Boots / Rear Lid / Locks and Latches

Rear engine lid, ALUMINIUM
This OE Match aluminium rear engine lid is manufactured to replicate the original Porsche design while offering the benefits of lightweight construction. Based on the same design as the steel version (91151201000), it ensures precise fitment with factory hinges, latch mechanisms, and grille components.

Fits:
Porsche 911 F model 1969-73

Constructed from high-quality aluminium, this panel maintains correct contours and mounting points, ensuring seamless integration with original parts.

Aluminium engine lids were used on certain performance-focused Porsche models to reduce weight, particularly at the rear of the vehicle, improving handling balance and responsiveness. This OE Match version is ideal for both restoration and performance-oriented builds.

The engine lid protects the engine compartment while allowing airflow through the grille for cooling. The aluminium construction reduces rear-end weight, improving overall vehicle dynamics and responsiveness.

Function
• Covers and protects the engine compartment
•  Allows airflow for engine cooling
•  Reduces overall vehicle weight compared to steel
•  Improves handling and weight distribution
•  Maintains original factory styling

Original steel lids may suffer from corrosion, damage, or incorrect replacements over time. Upgrading to an aluminium version offers both restoration accuracy (for certain models) and performance improvements through weight reduction.

This is especially beneficial for enthusiasts aiming to replicate period-correct lightweight builds or improve driving dynamics.

When to replace
•  Rust or corrosion on original steel lid
•  Accident or structural damage
•  Poor panel alignment or fitment
•  Weight reduction for performance builds
•  During restoration or upgrade projects

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201000ALU

The product you are viewing cross references to these numbers

Rear engine lid, STEEL
This OE Match rear engine lid is a direct replacement for Porsche part number 91151290302GRV, manufactured to original specifications for accurate fitment and restoration quality. It is designed for Porsche 911 and 912 models from 1967 to 1973.

Fits:
Porsche 911 Carrera 1969 - 1973 (not Turbo)

This product supersedes Porsche's old part numbers:  91151290302

Constructed from high-quality steel, this panel replicates the factory design, including correct contours and mounting points, ensuring compatibility with original components.

As part of the rear bodywork, the lid integrates with factory hinges, latch mechanisms, and grille assemblies. Steel versions were commonly fitted to standard models, offering durability and long-term strength, while still maintaining the classic appearance.

The engine lid protects the engine compartment from external elements while allowing airflow through the grille to support cooling. It also forms a key structural and visual element of the iconic Porsche 911 rear design.

Function
• Covers and protects the engine compartment
•  Allows airflow for engine cooling
•  Maintains rear body structure and alignment
•  Preserves original factory styling

Original engine lids are prone to rust, corrosion, and damage over time. Incorrect or poorly fitting panels can affect alignment, cooling airflow, and overall vehicle appearance. Replacing with a correct OE Match steel lid restores proper fitment, ensures durability, and maintains the original look—especially important for classic Porsche restoration.

When to replace:
•  Rust, corrosion, or structural damage
•  Poor panel alignment or fitment
•  Incorrect or non-original lid fitted
•  Damage from rear impact
•  During full restoration or repaint

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151290302GRV

The product you are viewing cross references to these numbers

Engine lid, REAR, with hole for license plate lamp



Fits:
Porsche 911 2.0L-2.4L 08/1967-12/1973

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151290302GRV

The product you are viewing cross references to these numbers

Very high grade chrome grille for early 911 with twin bars in the centre.

Fits:
Porsche 911 (2.0) 01/63-07/67
Porsche 912 (1.6) 01/65-02/70
Can also be fitted to newer models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155904121

The product you are viewing cross references to these numbers

Rear lid complete lock assembly.

Fits:
Porsche 911 1965-89
Porsche 930 3.0L / 3.3L 1975-89

Diagram ref no 14 and 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93051205999

The product you are viewing cross references to these numbers

Rear lid release cable.

Fits:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1978-89
Porsche 964 1989-94

911 Coupe FRONT 2.0-2.4 08/69-07/73
911 FRONT 2.7-3.3 08/73-07/89
911 FRONT 2.0 01/63-07/69
911 REAR 2.0-3.3 01/63-07/89
964 REAR 3.6 07/89-07/90

This product supersedes Porsche's old part numbers:
- 90151107320

Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151107321

The product you are viewing cross references to these numbers

Rear lid release cable.

Fits:
Porsche 911 1965-89
Porsche 911 (930) Turbo 1978-89
Porsche 964 1989-94

911 Coupe FRONT 2.0-2.4 08/69-07/73
911 FRONT 2.7-3.3 08/73-07/89
911 FRONT 2.0 01/63-07/69
911 REAR 2.0-3.3 01/63-07/89
964 REAR 3.6 07/89-07/90

This product supersedes Porsche's old part numbers:
- 90151107320

Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151107321

The product you are viewing cross references to these numbers

Rear lid with centre pillar, ALUMINIUM
The OE Match Aluminium Rear Engine Lid is a lightweight version of the classic Porsche deck lid, designed for 911 and 912 long wheelbase (LWB) models (1969–1973). It replaces the original steel panel with a lighter aluminium construction.

