Rear Spoilers / Aerofoil

Rear lid spoiler in dry carbon fibre. 



Fits:
Porsche 992 Carrera - 2019 Onwards
Porsche 992 Targa - 2019 Onwards

Prepreg dry carbon fibre with high polished black finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992CARBLIP

The product you are viewing cross references to these numbers

Rear Lid Spoiler, in satin black and includes the mounting material.
The TÜV parts certificate (§19.3).

Fits:
For all Porsche 992 Carrera T | S | 4 | 4S | GTS | GT3 Touring

The Moshammer 992 Carrera Rear Lid Spoiler provides optimal aerodynamic properties while being a beautiful oem+ design element that creates a unique look for your Porsche 911 992. With an stunning design as well as the craftsmanship that fits seamlessly, the 992 deck lid spoiler that won’t alter your original hardware.

Functionality of the 992 Carrera Rear Lid Spoiler

This is a softer version of the ducktail spoiler but with an aggressive, raised extension area.
The functionality of the Porsche active aerodynamic rear spoiler is retained and is not compromised. This also includes unmatched performance and elegance.

Thus, the 992 Rear Lid Spoiler with it‘s TÜV certification serves it‘s purpose which does not hinder the performance but rather enhances it also bringing suaveness look for your Porsche.

This spoiler blends well with all other refinements in this segment.

Installation: Unless specified otherwise, MOSHAMMER components are typically installed using original screw points and, when needed, secured with a special adhesive.

Please note:
This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.40.3022

The product you are viewing cross references to these numbers

Rear Spoiler Control Unit 971.2 / 976 Panamera / 992.1 Carrera / 9J1.2 Taycan / 992 GT3/RS/ST



Porsche 992.1 Carrera 2019 - 2021
Porsche 992 GT3/RS/ST 2021 onwards
Porsche 9J1.2 Taycan  2024 onwards
Porsche 971.2 Panamera 2021-2024
Porsche 976 Panamera 2024 onwards

Porsche 971.1 Panamera 2017 - 2020 *Note: Technical bulletin applies to this model, additional parts are required to install to existing vehicle wiring. See Technical Information


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAA907483

The product you are viewing cross references to these numbers

Rear Spoiler in dry carbon fibre. 



Fits:
Porsche 992 Targa - 2019 Onwards

Prepreg dry carbon fibre with high polished black finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992TARGACARBWING

The product you are viewing cross references to these numbers

Rear spoiler lip ABS plastic

Fits:
Porsche 992 Carrera 2S / Carrera 4S - 2019 Onwards

This ABS plastic rear spoiler is a great way to give your 992 an OEM+ look with a modern spin on the classic Porsche design. 
This spoiler is made from ABS (allowing it to be painted) using state-of-the-art manufacturing techniques for a factory fit and finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827952D

The product you are viewing cross references to these numbers

Rear spoiler lip carbon fibre. 

Fits:
Porsche 991 Carrera 2S / Carrera 4S - 2019 Onwards

This Carbon Fibre rear spoiler is a great way to give your 991 an OEM+ look with a modern spin on the classic Porsche design. 
This spoiler is made from carbon fiber using state-of-the-art manufacturing techniques for a factory fit and finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827952D

The product you are viewing cross references to these numbers

Rear spoiler Sport Classic. 



Fits:
Porsche 992 - 2019 Onwards


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827940NG2X

The product you are viewing cross references to these numbers

Rear spoiler wing blade - Carbon Fibre
Spoiler blade only, wing tips sold separately

Fits:
Porsche 992 GT3 - 2019 Onwards

Rear wing blade available in the following finish
Gloss Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1016.992.08

The product you are viewing cross references to these numbers

Rear spoiler wing end plates - Carbon Fibre. 
Sold as a pair

Fits:
Porsche 992 GT3 - 2019 Onwards

Rear wing end plates available in the following finish
Gloss Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1016.992.07

The product you are viewing cross references to these numbers

Rear spoiler. 



Fits:
Porsche 992 Dakar

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827940PG2X

The product you are viewing cross references to these numbers

Rear spoiler.



Fits:
Porsche 992 turbo / turbo S

Not for models with original Aerokit.

Experience the Perfect Fusion of Form and Function.
Introducing the cutting-edge Moshammer Performance Rear Wing, a game-changer exclusively engineered by Moshammer for the 992 turbo and turbo S.

