Bonnet / Rear Lid / Spoiler Activators & Motors

Plastic bracket for rear spoiler drive unit & microswitch. 

Fits:
Porsche 996 Turbo 2001-05 

NOTE: This part is not shown in the parts illustration, but it is the plastic bracket for the drive unit, which corresponds to diagram references 11, 12, and 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99661314800

The product you are viewing cross references to these numbers

Front Bonnet Opener Microswitch.



Fits:
Porsche 986 Boxster 1997-04
Porsche 996 1998-05
Porsche 996 Turbo/GT2 2001-05
Porsche 996 GT3 1999-05
Porsche Carrera GT 2004-06

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99661320600

The product you are viewing cross references to these numbers

Prevent spoiler warning MicroModule Device

Fixed wing or spoiler warning issues ? MicroModule Device™ is a great solution for 996 Turbo owners that have a FIXED WING or get the dreaded Spoiler Warning. For Turbos with integrated decklid and wing like the aerokit wing or other aftermarket wings. The MicroModule Device™ is easily hooked up to the factory wiring and PREVENTS all instances of the SPOILER WARNING. Less expensive than a new GT2 or GT3 lid wiring harness. Full set of illustrated step by step instructions emailed with order.

NOTE:  Included with every Rennkit eRam Kit.

Fits:
Porsche 996 Turbo 2001-2005




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

Micro-M

The product you are viewing cross references to these numbers

Bonnet Or Boot Opener Handle. LHD CARS



Fits:
Porsche 996 C2 / C4 >>2000
Porsche Boxster S

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655151

The product you are viewing cross references to these numbers

Bonnet Or Boot Opener Handle. RHD CAR



Fits:
Porsche 996 C2 / C4 >>2000
Porsche Boxster S

This product supersedes Porsche's old part numbers:
- 99655151206V01

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655151

The product you are viewing cross references to these numbers

Rear Spoiler / Lid Actuator.



Fits:
Porsche 996 1999-2005
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651205500

The product you are viewing cross references to these numbers

2" eRam Kit™ electric wing system for 996 Turbo
Up/Down Speed of 5 sec.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-2-SS

The product you are viewing cross references to these numbers

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-3-S

The product you are viewing cross references to these numbers

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-4-S

The product you are viewing cross references to these numbers

4.75" eRam Kit™ electric wing system for 996 Turbo
Highest electric wing lift Kit™ possible - Similar height to GT3 and GT4 wings, provides the ultimate Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-475-S

The product you are viewing cross references to these numbers

4.75" eRam Kit™ electric wing system for Porsche 996TT Fitted With 997T Spoiler.
Highest electric wing lift Kit™ possible - Similar height to GT3 and GT4 wings, provides the ultimate Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005 (Fitted With 997T Spoiler)

Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-475-7W-S

The product you are viewing cross references to these numbers

Rear spoiler hydraulic lines.



Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651291601

The product you are viewing cross references to these numbers

Rear spoiler hydraulic ram. 



*when ordering new hydraulic rams you should also order one set of Code: 99651291600 Rear Spoiler Hydraulic Lines.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651295

The product you are viewing cross references to these numbers

Rear spoiler hydraulic ram. 



Fits:
Porsche 997 Turbo 2007-09 COUPE
Porsche 997 Turbo 2010-13 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751295

The product you are viewing cross references to these numbers

Rear Spoiler Motor.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2006>>
Porsche 996 Carrera 1998-04
Porsche 997 Carrera MKI & MKII 2005>>

Rear Spoiler Switch for RHD Cars



Fits:
Porsche 996 TURBO 2002>> RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99661315610A05

The product you are viewing cross references to these numbers