Original Porsche Part Genuine Porsche part 90150515900

Front bumper retaining bracket.



Fits:
Porsche 911/912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150513120

The product you are viewing cross references to these numbers

Front bumper end cap
The front bumper end cap acts as the finishing trim on the left / right outer edge of the bumper assembly. It fills the opening at the bumper corner, helping complete the bumper’s visual profile while protecting the bumper edge from impact, moisture, and debris. Properly installed end caps contribute to a clean, symmetrical appearance and help maintain the aerodynamic shape of the front fascia.

Fits:
Porsche 911 1969 - 1973

Diagram ref no 40

Function:
•  Cosmetic finish: Completes the bumper’s visual lines on the right side
•  Protection: Shields the bumper edge from scraping, chipping, and corrosion
•  Fit and alignment: Helps the bumper sit flush against the body panels
•  Aesthetic continuity: Matches original design so the front end looks factory correct.

Without a properly fitted end cap, the bumper edge can appear unfinished or exposed, and moisture or debris can enter behind the bumper structure, potentially accelerating rust or deterioration.

Front bumper end caps are often overlooked but play an important role in both appearance and protection. Over time, original caps can become:
•  Cracked, warped, or brittle
•  Paint-damaged or faded
•  Missing due to impact
•  Corroded at mounting points.

A worn or missing end cap detracts from the classic Porsche’s front-end appearance and can expose sensitive areas behind the bumper to dirt and moisture. An OE Match replacement restores the correct silhouette and protective function, helping preserve both aesthetics and the structural integrity of the bumper assembly.

When to replace. Replace this bumper end cap if you notice:
•  Visible damage (cracks, dents, splits)
•  Poor fitment or gaps against the bumper
•  Rust or debris behind the original cap
•  Faded or mismatched trim on an otherwise restored vehicle
•  You are completing a bodywork restoration or cosmetic refresh

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150515

The product you are viewing cross references to these numbers

Aluminium rivet for front bumper end cap no. 90150515700 and 90150515800.

Fits:
Porsche 911 1969-73

Diagram ref no 41

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99919010130

The product you are viewing cross references to these numbers

" T " screw for front / rear bumper deco moulding. 
8 per car. Price shown is for each.

Fits:
Porsche 911 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 4 (front) / 6 (rear)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150515520

The product you are viewing cross references to these numbers

" T " Screw For Front / Rear Bumper Deco Moulding.
The OE Match "T" Screw for Front / Rear Bumper Deco Moulding is a premium-quality replacement fixing designed to securely retain the decorative bumper mouldings on compatible Porsche models. Manufactured to OE specifications for fit, strength and durability, this precision-engineered T-shaped fastener provides a secure mounting point for the front and rear bumper trim, helping maintain the original appearance and correct fitment of the bumper assembly.  
Sold Each.
x8 Required Per Car.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

Diagram Ref No 4 And 6

Manufactured from high-quality corrosion-resistant steel, the T screw is engineered to withstand continual exposure to road spray, moisture, vibration and varying temperatures. Its precision-machined thread and OE-style T-head design ensure correct engagement with the bumper moulding and retaining hardware, providing reliable installation during restoration, accident repair or routine trim replacement.

What This Product Does:  

• Secures the front and rear bumper decorative mouldings.
• Maintains correct alignment of the bumper trim.
• Prevents movement or loosening of the moulding.
• Provides a secure fixing point for the bumper assembly.
• Helps preserve the factory appearance of the vehicle.
• Resists corrosion and vibration during normal driving.
• Provides direct OE-style fitment.
• Forms an essential part of the bumper trim mounting system.

Symptoms Of Wear Or Failure:

• Loose or rattling bumper mouldings.
• Misaligned decorative bumper trim.
• Missing or damaged fixing hardware.
• Corrosion affecting the fastener.
• Stripped or damaged threads.
• Difficulty securing the moulding correctly.
• Trim lifting away from the bumper.
• Increased vibration or movement of the moulding while driving.
• Cosmetic deterioration due to insecure trim.
• Risk of bumper moulding becoming detached.

Why Replacement Matters:

• The bumper moulding fixing hardware is continually exposed to water, road salt, dirt, vibration and temperature changes. Over time, the original fasteners can corrode, seize, lose their clamping force or become damaged during removal, reducing their ability to securely retain the decorative mouldings.
• A damaged or missing T screw can allow bumper trim to become loose, vibrate or separate from the bumper, affecting both the appearance of the vehicle and the security of the moulding. Reusing worn fixings during restoration may also prevent correct alignment and lead to premature trim failure.
• Replacing worn or damaged fasteners with the OE Match "T" Screw restores secure attachment of the front and rear bumper decorative mouldings. Manufactured to OE standards from premium corrosion-resistant materials, this replacement fixing provides factory-style fitment, reliable retention and long-lasting durability, making it the ideal choice for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150515520

The product you are viewing cross references to these numbers

Front Bumper Side Bracket fits Left or Right Hand Side
Sold each - 2 required per car

Restore the correct alignment and secure installation of your classic Porsche's front bumper with this OE Match Front Bumper Side Bracket.. Designed specifically for Porsche 911 and 912 models, this precision-engineered replacement bracket provides the strength and accurate positioning required to support the front bumper while maintaining the clean body lines that define these iconic air-cooled models.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

The front bumper side bracket is a vital structural component that secures the outer section of the bumper assembly to the vehicle body. Over time, original brackets can become bent, corroded or damaged due to minor impacts, age or previous repair work. Replacing worn or distorted brackets restores correct bumper positioning, improves panel alignment and helps eliminate unwanted movement or vibration.

