1 set of brake pads for disc brakes Genuine Porsche part 9A769815100

Brake pads SET OF 4 for one axle.




Mk1 2014 - 2018
Porsche Macan 2.0L (4 cyl.) with BLACK brake calipers (option code 1LA)

Mk2 and Mk3 2019 Onwards
Option codes 1LA and 1LE
17" Black calipers

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8R0698151HBRE

The product you are viewing cross references to these numbers

EBC GREEN Brake Pads.
Sold as set of 4 pads for one axle.




PORSCHE Macan 2.0 Turbo 2014>> (Front)

EBC V4 Greenstuff:
- Fast/Heavy Street Use
- Brake well from cold
- Effective to above 650°C
- Low dust formula
- Generally recommended for cars producing up to 200BHP and / or NOT 4WD

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DP62168

The product you are viewing cross references to these numbers

EBC YELLOW Brake Pads 'FAST ROAD'.
Sold as set of 4 pads for one axle.




PORSCHE Macan 2.0 Turbo 2014>> (Front)

EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.

High-efficiency performance pad for high friction and improved stopping power.

Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.

EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.

Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.

PERFORMANCE



High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad

✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install

In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DP42168R

The product you are viewing cross references to these numbers

Brake Pad size: Width: 132mm / Thickness: 16mm / Height: 77mm
Information about Brake Pad Size

This Product Fits:

PORSCHE MACAN (95B) 2.0L 07/2014 - 09/2018 (FRONT)
PORSCHE MACAN (95B) Diesel 3.0L 07/2014 - 09/2018 (FRONT)
PORSCHE MACAN (95B) 2.0L 10/2015>> (FRONT)

PORSCHE MACAN (95B) 2.9L Turbo AWD 05/2018>> (FRONT)
Front disc brakes, 17-inch disc diameter, brake calliper painted Black (option code: PR:1LA)

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

07B31489

The product you are viewing cross references to these numbers

PAGID Street+ front brake pads


Fits:
Porsche 95B.1 Macan Petrol 2.0ltr V4
Porsche 95B.1 Macan S Petrol 3.0ltr V6
Porsche 95B.1 Macan S Diesel 3.0ltr V6
Porsche 95B.1 Macan GTS Petrol 3.0ltr V6
Porsche 95B.1 Macan turbo Petrol 3.6ltr V6
Porsche 95B.2 Macan Petrol 2.0ltr V4
Porsche 95B.2 Macan S Petrol 3.0ltr V6
Porsche 95B.2 Macan GTS Petrol 2.9ltr V6
Porsche 95B.2 Macan turbo Petrol 2.9ltr V6

Only for cars with Option Code
1LA - Front disc brakes, 17-inch disc diameter, brake caliper painted Black
1LE  - Front disc brakes, 17-inch disc diameter, brake caliper painted Black



PAGID Racing Street+ for Road Use:

STREET+ by PAGID Racing features sportive all round characteristics for street cars. This dedicated compound development maintains a constant high performance
level over a wide range of temperatures.

• Unique Double Retention System with Know-How Transfer From Racing
• Friction Material is Mechanically Fixed to the Backplate
• No Delamination of Friction Material from Steel Backplate
• Motorsport Tech and Innovation for your Vehicle
• Developed for Street Use

Similarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.

The mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material
and the backplate.

• Homologated for road use - Contains less than 0.5% copper by weight
• Best performance behaviour for street upgrade and track day use
• Excellent performing friction material up to high operating temperatures
• Universally applicable for sportive street cars and compatible with track day use
• Suitable for daily use - NVH comfort and accessory kit included
• Mechanical retention system

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

T8121SP2001

The product you are viewing cross references to these numbers

Zimmermann Standard Brake Pad Set- Precision, Comfort & Safety – All in One Set
The Zimmermann Standard Brake Pad Set is part of Zimmermann’s renowned Standard Line, designed for vehicles requiring a reliable, high-performance replacement friction set that meets original performance standards.

Sold as set for one complete axle.
Thickness/Strength: 16mm
Width: 132mm
Height: 77mm
Prepared for wear indicator,

Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18  with BLACK brake calipers (option code 1LA)
Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21  (Option codes 1LA and 1LE 17" Black calipers)
Porsche 95B.3 Macan Petrol 2.0L 265Bhp 2022>> (Option codes 1LA and 1LE 17" Black calipers)

Zimmermann’s brake pad range is produced with quality engineering, ensuring optimal braking comfort, minimal wear, and dependable stopping power. Every set undergoes a development process lasting up to 3 years and thousands of test miles, guaranteeing outstanding performance and reliability across diverse driving conditions.

What They Do
The Zimmermann brake pads are designed to convert kinetic energy into thermal energy during braking, delivering controlled deceleration with minimal noise and consistent pedal feedback.

Key features and benefits:

• Tailored friction compounds: Formulated using up to 25 different raw materials for optimal grip, balance, and fade resistance.
• Vehicle-specific design: Each pad set is tuned to match the braking characteristics of its intended vehicle type.
• High comfort & low noise: Chamfered edges, anti-vibration layers, and precision backing plates ensure quiet operation.
• Long service life: Durable friction surfaces and quality binding ensure minimal wear, even under demanding conditions.
• Corrosion-resistant components: Protective coatings safeguard against rust, ensuring long-term performance.
• ECE R90 conformity: Certified to meet European safety and braking standards.

Zimmermann’s standard pads are trusted by professionals and enthusiasts alike for smooth, predictable braking and a refined driving experience.

