Quality (OEQ) parts

For more information about OEQ Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT997C4S.F.SHW

The product you are viewing cross references to these numbers

FRONT Brake Pads and Brake Disc Package Porsche 997 3.8L C2S by SHW




Porsche 997 S C2 MKII 3.8L (FRONT)

This package includes Original Equipment Quality (OEQ) parts

For more information about OEQ Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT997C2S.2.F.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package. Porsche 996 GT3 2003>>




Porsche 996 GT3 (REAR)


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996GT3.R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package Porsche 991.2




Porsche 991.2 C2 (REAR)
Porsche 991.2 C4 (REAR)
Porsche 991.2 C2S (REAR)
Porsche 991.2 C4S (REAR)
Porsche 991.2 C2S GTS **(REAR)
Porsche 991.2 C4S GTS **(REAR)
**cars without centre locking wheels

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT991.2.R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package Porsche 997 3.6L C4




Porsche 997 C4 MKII 3.6L (REAR)

This package includes Original Equipment Quality (OEQ) parts

Standard Replacement

For more information about OEQ Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT997C4.2.R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package Porsche 991 S 3.8L

 

Porsche 991 3.8L C2S (REAR)
Porsche 991 3.8L C4S (REAR)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT991S.1R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package Porsche 997 Carrera 2S

  


Porsche 997 Carrera 2S 3.8L (REAR)

This package includes Original Equipment Quality (OEQ) parts

Standard Replacement

For more information about OEQ Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT997C2S.R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package for Porsche 996C4S / 996 Turbo

  


Porsche 996 C4S
Porsche 996 Turbo 2000>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.R.SHW

The product you are viewing cross references to these numbers

FRONT Brake Pads and Brake Disc Package for Porsche 996C4S / 996 Turbo




Porsche 996 C4S
Porsche 996 Turbo 2000>>


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.F.SHW

The product you are viewing cross references to these numbers

Brake disc rotor 380x30mm inc brake pads & sensors Porsche 992.1 Carrera GTS / Turbo

Brake Disc Ø:  380mm
Brake Disc Thickness: 30 mm,
Brake Disc Type: internally vented, two-part brake disc, Drilled


For Option Codes: 2EB / 2ET
Porsche 992.1 Carrera GTS
Porsche 992.1 Carrera 4 GTS
Porsche 992.1 Turbo

SHW PERFORMANCE, one of the world's leading brake disc manufacturers supplying directly to OEM, with product featured as standard equipment on many of today's new performance vehicles. 

THE ONLY TRUE REPLACEMENT.
NOTHING LESS THAN A TRUE FACTORY EQUIVALENT

SHW PERFORMANCE produces both one and two piece, ventilated disc brake rotors to cover a wide range of vehicle applications.​The vehicle application automatically dictates which style, composition and type of disc brake rotor is available, as SHW only offer a genuine direct replacement for the factory supplied disc.​For lesser performance orientated vehicles, a ventilated monoblock disc brake rotor produced from cast iron will more than suffice. For vehicles placing greater demand on the needed stopping power, a lightweight, composite, fully floating two-piece design is often preferred (the style of which is referred commonly as a peg or pin drive system). 

PERFORMANCE UNDER PRESSURE.
CONSISTENT RELIABILITY AND PERFORMANCE UNDER THE MOST DEMANDING OF CONDITIONS

Quality is a key ingredient from which to guarantee long term repeated reliability. SHW products are built to carry the high expectations required by exacting OEM standards and exceed them where possible.

PATENTED DESIGN PIN-DRIVE SYSTEM.
FROM WEIGHT REDUCTION TO IMPROVED COOLING, DISCOVER THE BENEFITS OF THE SHW PIN-DRIVE BRAKE ROTOR SYSTEM

Innovation, sustainability, added value. Welcome to SHW's patented Pin-Drive system, a substantial step forward in the future of braking.​

SHW's Pin-Drive system carries many benefits when compared to conventional methods of disc brake rotor design. So, what is 'Pin-Drive' and why is it advantageous over a one-piece disc brake rotor?

