adjusting washer Genuine Porsche part 91530226803

Code: 91530226803

Genuine Porsche part

adjusting washer

The product code 91530226803 was also found on these diagrams

303-05 - adjusting shim 0,10 mm

gears and shafts 4. speed transmission - G 930/34 - 911 1978-83

303-15 - adjusting shim 0,10 mm

gears and shafts 5. speed transmission - G 915 - 911 1978-83

303-05 - adjusting shim 0,10 mm

gears and shafts 4-speed gear wheel sets see group 3/03/00

303-05 - adjusting shim 0,10 mm

gears and shafts 4-speed 911 1984-86

303-15 - adjusting shim 0,10 mm

gears and shafts 5-speed 911 1984-86

303-05 - adjusting shim 0,10 mm

Gears and shafts 4-speed - Model 915 - 911 1974-77

303-15 - adjusting shim 0,10 mm

Gears and shafts 5 speed - Models: TYP 915 / TYP 923 - 911 1974-77

303-15 - adjusting shim 0,10 mm

Gears and shafts 5-speed transmission (gear wheel sets 915.300/02) for 911 1972 onwards

303-35 - adjusting shim 0,10 mm

gears and shafts 4-speed transmission for 911 1972 ONWARDS

303-05 - adjusting shim 0,10 mm

gear wheel sets 911 TURBO 1975-77

302-005 - adjusting shim

Replacement transmission / Transmission case / 5-speed 924 1976-79

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

Transmission gearbox teeth. Dog teeth 2nd gear. Porsche 911 1974-86 (915 Gearbox)

91530224200/1

Product Information

Transmission gearbox teeth. Dog teeth 2nd gear.
G915 up to 1975 1st gear / G915 1976>> 2nd. gear

Fits:
Porsche 911 1974-86 (915 Gearbox)

Dog Teeth 2nd Gear 911 1972-86 Symmetrical Tooth Point, 1 slot in hub (915 Trans. 1972-86)

Diagram Ref no 35.

A dog-teeth gear (or synchronizer-gear hub / 1st-2nd gear dog gear) used inside the 915 gearbox. This gear section engages with corresponding hub or clutch-dog components to allow shifting between gears - in particular 1st and/or 2nd gear depending on the configuration.

Gears inside classic 915 transmissions - especially dog / synchronizer-gears - are subject to wear over time: tooth heads can round off, suffer chip-out, or distort under load; synchronizer engagement surfaces may wear and lose precision. This can cause:
• Gear-slip or missed shifts
• Grinding or clash during shifting
• Torque transmission loss or vibration under load
• Accelerated wear of other transmission internals.
Replacing worn gears with a precisely machined, correctly hardened OE-match replacement restores gear-mesh integrity, retains gearbox performance, and helps avoid costly gearbox failure.

When to Replace.
Consider fitting this gear if:
• You hear grinding, clash, or crunching during shifting - especially into 1st or 2nd gear
• Gearbox inspection reveals worn, rounded, chipped, or damaged dog-teeth or synchronizer surfaces
• You are performing a full gearbox rebuild or overhaul
• The gearbox has high mileage or signs of internal wear
• You want to restore factory-spec shifting performance and reliability

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91530224200

91530224200

The product you are viewing cross references to these numbers

5 5 5 5 5

Shifting gear. Porsche 911 72-86 915 Gearbox

91530222709/1

Product Information

The Porsche replacement product code 91530222709 is a precision-engineered component integral to the 915 manual transmission system found in Porsche 911 models from 1972 to 1986

This part is a shift sleeve, also known as a synchromesh sleeve or slider, specifically designed for the 5th gear and reverse gear operations in the 915 gearboxes. The shift sleeve facilitates the engagement and disengagement of gears by sliding along the main shaft to align with the corresponding gear teeth. It plays a crucial role in ensuring smooth and precise gear shifts, particularly when selecting 5th gear or reversing.

Typically crafted from high-strength steel alloys, the shift sleeve is designed to withstand the stresses and forces encountered during gear changes.

Fits:
Porsche 911 72-86 915 Gearbox
Manual transmission

Over time and with extensive use, the shift sleeve can experience wear and degradation, leading to various transmission-related issues:

Difficulty Engaging 5th Gear or Reverse: Excessive wear on the shift sleeve's teeth or detents can result in challenges when attempting to engage 5th gear or reverse, often requiring additional effort or multiple attempts.
Grinding Noises: Worn or damaged shift sleeves may fail to fully engage the gear, causing grinding noises during gear selection.
Slipping Gears: Improper engagement due to a faulty shift sleeve can lead to gears slipping out of engagement, posing safety risks and potential damage to the transmission.
Inconsistent Shifting Feel: A degraded shift sleeve can result in an inconsistent or "notchy" shifting experience, detracting from the smooth operation expected in Porsche vehicles.

OE Match produces products to the Original Equipment Manufacturer (OEM) standard parts, ensures the replacement component meets a stringent quality standard and guarantees proper fitment.

Professional Installation: Given the complexity of transmission systems, it's advisable to have the shift sleeve replaced by a qualified technician to ensure correct installation and to avoid potential damage to the transmission.

Inspection of Related Components: During replacement, it's prudent to inspect related components, such as the synchro rings and gear teeth, for wear or damage to prevent recurring issues.

Diagram ref no 57

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91530222709

313096110322

91530222709

91530222710

91530222711

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

adjusting washer Genuine Porsche part 91530226803