Geben Sie hier Ihre MwSt.-Nummer ein und klicken Sie auf Überprüfen:
Sie brauchen den Ländercode Ihrer MwSt.-Nummer nicht einzugeben, da dieser bereits oben in Ihrer Rechnungsadresse ausgewählt wurde.
Ihre Angaben wurden überprüft. MwSt.-Nummer registriert auf:
,
.
Ihre Bestellung ist nun mehrwertsteuerfrei. Wir behalten uns das Recht vor, diese Angaben nach Ihrer Bestellung zu überprüfen und gegebenenfalls die Mehrwertsteuer wieder einzuführen.
Ihre MwSt.-Angaben wurden nicht erkannt oder waren ungültig. Ihre MwSt.-Nummer muss mit Ihrem Rechnungsland übereinstimmen, wie oben angegeben. Dies ist derzeit als angegeben. Sie brauchen den Ländercode Ihrer MwSt.-Nummer nicht einzugeben, da Sie diesen bereits in den Angaben zu Ihrer Rechnungsadresse oben ausgewählt haben.
Der Dienst zur Überprüfung von MwSt.-Nummern ist derzeit offline. Bitte geben Sie Ihre MwSt.-Daten im Feld „Kommentare“ oder „Besondere Hinweise“ unten an, und wir werden nach Ihrer Bestellung einen MwSt.-Rabatt gewähren.
Maxilite
Maxilite for Porsche
Maxilite parts for Porsche models from Design911, focusing on classic-style wheels with modern manufacturing for road and enthusiast use.
A Quick Look at Maxilite
Maxilite information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Maxilite is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose these wheels include replacing damaged original Porsche wheels, achieving a classic appearance on restorations or backdate builds, and improving everyday usability while keeping a period-correct look.
- Common wheel issues include kerb damage, lacquer peel, corrosion, slow air leaks, and vibration from poor balancing or incorrect hub fit. Fitment problems often relate to offset, tyre sizing, or the wrong bolt seat type.
- For practical checks, confirm centre bore, offset (ET), and brake/arch clearance before purchase, and consider whether different bolts or nuts are required if you use spacers or change wheel design.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Wheels — Wheels are typically replaced to repair damage, refresh corroded or kerbed finishes, change styling, or adjust weight and fitment for tyres and suspension. Where listed for Porsche, they can help achieve the right stance, improve brake clearance, or restore a factory-style look while maintaining safe offset and clearance.
- Investigate vibrations or steering shake promptly; often linked to wheel balance issues or a buckled rim.
- Always confirm wheel width, offset (ET), and brake/arch clearance before buying or fitting.
Fuchs Wheels 15" Matt Ultralite — This category focuses on 15-inch matt ultralite Fuchs-style wheels, chosen to reduce unsprung weight and sharpen steering response while keeping a classic Porsche appearance. They are often used where owners want a lighter-feeling drive without an overly showy finish.
- Lighter wheels can improve steering and suspension response but should be checked carefully for bends or cracks after heavy impacts or potholes.
- Maintaining correct tyre pressures helps reduce impact damage risk and protects rim edges.
Fuchs Wheels 15" Chrome Ultralite — These 15-inch chrome or bright-finish ultralite Fuchs-style wheels are selected primarily for standout aesthetics on classic or show-focused Porsche builds. They aim to combine the traditional design with a high-impact visual finish where compatibility is confirmed.
- Chrome and bright finishes need careful cleaning; once the coating is damaged, pitting and corrosion can spread, especially in winter conditions.
- Rinse off road salt promptly and avoid aggressive cleaners to prolong the life of the finish.
Fuchs Wheels 15" RSR Ultralite — This category covers 15-inch RSR-style ultralite wheels, typically chosen to echo classic Porsche motorsport looks while targeting improved performance through reduced weight and focused design. They are popular where a more purposeful, track-inspired appearance is desired and the widths/offsets suit the chassis.
- Incorrect width or offset can cause rubbing, vibration, or poor handling, so always compare the wheel specs with your current setup.
- Check brake and arch clearance at full steering lock and full suspension compression after fitting.