The existing aerodynamic configurations of the Porsche Active Aerodynamics (PAA) remain unimpaired.
The impeccable performance system is further enhanced by the Moshammer Performance Rear Wing.

Positive properties compared to a fixed rear wing:

• Low drag
• High downforce
• Unchanged top speed
• Increased airbrake function
• More driving stability

To preserve the harmonious lines of the Porsche, it is best to match the Moshammer Performance Rear Wing with your Porsche 992 Turbo’s exterior colour.
Available in Gloss Carbon Fibre or Unpainted finish

Mounting material is included.

With TÜV parts certificate §19.3 (in prep).

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.20.302

The product you are viewing cross references to these numbers

Rear Wing End Plate Logo "Weissach RS"

Fits:
Porsche 992 GT3 RS

Side "Weissach RS" Logo On Rear Wing, Coloured

“Weissach RS” Logo On The Side Of The Rear Wing In Indigo Blue, Pyrored, Neodyme Or Grey Accent Colour.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204482093

The product you are viewing cross references to these numbers

Rear wing end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3 - 2019 onwards

Premium Carbon fiber wing endplates for the Porsche 992 GT3.

We reimagined the design of the rear end of the 992 GT3 and the OEM plastic wing endplates are an easy first upgrade for your GT3. Over 30% larger for improved aero efficiency yet 50% lighter than the OEM units, the lift-to-drag ratio is improved with the larger surface area of the endplates under the leading edge of the rear wing. 

The larger endplates help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. Our design builds on the OEM units by correcting two important lines, the first is the rear ducktail wing and the other one spills into the rear arches and window. A perfect marriage of form and function.

Weighing in at only 150 grams each. The endplates are made by hand from prepreg carbon of the highest quality. Using aluminium molds and baked to perfection. Our inner skeleton structure is made out of CFRP that is light weight but gives the hollow structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with the same adhesive Porsche uses from the factory (3M VHB)
We also include a small bottle of primer liquid from 3M, that will further improve the bond of your Porsches new wings. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new Ångström endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Laminated with a skeleton manufactured from high-grade, heat and chemically resistant CFRP
• Improved design and aesthetics
• Larger surface area reducing vortices
• Enhanced aerodynamic performance
• Use OEM adhesion method (3M VHB™)
  
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827867

The product you are viewing cross references to these numbers

Rear wing end plates - Carbon Fibre. 
Sold as a pair

Fits:
Porsche 992 GT3 RS - 2019 Onwards

Rear wing end plated available in the following finish
Gloss Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1016.992.3RS..06

The product you are viewing cross references to these numbers

Rear spoiler / rear wing / rear lip / spoiler lip for Porsche 911/992

• Suitable for Porsche 911/992 2019>>

• Porsche 992 Carrera 2 3.0L
• Porsche 992 Carrera 4 3.0L
• Porsche 992 Carrera 2 Cabriolet 3.0L
• Porsche 992 Carrera 4 Cabriolet 3.0L
• Porsche 992 Carrera 2S 3.0L
• Porsche 992 Carrera 4S 3.0L
• Porsche 992 Carrera 2S Cabriolet 3.0L
• Porsche 992 Carrera 4S Cabriolet 3.0L
• Porsche 992 Targa 4 3.0L
• Porsche 992 Targa 4S 3.0L

• Vehicle-specific TÜV parts certificate
• Good fit, as no universal part but specially developed for this type of vehicle!
• Clean and simple TÜV-tested attachment using 3M ™ Acrylic Plus adhesive tape PT 1100 with extremely high instant adhesion and high adhesive strength

• The assembly with the 3M ™ adhesive tape PT 1100 takes place in three simple steps:
- Clean the surface with the enclosed 3M cleaning cloth
- Remove the protective strip from the pre-assembled and pre-assembled adhesive tape
- Glue on, done!

• 3M ™ Acrylic Plus adhesive tape PT 1100 is a 4-ply black double-sided acrylic adhesive tape with very high instant adhesive strength that was specially developed for the automotive sector and is ideally suited for attaching rigid attachments where an aesthetic visible edge is desired. PT1100 has very good adhesion to a large number of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic properties of the PT1100, tensions in the adhesive seam are superbly reduced, so that extremely durable connections are created.
• High durability even in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistance
• Easy dismantling without damage to the paint
• The rear lip is made of high-quality ABS material and has a structured (grooved) surface, making the spoiler lip very unsusceptible to scratches
• Due to the structured surface, no painting is necessary! (Product is unpainted)
• Including assembly instructions
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.