Boots / Rear Lid / Locks and Latches

Ball bearing for rear spoiler transmission gear.

Fits:
Porsche 964 C2 / C4 / RS 1989-94
Porsche 993 1995-98

A sealed high quality SKF ball bearing for use in the Porsche 964 and 993 rear spoiler mechanism. The sealed bearing will stand up to the harsh environment in the engine compartment.

You will need one of these to get rid of a grinding noise when the rear spoiler is raised or lowered, a money-saving DIY instead of buying a complete mechanism from Porsche.

We have an article for changing this ball bearing, please CLICK HERE

Fits to number 7 on the diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96462412100

The product you are viewing cross references to these numbers

Bearing screw rear spoiler mechanism. M 6 x 17.
 


Fits:
Porsche 964 C2  / C4 / RS 1989-94
Porsche 993 C2  / C4 / RS 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96451272300

The product you are viewing cross references to these numbers

Rear Boot Lock Upper Part.


Fits:
Porsche 993 Carrera 1994-98 (Rear Lid)
Porsche 993 TURBO 1994-98 (Rear Spoiler)
Porsche 996 Carrera 1998-05
Porsche 996 TURBO 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651221301

The product you are viewing cross references to these numbers

Rear lid hinge.



Fits:
Porsche 993 1995-98

Click 'Zoom in' for a large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351202303

The product you are viewing cross references to these numbers

Rear lid lock with microswitch.


Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96551205201

The product you are viewing cross references to these numbers

Rear Lid Release Cable.
Ensure smooth and reliable operation of your Porsche 911’s rear engine/trunk lid with this genuine release cable. Designed for the 964 and 993 model series, this cable kit restores the connection between the interior handle and the rear lid latch. If you’ve experienced a stiff, non-responsive or broken lid release, replacing this cable will restore the correct function and reliability.

Fits:

• Porsche 964 (911) C2 1991-93
• Porsche 964 (911) C4 1991-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97

Diagram Ref No 9

What This Product Does:

• When you pull the release handle inside the car (or via the remote release), this cable is under tension and the movement pulls the latch lever on the rear lid, allowing the lid to open.
• The “guide tube” part provides support for the cable, keeps it aligned, prevents kinks or chafing, and helps maintain smooth operation.
• Without this cable functioning properly, the rear lid may not open (or may open unpredictably), causing inconvenience or failure to gain access to the engine bay/trunk area.

Symptoms Of Wear Or Failure:

• The lid release inside the cabin doesn’t operate the rear lid — i.e., you pull the handle and the lid doesn’t release.
  
• Sticky, stiff or jerky release operation — the cable may be sticking in the guide tube, stretched or frayed.
  
• Visible damage to the cable or guide tube — corrosion, frayed wire, broken sheath, kinks in the tube.
  
• Rear lid latch mis-behaviour — the lid may pop open unexpectedly, not latch properly, or you may need to repeatedly pull the handle.
  
• When restoring a vehicle or replacing rear lid components (hinges, latch, seal) the cable is often overlooked but can be worn due to age (especially in 964/993 cars).

Why Replacement Matters:

• Ensuring reliable access: The rear lid is your access point for the engine bay/trunk; a non-resilient or broken cable means you might be unable to open the lid when needed.
• Safety & utility: If the lid cannot latch properly or stays partially unlocked, this could cause it to fly open while driving or not secure properly.
• Prevents further damage: A worn cable can cause excessive load on the latch, hinge or release handle mechanism, accelerating wear or causing mis-alignment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351206300

The product you are viewing cross references to these numbers

Rear spoiler bearing screw,  Micro-self-locking M 6 X 23.
Sold each. Required 4.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 4 (964) / 8 (993)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96451272202

The product you are viewing cross references to these numbers

Rear spoiler bearing screw,  Micro-self-locking M 6 X 23.
Sold each. Required 4.

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Diagram ref no 4 (964) / 8 (993)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96451272202

The product you are viewing cross references to these numbers

Rear spoiler centre bar.



Fits:

Porsche 993 Carrera 2S / Carrera 4S

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351212300G2X

The product you are viewing cross references to these numbers

Rear Spoiler Gasket.


Fits:
Porsche 993 1994-98 M602
* M602 - Raised stop lamp

Left or Right
Please Select below

Click picture for large parts diagram.
Diagram ref no 23.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99350468

The product you are viewing cross references to these numbers

Rear Spoiler Microswitch.


Fits:
Porsche 964 C2 / C4 / Carrera RS 1989-94
Porsche 964 Turbo-Look
Porsche 993 1995-98


Click 'Zoom in' for large parts diagram.
Diagram ref no 1.


* Please check and match the part number of your microswitch in your car before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96461310701

The product you are viewing cross references to these numbers

Rear spoiler plate desk pad. Sold each.



Fits:
Porsche 964 C2 / C4 / RS 1989-94
Porsche 993 1995-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96451246700

The product you are viewing cross references to these numbers

Rear spoiler top grille reinforcement.

Fits:
Porsche 993 C2S / C4S 1997>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99351277701

The product you are viewing cross references to these numbers

Rear spoiler transmission gear.

Fits:
Porsche 964 C2 / C4 / RS 1989-94
Porsche 993 1995-98

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96462412100

The product you are viewing cross references to these numbers

Stainless Steel upgrade for factory hinge pin.
Sold individually. Two (2) required per vehicle



Fits:
Porsche 964
Porsche 993

Segment Tooth Sector for Rear Spoiler.


Fits:
Porsche 964 C2 / C4 / RS 1989-94
Porsche 993 1994-98


Click 'Zoom in' for large parts diagram.
Diagram ref no. 31

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96451211100

The product you are viewing cross references to these numbers