Front Brake Pad And Brake Disc Package. Porsche 992.1 C2 / C4 2019-24

Fits:

• Porsche 992.1 Carrera 2 3.0L 2019-24
• Porsche 992.1 Carrera 4 3.0L 2019-24
• Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 3.0L 2020-24

• Brake Pads: The pads are the friction-material blocks that the brake calipers press against the discs (rotors) when you apply the brakes. Good quality pads ensure strong, predictable braking force, proper heat handling, minimal fade, low noise, and safe stopping distances. Over time, they wear down and must be replaced to maintain performance.
• Brake Discs / Rotors: The front discs provide the surface against which the brake pads clamp. They convert the kinetic energy of the moving car into heat via friction. The rotors must maintain flatness, correct thickness, no warping or cracking, and correct dimensions (e.g., diameter, thickness, venting/helical design) for optimum braking performance.
• Pad Wear Sensor / Accessory: This wear sensor monitors pad thickness and signals the driver when the pad material is low, providing a safety warning. Using the correct sensor ensures the braking wear system works properly.

• Brake Pads: Signs that the pads need replacement: reduced braking performance, longer stopping distances, brake squeal or screech (wear indicators contacting the rotor), visible wear of pad material (thickness nearly gone), vibration or pulsing under braking (could indicate rotor or pad issue). If you’re replacing discs anyway, doing pads at the same time is a smart practice.
  
• Brake Discs: You should inspect for warping (causes vibration or judder through the pedal), surface cracking (especially under heavy use), thickness below the minimum spec, excessive lateral run-out, corrosion or groove wear. If any of these symptoms show, replacement is recommended. Replacing discs and pads together ensures optimal performance.