Fuchs Wheels 16" Matt Ultralite — These 16-inch matt ultralite Fuchs-style wheels are used where owners want a classic look with a slightly larger diameter and reduced unsprung weight. They are intended to enhance steering feel and suspension reaction while keeping a subtle, road-friendly finish where fitment is correct.
- If vibration appears after pothole strikes, inspect wheels for buckles or cracks and tyres for bulges.
- Keeping tyre pressures within the recommended range and avoiding kerb impacts helps preserve both ride quality and wheel condition.
Explore Maxilite at Design911
View the current Maxilite range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Schwarzes, mattes Finish mit diamantgeschliffenem Rand.
Größe: 11 x 15, Versatz ET-27, PCD 5 x 130, Gewicht 9,0 kg
Mit TÜV-Gutachten.
Empfehlen Sie Reifen, die Sie auf 11-Zoll-Rädern verwenden können:
285/40/15
295/40/15
335/35/15
passt ohne Umbau auf die Hinterachse des Porsche 911 mit Turbo- und RSR-Heckbögen sowie alle Breitbaufahrzeuge mit Turbo-Heckbögen
Der Preis gilt für JEDE Felge
Passt:
Beim Kauf eines „Rad-Reifen-Pakets“ montieren und wuchten wir die Räder kostenlos.
*Radkappen sind in diesem Preis nicht enthalten.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Schwarzes, mattes Finish mit diamantgeschliffenem Rand. TIEFER 6 BLICK
Porsche Fuchs Design Rad in 6x15, ET 36, 5x130, Optik wie Original Deep Six, mattschwarzer Kern mit diamantgeschliffener Lippe, neu, nie verbaut, passend für Porsche 911 und 912 bis MJ 1976 rundum, auch Vorderachse von Porsche 911 bis MJ 1980, nicht SC 204 PS, Carrera 3,2 oder Turbo.
Größe: 6,0 x 15, Kröpfung ET36, Lochkreis 5 x 130, Gewicht 6,1 kg
Mit TÜV-Gutachten.
Reifengröße empfehlen: 185/70/15
Passt:
Porsche 912 / 911 bis 1976 Front & Heck
Porsche 911 bis 1980 Front (nicht 911SC 204PS oder Carrera 3.2l oder 930 Turbo)
Der Preis gilt für JEDE Felge
Beim Kauf eines „Rad-Reifen-Pakets“ montieren und wuchten wir die Räder kostenlos.
*Radkappen sind in diesem Preis nicht enthalten.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Schwarzes, mattes Finish mit diamantgeschliffenem Rand.
Größe: 8,0 x 15, Offset ET10,6, PCD 5 x 130, Gewicht 7,4 kg. Mit TÜV-Zertifikat.
Reifengröße empfehlen: 225/50/15
passend für die Hinterachse von Porsche 911 Carrera 2.7L /3.0L / 3.2L und 3.0SC, leichte Modifikationen an der hinteren Radlauflippe können erforderlich sein, Passt auch für 930 (911 Turbo) 1975 bis 1989 und alle Breitbaufahrzeuge mit Turbo-Heckbögen (Turbo-Look, 3.0 RS, SC-RS etc.) ohne jegliche Modifikationen
Der Preis gilt für JEDE Felge
Passt:
Beim Kauf eines „Rad-Reifen-Pakets“ montieren und wuchten wir die Räder kostenlos.
*Radkappen sind in diesem Preis nicht enthalten.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Vollständig poliertes Finish
Größe: 9,0 x 15, Kröpfung ET15, Lochkreis 5 x 130, Gewicht 7,7 kg
Mit TÜV-Gutachten.
Reifengröße empfehlen: 225/60/15
passend für die Hinterachse von Porsche 911 Carrera 2.7L /3.0L / 3.2L und 3.0SC, leichte Modifikationen an der hinteren Radlauflippe können erforderlich sein, Passt auch für 930 (911 Turbo) 1975 bis 1989 und alle Breitbaufahrzeuge mit Turbo-Heckbögen (Turbo-Look, 3.0 RS, SC-RS etc.) ohne jegliche Modifikationen
Der Preis gilt für JEDE Felge
Passt:
Beim Kauf eines „Rad-Reifen-Pakets“ montieren und wuchten wir die Räder kostenlos.
*Radkappen sind in diesem Preis nicht enthalten.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)