Heat exchanger fitting kit. Porsche 964  ❭  MANIFOLDKIT964

Akrapovic Evolution header set (Titanium)

Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020

Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.


Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.

When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E-PO

The product you are viewing cross references to these numbers

Screw plug for lambda hole, M18x1.5 mm.



Fits:
Porsche 924S 2.5L 1987-88 (Engine M44.09/M44.10)
Porsche 944 2.5L 1987-90 (Engine M44.09/M44.10)
Porsche 944 Turbo 2.5L 1985-91
Porsche 944S 2.5L 1986-88 (Engine M44.40)
Porsche 944 2.7L 1988-89
Porsche 944 3.0L 1988-91
Porsche 996 GT3 3.6L 1999-05
Porsche 968 3.0L 1991-95
Porsche 986 Boxster 2.5L 1996-99 (Engine M96.20)
Porsche 986 Boxster S 2.7L-3.2L 1999-04
Porsche 993 3.6L-3.8L 1993-97
Porsche 997 3.6L 2004-08 (Engine M95.05)
Porsche 997 3.8L 2004-08 (Engine M97.01)

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90021901500

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-TI-18

The product you are viewing cross references to these numbers