Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
harness Genuine Porsche part 93061204900
Code: 93061204900
Genuine Porsche part
harness
Additional information:
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Price: £16.02
Orderable - 14 - 28 Days
Related products
93061205000
Product Information
This harness is designed to be a stand alone replacement wiring harness for the 911SC models using the 6 pin CDI system. Until now the only way to replace a damaged ignition harness on the SC models was to replace the entire engine harness. This is very expensive and time consuming to do. We have designed this harness to allow the mechanic to just replace the wiring harness that controls the ignition function of the vehicle. The harness will plug directly into the CDI Box, The Ignition distributor and coil. The only two connections that will require some plug dis-assembly are the 12V ignition connection at the rear fuse panel and the tachometer signal wire at the 14 pin plug connector. Both of these wires come with the correct connectors installed on the wires.
Fits:
Porsche 911 1978-83
Porsche 930 3.3L 1978-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061205000
The product you are viewing cross references to these numbers
Product Information
6 Pin CDI HarnessThis harness is designed to be a stand alone replacement wiring harness for the 911SC models using the 6 pin CDI system. Until now the only way to replace a damaged ignition harness on the SC models was to replace the entire engine harness. This is very expensive and time consuming to do. We have designed this harness to allow the mechanic to just replace the wiring harness that controls the ignition function of the vehicle. The harness will plug directly into the CDI Box, The Ignition distributor and coil. The only two connections that will require some plug dis-assembly are the 12V ignition connection at the rear fuse panel and the tachometer signal wire at the 14 pin plug connector. Both of these wires come with the correct connectors installed on the wires.
Fits:
Porsche 911 1978-83
Porsche 930 3.3L 1978-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061205000
93061205000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£310.00
Now £279.00
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
93061200106/1
Product Information
Fits:
Porsche 930 turbo - 1978 to 1983 Left Hand Drive (LHD)
Complete 911 tunnel harness with original spiral colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube, and oil resistant tape as original.
The terminals have rubber sleeves.
Harness comes with detailed connection instructions.
Two new 6 pole male connector , 1 x 14 pole male connector and 1 x relay socket , rubber sleeve and grommet included.
As original colored wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200106
The product you are viewing cross references to these numbers
Product Information
Tunnel wiring harness loom.Fits:
Porsche 930 turbo - 1978 to 1983 Left Hand Drive (LHD)
Complete 911 tunnel harness with original spiral colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube, and oil resistant tape as original.
The terminals have rubber sleeves.
Harness comes with detailed connection instructions.
Two new 6 pole male connector , 1 x 14 pole male connector and 1 x relay socket , rubber sleeve and grommet included.
As original colored wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200106
93061200106
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,133.00
Now £1,019.70
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
93061201605/1
Product Information
Fits:
Porsche 911 turbo - 1978 to 1981 US spec (with Catalytic Converter)
Complete engine harness, including 14 pole connector, rubber boot + protection tube for backup switch cable, alternator connection boots and rubber entry block.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061201605
The product you are viewing cross references to these numbers
Product Information
Engine wiring harness loom. Fits:
Porsche 911 turbo - 1978 to 1981 US spec (with Catalytic Converter)
Complete engine harness, including 14 pole connector, rubber boot + protection tube for backup switch cable, alternator connection boots and rubber entry block.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061201605
93061201605
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,100.00
Now £990.00
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
Free delivery
93061200202/1
Product Information
Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)
Complete main harness with original colour coded wiring. Runs from front fuse box to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions.
• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Please note: Shown fuse boxes and mounting frame are not included and need to be ordered separately.
Special order made to order parts please allow 2 – 3 weeks
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200202
The product you are viewing cross references to these numbers
Product Information
Wire harness Main (Trunk harness). Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)
Complete main harness with original colour coded wiring. Runs from front fuse box to dashboard. Harness will exactly fit like the original. Wire tube, and oil resistant tape as original. Terminals have rubber sleeves. Harness comes with detailed connection instructions.
• As original coloured wiring.
• Original neoprene terminal sleeves used, (no shrink tube!)
• Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
• Gasoline, oil, battery acid, engine coolant resistant.
• High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Please note: Shown fuse boxes and mounting frame are not included and need to be ordered separately.
Special order made to order parts please allow 2 – 3 weeks
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200202
93061200202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1989 3.3L Turbo (930)
£5,206.00
Now £4,685.40
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
93061200109/1
Product Information
Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)
Special order made to order parts please allow 2 – 3 weeks
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200109
The product you are viewing cross references to these numbers
Product Information
Tunnel wiring harness loom.Fits:
Porsche 930 Turbo 1986 LHD (left hand drive)
Special order made to order parts please allow 2 – 3 weeks
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93061200109
93061200109
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,350.00
Now £1,215.00
Orderable - 7 to 10 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information