OE Match
SUSPENSIONKIT996.C2
Product Information
Complete replacement solution for both the front and rear suspension of the Porsche 996 C2 (1998-2005) - for Standard cars (none M030). Supplied as two front units (OE ref no 99634304139) and two rear units (OE ref no 99633305185), these dampers aim to restore the original ride quality, handling precision and chassis control.
Fits:
Porsche 996 C2 1998 - 2005 (Standard cars None M030)
Designed to match OE fitment, damping characteristics and durability, they provide a full-axle refresh in one kit.
This kit is ideal for owners replacing worn shocks that cause increased body roll, bounce, vague steering feel or reduced alignment hold. By renewing all four corners simultaneously, the car retains balanced ride and handling behaviour - avoiding the imbalance that can occur with staggered replacements.
Shock absorbers wear with mileage and age: internal oils degrade, seals weaken and damping changes. Symptoms include increased bounce, less responsive steering, tyre “skating,” and uneven ride height. Replacing all corners with matched new units ensures uniform behaviour, restores alignment accuracy and avoids mismatched performance between old/new components.
When to replace:
• Front or rear corners feel soft or bottom-out easily under braking
• The car exhibits excessive body motion or feels unsettled over bumps
• Tyres show uneven wear or the suspension no longer holds alignment
• You’re undertaking a comprehensive suspension refresh or preparing the car for high-performance driving
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT996.C2
The product you are viewing cross references to these numbers
Product Information
OE Match Sports FRONT and REAR shock absorbers PACKAGE, SET OF 4. Complete replacement solution for both the front and rear suspension of the Porsche 996 C2 (1998-2005) - for Standard cars (none M030). Supplied as two front units (OE ref no 99634304139) and two rear units (OE ref no 99633305185), these dampers aim to restore the original ride quality, handling precision and chassis control.
Fits:
Porsche 996 C2 1998 - 2005 (Standard cars None M030)
Designed to match OE fitment, damping characteristics and durability, they provide a full-axle refresh in one kit.
This kit is ideal for owners replacing worn shocks that cause increased body roll, bounce, vague steering feel or reduced alignment hold. By renewing all four corners simultaneously, the car retains balanced ride and handling behaviour - avoiding the imbalance that can occur with staggered replacements.
Shock absorbers wear with mileage and age: internal oils degrade, seals weaken and damping changes. Symptoms include increased bounce, less responsive steering, tyre “skating,” and uneven ride height. Replacing all corners with matched new units ensures uniform behaviour, restores alignment accuracy and avoids mismatched performance between old/new components.
When to replace:
• Front or rear corners feel soft or bottom-out easily under braking
• The car exhibits excessive body motion or feels unsettled over bumps
• Tyres show uneven wear or the suspension no longer holds alignment
• You’re undertaking a comprehensive suspension refresh or preparing the car for high-performance driving
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT996.C2
99633305185
99633305143
99633305104
99633305121
99633305125
99633305133
99633305124
99633305161
99634304139
99634304104
99634304130
99634304120
99634304123
99634304127
99634304136
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber Front. Porsche 996 C2 1998-2005 (99634304139/1
2 x Shock Absorber Rear. Porsche 996 C2/C4 Standard Chassis 99633305185 (99633305185/1
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
Price: €823.60
Due In 11 Days
Related products
95534304
Product Information
Each damper duplicates the original’s damping rate, mounting geometry, and mechanical tolerances to deliver predictable ride quality, handling performance, and suspension comfort. Because vehicles have left- and right-hand dampers, ensure correct side when ordering; ideally replace in pairs for balanced suspension behaviour.
Sold each.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304
The product you are viewing cross references to these numbers
Product Information
Shock Absorber, Front.Each damper duplicates the original’s damping rate, mounting geometry, and mechanical tolerances to deliver predictable ride quality, handling performance, and suspension comfort. Because vehicles have left- and right-hand dampers, ensure correct side when ordering; ideally replace in pairs for balanced suspension behaviour.
Sold each.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304
95534304350
95534304450
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Select Below
Prices from: €306.24
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
95534304X50/1KIT
Product Information
The OE Match Front Shock Absorber Kit includes both left and right shock absorbers, providing a complete front suspension replacement for compatible Porsche Cayenne 957 models. Each shock absorber is designed to replicate the performance of the original Porsche shock absorber, offering the same damping characteristics, mounting geometry and durability as the factory shock absorbers.
SET OF 2, Left and Right.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
By replacing both front dampers together, the set restores balanced suspension behaviour, consistent handling, and a smoother, more controlled ride. This is essential on vehicles where matched damping forces across the front axle are needed for proper steering response and stability.
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304X50
The product you are viewing cross references to these numbers
Product Information
Front shock absorbers (PAIR)The OE Match Front Shock Absorber Kit includes both left and right shock absorbers, providing a complete front suspension replacement for compatible Porsche Cayenne 957 models. Each shock absorber is designed to replicate the performance of the original Porsche shock absorber, offering the same damping characteristics, mounting geometry and durability as the factory shock absorbers.
SET OF 2, Left and Right.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
By replacing both front dampers together, the set restores balanced suspension behaviour, consistent handling, and a smoother, more controlled ride. This is essential on vehicles where matched damping forces across the front axle are needed for proper steering response and stability.
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304X50
95534304350
95534304450
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Shock Absorber, Front. Porsche 9PA1 Cayenne (957) 3.6L / 4.8L 2007-10 (95534304350/1
1 x Shock Absorber, Front. Porsche 9PA1 Cayenne (957) 3.6L / 4.8L 2007-10 (95534304450/1
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Price: €612.48
In Stock - 24 Hour Dispatch
