adjusting piece Genuine Porsche part 93033203400

Reconditioned replacement driveshaft
Please note:
Reconditioned Alternators are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned (subject to approval of supplier).



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203708

The product you are viewing cross references to these numbers

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

Specification:
Disc Joint,
Tooth Gaps, profile shaft conn.: 28,
without groove in internal component,
Joint Ø: 108 mm,
Length: 40 mm,
Bore Ø: 10.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 94 mm,
with rubber bellow,


The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203400

The product you are viewing cross references to these numbers

3J Driveline Limited Slip Differential (LSD) NXG (NeXt Generation).



Applications: Porsche 924 Turbo

Type: Porsche 924
Ramps Angles: 40/40 70/70 40/60 20/80
50/50 45/50 80/20 50/45
15/60 60/40 60/15
Pre-load (lbs/ft): 0-150
Side Gear: Fine Spline 43T

The latest NXG LSD is designed and manufactured to be the strongest, most progressive and versatile LSD unit in the marketplace today.
The 3J plate pack always run with 8 active surfaces, even in our lighter settings, giving maximum surfaces and surface area contact during use. Our new pre-load spacer helps generate the pre-load. Rather than just have the 2 or 3 settings of other units, we can 'fine tune' to particular pre-load settings complemented with our choice of ramps, to get the perfect LSD set up for you. The Bevel and planet gear pack has been designed to be the smoothest mesh, biggest and strongest tooth profile that we have ever been involved with. Eliminating the rattle, and excessive back lash of other units. Also With the added benefit of dual ramps. Dual Ramps available are 30/90, 40/90, 30/60, 45/45, 50/90, plus more by request.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3J924

The product you are viewing cross references to these numbers

CV joint Constant Velocity Joint

Fitting Position Transmission End
Joint Type CV Joint
Drive Shaft without ABS ring
Length [mm] 40 mm
Int. teeth, diff.side, conn.to transm. 28
Outer diameter [mm] 108 mm

Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203400

The product you are viewing cross references to these numbers

CV joint kit Constant Velocity Joint
Internal Teeth, wheel side 28
Seal Diameter [mm] 108 mm

Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203400

The product you are viewing cross references to these numbers

Driveshaft. Porsche 930 01/75-07/85 Turbo / 911 08/83-07/85 WideBody 

Driveshaft, complete with boots and bolts, rear, 476 mm

Fits:
Porsche 930 3.0L / 3.3L  01/1975 - 07/1985 Turbo
Porsche 911 08/83-07/85  Wide Body

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203700

The product you are viewing cross references to these numbers

Driveshaft. Porsche 911 1985-89 Turbo / WideBody



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203708

The product you are viewing cross references to these numbers