Manufactured to OE Match standards, this replacement bracket delivers excellent fit, durability and a factory-style appearance, making it the ideal solution for concours restorations, accident repairs or routine body refurbishment.

What Does the Front Bumper Side Bracket Do?

The front bumper side bracket supports and locates the outer section of the front bumper assembly.

Its primary functions include:

• Providing a secure mounting point for the front bumper.
• Maintaining accurate bumper alignment.
• Supporting correct body panel gaps.
• Reducing bumper movement and vibration.
• Helping preserve the structural integrity of the bumper assembly.
• Maintaining the original appearance of the vehicle.

Correctly aligned bumper brackets are essential for achieving a factory-quality finish during any restoration.

Why Replace the Front Bumper Side Bracket?

After decades of use, bumper brackets often suffer from wear and deterioration.

Common reasons for replacement include:

• Rust and corrosion.
• Bent or distorted brackets following minor impacts.
• Fatigue caused by years of vibration.
• Poor bumper alignment.
• Damaged mounting points.
• Restoration following accident repairs.
• Replacing missing or incorrect hardware.

Installing a new OE Match bracket restores secure mounting and helps ensure the bumper sits correctly against the bodywork.

Features

OE Match replacement front bumper side bracket. Precision manufactured for accurate fitment. Heavy-duty steel construction. Strong and durable design. Restores correct bumper positioning. Helps maintain factory body panel alignment. Ideal for restoration, accident repair and refurbishment. Direct replacement for worn or damaged original brackets. Suitable for concours-quality restorations.

Why Choose OE Match Body Restoration Parts?

OE Match restoration components are developed for Porsche enthusiasts seeking authentic appearance, dependable quality and precision fitment. Every component is manufactured with attention to the original design, helping preserve the character and value of classic Porsche models. Whether you're restoring a concours-winning example or maintaining a cherished driver's car, OE Match parts provide the confidence of quality engineering and factory-inspired fitment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SMC50513555

The product you are viewing cross references to these numbers

Front Bumper Side Bracket fits Left or Right Hand Side
Sold each - 2 required per car

Restore the precise fit and alignment of your classic Porsche's front bumper with this OE Match Front Bumper Side Bracket. Designed specifically for Porsche 911 and 912 models, this high-quality replacement bracket provides a secure mounting point for the outer section of the front bumper, ensuring correct positioning and maintaining the clean, flowing body lines synonymous with early air-cooled Porsche models.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Diagram ref no 26

The front bumper side bracket is an essential structural component that supports the bumper assembly while helping maintain even panel gaps and overall body alignment. Over time, original brackets can become bent, corroded or weakened through age, accident damage or previous repairs. Replacing worn or damaged brackets restores the bumper to its correct position while providing a solid and dependable mounting solution.

Manufactured to OE Match standards, this replacement bracket offers excellent fitment, durability and a factory-style finish, making it ideal for concours restorations, body repairs or routine refurbishment projects.

What Does the Front Bumper Side Bracket Do?

The front bumper side bracket secures the outer section of the front bumper to the body, providing structural support and maintaining correct alignment.

Its key functions include:

• Securing the front bumper assembly.
• Maintaining accurate bumper positioning.
• Supporting even panel gaps.
• Reducing unwanted bumper movement and vibration.
• Providing structural stability.
• Preserving the original appearance of the vehicle.

A correctly installed bumper bracket is essential for achieving the factory fit and finish expected of a professionally restored Porsche.

Why Replace the Front Bumper Side Bracket?

After decades of service, bumper brackets often deteriorate due to age and environmental exposure.

Common reasons for replacement include:

• Corrosion and rust.
• Bent or distorted brackets following minor impacts.
• Fatigue from years of vibration.
• Poor bumper alignment.
• Damaged mounting points.
• Body restoration or accident repair.
• Missing or incorrect replacement hardware.

Replacing the bracket helps restore secure bumper mounting while improving the overall presentation of the vehicle.

Please verify compatibility with your vehicle's model year, VIN and original part number before ordering.

Why Choose OE Match Body Restoration Parts?

OE Match restoration components are engineered for Porsche enthusiasts who demand authentic appearance, dependable quality and precision fitment. Manufactured with close attention to original factory specifications, OE Match parts help preserve the character and integrity of classic Porsche models. Whether completing a full concours restoration or replacing individual body components, OE Match products deliver the quality and confidence expected by owners and professional restoration specialists alike.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150513501

The product you are viewing cross references to these numbers