Adjustable control arm Porsche 986 / 996 / 997 GT3. Porsche 996 / 997 / Boxster 986/987 / Cayman 987  ❭  996010

GT3 Front Suspension System. The Ultimate Front Suspension System



Our GT3 front suspension delivers superior grip and ride quality.

We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.

Ease of adjustment
Easily adjust camber, caster and even track width.

Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.

Low friction, spherical action

Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.

Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.

Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.

Weathersealed

Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.

Improved Geometry and subframe

Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.

Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.

Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.

Fit and finish

Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.

The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.

You can buy spare control arms if they need replacing. Part number 2180016-SA

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180010

The product you are viewing cross references to these numbers

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2020903

The product you are viewing cross references to these numbers

Adjustable lower control arms (lower wishbone)



This is the replacement Control arms for the 2180010 kit.

GT3 Front Suspension System. The Ultimate Front Suspension System


Our GT3 front suspension delivers superior grip and ride quality.

We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.

Ease of adjustment
Easily adjust camber, caster and even track width.

Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.

Low friction, spherical action

Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.

Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.

Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.

Weathersealed

Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.

Improved Geometry and subframe

Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.

Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.

Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.

Fit and finish

Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.

The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180016-SA

The product you are viewing cross references to these numbers