​The Pin-Drive system is a two piece fully floating disc brake rotor. The friction ring is connected to the central aluminium rotor bell by means of stainless steel pins which are cast into the assembly during the manufacturing process. The purpose behind the design is to offer a range of advantages:​

 - Up to 5.5lbs of weight reduction (rotating and unsprung weight) per disc compared to Monoblock.
 - Reduced thermal strain thanks to the friction ring having more freedom to expand and contract.
 - Low brake fading properties.
 - Improved durability.
 - Enhanced brake comfort thanks to optimised thermal conditions.
 - Optimal curved vane design that maintains structural strength while improving noise dampening. 

UNPARALLELED COOLING ADVANTAGES.
MAINTAIN OPTIMUM BRAKING PERFORMANCE FOR LONGER WITH IMPROVED COOLING PROPERTIES.

As well as a reduction in unsprung weight and improved braking characteristics, SHW's Pin-Drive design also prides itself on offering unbeatable cooling advantages, just one of the reasons why it has become the first choice for many OEM's.

Unlike other brake manufacturers, SHW developed a PATENTED improvement of the disc construction by offsetting the pin connection of the friction ring to the aluminium disc bell away from the center to the edge, which results in huge cooling gains.

By offsetting the pin connection of the friction ring to the aluminium bell the cooling channels running centrally through the rotor see a huge increase in accessibility and cooler air flow. This advantageous design offers up to a 50% cooling advantage gain when compared to traditional designs.

Allowing a greater flow of air, heat generated on the surface of the friction ring (via the brake pads clamping down under braking) is carried away faster and more efficiently, dramatically reducing inner core and surface temperatures across the complete disc brake rotor. In addition, due to the unique patented design, further weight savings are achieved thanks to a shallow aluminium disc bell.

THE IMPORTANCE OF AIR FLOW. WHEN AIR FLOW IS PARAMOUNT TO PERFORMANCE. THE LOWER THE OPERATING TEMPERATURES, THE HIGHER THE PERFORMANCE. The cold air is traditionally fed via air ducts located either in the front bumper, or channeled through pathways on the underside of the vehicles under tray. As the cold air enters the rear of the disc bell, it passes through vanes between the two brake rotor faces. The cooler air helps to reduce temperatures from the very core of the brake disc by collecting heat and carrying it outwards, away from the brake disc assembly and eventually venting back out into the passing air flow found circulating the inner wheel. 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT992TT.F.SHW

The product you are viewing cross references to these numbers

FRONT Brake Pads and Brake Disc Package. Porsche Cayenne S Coupe 9YA Disc size 390mm X 38mm
SHW brake disc with Brembo brake pads 

Porsche Cayenne S Coupe 9YA - FRONT

Brake disc diameter 390mm X 38mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT9YAS.F.SH

The product you are viewing cross references to these numbers

SHW Performance Front smooth 2-part Light Weight brake disc rotors with Textar brake pads.  This brake kits fits Cayenne Turbo and Turbo S models with PR Code 1LH (Red Brake Calipers).

Brake Dis  Diameter Ø: 380 mm
Brake Disc Thickness: 38,0 mm
Brake Disc Type: internally vented, two-part brake disc, Smooth 


Porsche Cayenne (955) TURBO S 4.5L MKI FRONT
Porsche Cayenne (957) TURBO 4.8L MKII FRONT
Porsche Cayenne (957) TURBO S 4.8L MKII FRONT
*For cars with 482mm/19" Wheels and RED callipers
*option code: I1LH


SHW PERFORMANCE, one of the world's leading brake disc manufacturers supplying directly to OEM, with product featured as standard equipment on many of today's new performance vehicles. 