Why Brake Pads Fail

• Even the best pads will wear over time. Common causes of brake pad failure include:
• Friction material wear: Continuous heat and pressure gradually thin the pad surface, reducing braking power.
• Glazing or overheating: Prolonged heavy braking can harden the pad surface, decreasing friction efficiency.
• Uneven contact or alignment issues: Warped rotors or improper installation can cause uneven wear and vibration.
• Contamination: Dust, oil, or road debris can penetrate the braking surface, reducing grip and causing squeal.
• Neglected maintenance: Worn pads increase rotor wear, leading to higher repair costs and potential safety risks.
• Regular inspection and timely replacement ensure consistent braking performance and protect your vehicle’s entire braking system.

Why They Should Be Replaced

• Replacing worn or underperforming brake pads with the Zimmermann set ensures your vehicle maintains:
• Reliable braking performance: Fresh pads restore maximum friction, improving stopping distance and response time.
• Driving comfort & quiet operation: Maintains Zimmermann’s hallmark of smooth, low-noise braking.
• Protection for brake discs: Prevents premature rotor wear and costly component damage.
• Consistent safety: Guarantees even pressure distribution and stable pedal feel in all conditions.
• Efficiency & lifespan: New pads maintain proper heat dissipation and energy transfer, extending both pad and disc life.

Zimmermann’s precision-engineered standard brake pads ensure reliability, safety, and long-lasting value for everyday and performance-oriented drivers alike.

Your Advantages at a Glance

• Over 1,000 different Zimmermann pad variants available
• Stored capacity exceeding 120,000 sets for fast availability
• Long lifespan with low dust generation
• Very smooth performance and consistent pedal feel
• Excellent corrosion protection
• Conforms to ECE R90 standards
• Precision production for OE-quality fitment
• Quality controlled at every stage of manufacture       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC698151HZIM

The product you are viewing cross references to these numbers

Always on the Bright Side – With Dust-Reduced Brake Pads from Zimmermann
The Reduced Brake Dust Pads represent the next evolution in braking innovation — designed for discerning drivers seeking superior braking performance, cleaner wheels, and longer component life. Developed by the Otto Zimmermann R&D department, these pads are the result of continuous innovation to enhance safety, comfort, and cleanliness on the road.

Sold as set for one complete axle.
Thickness/Strength: 16mm
Width: 132mm
Height: 77mm
Prepared for wear indicator,

Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18  with BLACK brake calipers (option code 1LA)
Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21  (Option codes 1LA and 1LE 17" Black calipers)
Porsche 95B.3 Macan Petrol 2.0L 265Bhp 2022>> (Option codes 1LA and 1LE 17" Black calipers)

Quality
Our product range in the brake pads sector includes over 1,000 different items, covering the vast majority of vehicles currently on the road. To ensure wholesalers have rapid access to our products, we maintain a warehouse with the capacity to store more than 120,000 sets of brake pads.

Every vehicle has its own unique characteristics and therefore specific requirements for brake pads. Our products are made using up to 25 different raw materials, carefully combined to achieve the highest standards of quality, reliability, and safety. Each brake pad undergoes a rigorous 2–3 year development process, including extensive road testing. The “OE Approvals” from leading automobile manufacturers are a testament to the expertise and precision of our specialists.

Your Advantages:

• Over 1,000 product variants
• Large storage capacity (120,000 sets) for rapid availability
• OE quality standards
• OES quality Long service life Smooth and consistent braking performance
  
• Complies with ECE R90 regulations
• Excellent corrosion protection
• Complete range from a single supplier

 What they do
Zimmermann’s R&D:z brake pads employ a special friction compound containing organic fibers, which forms a thin, protective transfer layer between the brake disc and pad during braking.

This innovative layer:

• Improves pedal feel and stopping precision.
  
• Provides high resistance of the friction coefficient across varying temperatures.
  
• Minimizes abrasion and dust creation, keeping rims cleaner for longer.
  
• Offers smoother, quieter operation with significantly less vibration.
  
• Enhances braking comfort and heat resistance for consistent, fade-free performance.

Each braking cycle renews this friction layer, continuously maintaining optimal grip and reducing wear — ensuring every stop feels as confident as the first.

Why brake pads fail

Even advanced pads such as the Zimmermann range can deteriorate over time if not properly maintained or installed:

• Material Wear: Friction compounds naturally thin with mileage, reducing stopping power and increasing braking distance.
  
• Thermal Overload or Glazing: Heavy, repeated braking can overheat pads, hardening the surface and diminishing friction performance.
  
• Uneven Disc Contact: Poor fitment or warped rotors can cause localized wear, vibrations, and noise.
  
• Contamination or Corrosion: Exposure to dirt, salt, or moisture can compromise pad integrity, accelerating wear.
  
• Old-Type Materials: Non-optimized compounds create excessive dark dust and noise compared with Zimmermann’s advanced dust-reduced formulation.

Why they should be replaced

• Maintain Braking Efficiency: Replacing pads before the friction material wears out ensures maximum safety and consistent stopping distances.
• Preserve Wheel Appearance: The Zimmermann dust-reduced compound produces lighter, brighter dust that’s nearly invisible, helping rims stay clean. 
• Enhance Driving Comfort: New pads eliminate brake squeal and vibration, restoring smooth pedal response.
• Reduce Environmental Impact: Less abrasion means fewer particulates released into the environment — an eco-friendly braking solution.
• Prolong Brake System Life: Lower wear rates protect both discs and calipers, saving on long-term maintenance costs.

In short, timely replacement with Zimmermann pads keeps your braking system precise, quiet, and clean — for confident, sustainable performance.

Key Advantages at a Glance

• High resistance of friction coefficient
• Lighter and less dust → cleaner rims
  
• Better braking performance & pedal feel
• Significantly less vibration → less noise
  
• Longer lifespan due to lower wear
• Reduced abrasion → less environmental pollution
  
• High heat resistance & tensile strength

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC698151HZIMR

The product you are viewing cross references to these numbers