adjusting washer Genuine Porsche part 92833221904

Code: 92833221904

Genuine Porsche part

adjusting washer

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

Bellow Clamp For CV Boot, 34MM. Porsche 911 / 928 / 944 / 959 / 964 / 968 / 986 / 993 / 996 / 997

92833225701

Product Information

Bellow Clamp For CV Boot, 34MM.
The Porsche Bellow Clamp for CV Boot is a genuine OEM clamp designed to secure the constant velocity (CV) joint boot in place. This heavy-duty band keeps the rubber boot tightly sealed to the driveshaft and flange, ensuring that vital CV joint grease stays inside while dirt, water, and debris stay out.
Sold Each.

Fits:

Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 928 4.5L 1978-82
Porsche 928S2 4.7L 1984-86
Porsche 928S4 5.0L 1987-92
Porsche 928GTS 5.4L 1992-95
Porsche 944 2.5L 8V 1982-87
Porsche 944 2.7L 8V 1988-89
Porsche 944S 2.5L 16V 1987-88
Porsche 944S2 3.0L 16V 1989-91
Porsche 944 Turbo 2.5L 8V 1985-88
Porsche 944 Turbo 2.5L 8V 1989-91
Porsche 944 Turbo S 2.5L 8V 1988>>
Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 964 (911) RS 3.6L 1991-93
Porsche 964 (911) RS 3.8L 1991-93
Porsche 964 (911) TURBO 3.3L 1991-93
Porsche 964 (911) TURBO 3.6L 1991-93
Porsche 968 3.0L 1992-94
Porsche 968 Sport 3.0L 1994-95
Porsche 968 CS 3.0L 1993-95
Porsche 968 Turbo S 3.0L 1993-94
Porsche Boxster 986 2.5L 1997-99
Porsche Boxster 986 2.7L 1999-02
Porsche Boxster S 986 3.2L 1999-02
Porsche Boxster S 986 3.2L 2003-04
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) RS 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97
Porsche 993 (911) TURBO 1994-96
Porsche 993 (911) GT2 1994-97
Porsche 993 (911) TURBO S 1994-97
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Porsche 996 C2 3.6L 09/01-2005
Porsche 996 C4 3.6L 09/01-2005
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Porsche 997 TURBO 2007-09
Porsche 997 GT2 2007-09

What This Product Does:

The clamp fastens the rubber or neoprene CV boot onto the shaft and/or housing flange, sealing it in place so the boot remains tight and doesn’t slip.
It helps keep grease inside the CV joint (lubricating the joint) and prevents dirt, water, debris from penetrating the boot and damaging the joint.
Ensures the boot stays under the correct tension so it doesn’t collapse or leak under motion or load.

Symptoms / Signs Of Failure:

Grease leaking out of the CV boot, leading to a messy axle or splattered grease near the joint.
CV boot collapse or deformation — when not secured, the boot may shift or fold.
Ingress of dirt, water or debris into the CV joint, leading to accelerated wear, pitting, or noise.
Clicking, popping, or humming noises under load or while turning, caused by a failing CV joint.
Loose or slipping boot edges, or visible gaps between the boot and flange.

Why Replacement Matters:

Protects the CV joint’s longevity — by keeping grease in and contaminants out, the joint lasts far longer.
Prevents costly drivetrain repairs — a damaged CV joint is expensive; a failed boot clamp is cheap.
Maintains proper boot tension and seal so the boot doesn’t move, stretch, or fail prematurely.
Ensures consistent, quiet performance — a well-sealed boot helps avoid noise from a damaged joint.

Diagram Ref No 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833225701

92833225701

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

adjusting washer Genuine Porsche part 92833221904