Fits:
Porsche 911 F  1965 - 1968 SWB (short wheel base)
*** Only for vehicles without a rear window wiper.

This OE Match aluminium rear engine lid is manufactured to replicate the original factory design while offering the benefits of reduced weight. It follows the same fitment and geometry as the standard 91151290302 steel lid, ensuring compatibility with factory hinges, latch systems, and grille components.

Lightweight aluminium engine lids were used on certain performance-focused models such as early 911S variants, where reducing rear weight helped improve handling and responsiveness

The engine lid covers and protects the engine compartment while allowing airflow through the grille for cooling. The aluminium construction reduces weight at the rear of the vehicle, helping improve balance and driving dynamics.

Function
•  Covers and protects the engine compartment
•  Allows airflow for engine cooling
•  Reduces overall vehicle weight (compared to steel)
•  Improves weight distribution and handling

Original engine lids may suffer from corrosion, damage, or incorrect replacements over time. Upgrading to an aluminium version offers both restoration accuracy (for certain models) and improved performance through weight reduction. It is especially beneficial for enthusiasts restoring period-correct cars or building lightweight performance-focused classics.

When to replace
•   Rust or corrosion on original steel lid
•   Accident or structural damage
•   Poor panel fitment or alignment
•   Weight reduction for performance builds
•   During full restoration or upgrade

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151201023ALU

The product you are viewing cross references to these numbers

Rear lid with centre pillar, STEEL
This OE Match rear boot lid (engine lid / deck lid) is a direct replacement for Porsche part number 90151201023, manufactured to original specifications for accurate fitment and authentic restoration. It is designed specifically for 1965–1968 short wheelbase (SWB) Porsche 911 and 912 models.

Fits:
Porsche 911 F  1965 - 1968 SWB (short wheel base)
*** Only for vehicles without a rear window wiper.

Constructed from high-quality steel, this rear deck lid replicates the original factory design, including the early centre support pillar beneath the grille, a distinctive feature of pre-1968 models. This structural bar divides the intake opening and is critical for authenticity in restoration projects.

The rear boot lid encloses the engine bay, protecting internal components while allowing airflow through the grille for engine cooling. It also serves as a structural and aesthetic body panel, contributing to the vehicle’s classic design. For early 911 models, the correct lid design ensures proper airflow characteristics and maintains period-correct appearance.

Function
• Covers and protects the engine compartment
•  Allows airflow for engine cooling via grille openings
•  Maintains structural integrity of rear body section
•  Preserves original factory appearance and design

Original rear lids can suffer from corrosion, accident damage, or incorrect replacement with later-style panels. Early SWB lids with the centre pillar are increasingly rare and highly sought after for accurate restorations. Replacing with a correct OE Match panel restores factory appearance, ensures proper fitment, and preserves the historical integrity of the vehicle.

When to replace:
•  Rust, corrosion, or structural damage
•  Incorrect later-style deck lid fitted
•  Poor panel alignment or fitment
•  During full body restoration or repaint
•  Authenticity correction for classic builds

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151201023

The product you are viewing cross references to these numbers

Rear lid with centre pillar, steel.

Fits:
Porsche 911 F (1965 - 1968) SWB (short wheel base)
*** Only for vehicles without a rear window wiper.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151201023

The product you are viewing cross references to these numbers

Rear lid, aluminium.



Fits:
Porsche 911 F model 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201000

The product you are viewing cross references to these numbers

Rear lid, steel.



Fits:
Porsche 911 F model 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151201056

The product you are viewing cross references to these numbers

Rennline titanium 911R style engine lid hinge set. 



Fits:
Porsche 911 - 1964 to 1989

Save weight and add style to your 911 with our 911R Decklid Hinge

The only titanium 911R decklid hinge on the market, this hinge is guaranteed to be the lightest and most durable option available.

Product Description

Convert your standard 911 decklid to the 911R “Flip over” style with our 911R inspired titanium decklid hinges. 
This kit includes a unique backing piece that forms to the contour of your decklid for a simple, easy installation. 

• Titanium Design
• Stainless Steel Hardware
• Unique Backing bracket to support third mounting hole on engine lid (decklid)
• Does not work with decklid struts
• Quick release Clevis Pin

Please Note:
Requires drilling to car as well as the engine lid (decklid)
Fitment on aftermarket engine lids is not guaranteed

Rubber stop for front bonnet / rear lid.


Porsche 911 2.0-3.3 1965-89
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76


Porsche 911 2.0-3.3 1965-73
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970303650

The product you are viewing cross references to these numbers

Rubber washer for grille fastening screw. Sold each.



Fits:
Porsche 911 / 912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90151179121

The product you are viewing cross references to these numbers

Smuggler's Box Cover Seal for Left Hand Drive Cars Only



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150449102

The product you are viewing cross references to these numbers