Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997  ❭  SR108

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1154

The product you are viewing cross references to these numbers

CAM BOLT TOOL for 911 3.2 CARRERA / 964



STOMSKI RACING's version of the P9191 tool combines the basics of the factory tool and improves on it by adding an integral 19mm bushed socket that prevents slippage and rounding off of the cam bolt on the end of the 3.2 cam shafts.
The cam bolt on the 3.2 Carrera requires a torque of 88 foot pounds. Tightening the bolt to this spec, or loosening it using a breaker bar and the factory long-armed cam tool, requires dexterity, leverage, and serious luck that the deep socket does not slip off the head of the bolt, rounding it over, or busting knuckles in the process.
STOMSKI RACING's SR9191 securely holds an impact-quality socket in the center of a precision machined hardened steel socket, ensuring ease and accuracy in loosening the bolt, or setting the required torque. The bushing prevents the socket from being leveraged off the bolt head, keeping it squarely in place for the most accurate torque and security during installation and removal.

The SR9191 replaces both the factory P9191 tool and our SR078.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR9191

The product you are viewing cross references to these numbers

Cam timing indicator fixture (dual) for Porsche 911 / 964 / 993



STOMSKI RACING finally takes the guess work out of timing the 911 engines. No longer do you need to hassle with convoluted setups, indicator contacts slipping off of the valve retainer, or measurements that will not repeat. This fixture indexes off of two cam carrier studs and literally takes only 10 seconds to setup. Once in place, the SR098 consistently and repeatedly holds the dial indicator contact in the same place on the valve retainer- EVERY time.

Includes adapters and extensions for both metric and AGD (inch) indicators.
Anodized aluminum for years of service.

For all 911s including the 993.

Please note: Gauges sold separately.