THE ONLY TRUE REPLACEMENT.
NOTHING LESS THAN A TRUE FACTORY EQUIVALENT

SHW PERFORMANCE produces both one and two piece, ventilated disc brake rotors to cover a wide range of vehicle applications.​The vehicle application automatically dictates which style, composition and type of disc brake rotor is available, as SHW only offer a genuine direct replacement for the factory supplied disc.​For lesser performance orientated vehicles, a ventilated monoblock disc brake rotor produced from cast iron will more than suffice. For vehicles placing greater demand on the needed stopping power, a lightweight, composite, fully floating two-piece design is often preferred (the style of which is referred commonly as a peg or pin drive system). 

PERFORMANCE UNDER PRESSURE.
CONSISTENT RELIABILITY AND PERFORMANCE UNDER THE MOST DEMANDING OF CONDITIONS

Quality is a key ingredient from which to guarantee long term repeated reliability. SHW products are built to carry the high expectations required by exacting OEM standards and exceed them where possible.

PATENTED DESIGN PIN-DRIVE SYSTEM.
FROM WEIGHT REDUCTION TO IMPROVED COOLING, DISCOVER THE BENEFITS OF THE SHW PIN-DRIVE BRAKE ROTOR SYSTEM

Innovation, sustainability, added value. Welcome to SHW's patented Pin-Drive system, a substantial step forward in the future of braking.​

SHW's Pin-Drive system carries many benefits when compared to conventional methods of disc brake rotor design. So, what is 'Pin-Drive' and why is it advantageous over a one-piece disc brake rotor?

​The Pin-Drive system is a two piece fully floating disc brake rotor. The friction ring is connected to the central aluminium rotor bell by means of stainless steel pins which are cast into the assembly during the manufacturing process. The purpose behind the design is to offer a range of advantages:​

 - Up to 5.5lbs of weight reduction (rotating and unsprung weight) per disc compared to Monoblock.
 - Reduced thermal strain thanks to the friction ring having more freedom to expand and contract.
 - Low brake fading properties.
 - Improved durability.
 - Enhanced brake comfort thanks to optimised thermal conditions.
 - Optimal curved vane design that maintains structural strength while improving noise dampening. 

UNPARALLELED COOLING ADVANTAGES.
MAINTAIN OPTIMUM BRAKING PERFORMANCE FOR LONGER WITH IMPROVED COOLING PROPERTIES.

As well as a reduction in unsprung weight and improved braking characteristics, SHW's Pin-Drive design also prides itself on offering unbeatable cooling advantages, just one of the reasons why it has become the first choice for many OEM's.

Unlike other brake manufacturers, SHW developed a PATENTED improvement of the disc construction by offsetting the pin connection of the friction ring to the aluminium disc bell away from the center to the edge, which results in huge cooling gains.

By offsetting the pin connection of the friction ring to the aluminium bell the cooling channels running centrally through the rotor see a huge increase in accessibility and cooler air flow. This advantageous design offers up to a 50% cooling advantage gain when compared to traditional designs.

Allowing a greater flow of air, heat generated on the surface of the friction ring (via the brake pads clamping down under braking) is carried away faster and more efficiently, dramatically reducing inner core and surface temperatures across the complete disc brake rotor. In addition, due to the unique patented design, further weight savings are achieved thanks to a shallow aluminium disc bell.

THE IMPORTANCE OF AIR FLOW.
WHEN AIR FLOW IS PARAMOUNT TO PERFORMANCE. THE LOWER THE OPERATING TEMPERATURES, THE HIGHER THE PERFORMANCE.

The cold air is traditionally fed via air ducts located either in the front bumper, or channeled through pathways on the underside of the vehicles under tray. As the cold air enters the rear of the disc bell, it passes through vanes between the two brake rotor faces. The cooler air helps to reduce temperatures from the very core of the brake disc by collecting heat and carrying it outwards, away from the brake disc assembly and eventually venting back out into the passing air flow found circulating the inner wheel. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT957TS.F.SHW

The product you are viewing cross references to these numbers