Bilstein standard
Filter by brand
22-113344KIT
Product Information
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22-113344KIT
The product you are viewing cross references to these numbers
Product Information
Bilstein B4 FRONT Shock Absorbers inc top mounts & fittings. Porsche 996 C4/C4S/TT 1997-05Complete Strut Assembly Kit for Porsche 996 911 (Carrera 4 / 4S / Turbo)
Restore the precise ride quality and confident handling your 996 911 was built for. Over time, struts wear gradually under normal driving conditions, making changes in handling hard to notice until performance declines. This complete strut assembly kit includes nearly everything you need to replace your worn components and bring your suspension back to life.
Each kit includes:
- Front struts
- Strut mounts and bearings
- Bump stops
- Required hardware
With new struts installed, you’ll experience sharper handling, smoother ride quality, reduced braking distances, and more even tire wear.
Note: There are two available spring seat isolator sizes — 3.0mm (99634352500) and 6.5mm (99634352501) — sold separately. Please measure your existing isolator to ensure the correct size for your vehicle.
Additional information:
Coil springs are not included and can be purchased separately if needed.
Original washers and spacers can typically be reused, provided they show no signs of physical damage upon inspection.
Fits:Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22-113344KIT
22-113344
22113344
99634304302
99634304314
99634304317
99634304318
99634304322
99634304324
99634304326
99634304327
99634304329
99634304330
99634304331
99634304339
99634304343
99634304344
99634304346
99634304348
99634304350
99634304351
99634304352
99634304347
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Bilstein B4 FRONT Shock Absorber. Porsche 996 C4/C4S/TT 1997-05 *VNE-B334 (22-113344
2 x Shock absorber strut bellow. Porsche 996 / 997 (99634350901/1
2 x Shock absorber additional spring. Porsche 986 Boxster / 987 Boxster / 987C Cayman / 996 (99634330102/1
2 x Shock absorber angular-contact bearing. Porsche 996 / 997 (99634350100/1
1 x Shock absorber top strut support. Porsche 996 C4 / Turbo (99634301504/1
1 x Shock absorber top strut support. Porsche 996 C4 / Turbo (99634301604/1
6 x Exhaust hexagon nut. Porsche 996 / 997 (90038000501/1
Vehicle Group
Vehicle Group
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Price: €839.12
In Stock - 24 Hour Dispatch
BILSTEIN9964B4
Product Information
Bilstein Replacement for the Original Spec
Cars WITHOUT M030 sport suspension.
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BILSTEIN9964B4
The product you are viewing cross references to these numbers
Product Information
Bilstein Replacement FRONT & REAR Shock Absorber. Bilstein Replacement for the Original Spec
Cars WITHOUT M030 sport suspension.
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BILSTEIN9964B4
22-113344
22113344
24-147644
24147644
99634304317
99634304302
99634304322
99634304313
99634304323
99634304326
99634304329
99633305185
99634304322
99634304344
99634304326
99634304347
99634304329
99634304350
99633305162
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Bilstein B4 FRONT Shock Absorber. Porsche 996 C4/C4S/TT 1997-05 *VNE-B334 (22-113344
2 x Bilstein B4 REAR shock absorber. Porsche 996 C2/C4/TT 1997-05 *VNE-E764 (24-147644
Vehicle Group
Vehicle Group
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
Price: €965.00
In Stock - 24 Hour Dispatch
BILSTEIN9964B4M
Product Information
Bilstein Replacement for the Original Spec
Cars with M030 sport suspension.
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BILSTEIN9964B4M
The product you are viewing cross references to these numbers
Product Information
Bilstein Replacement FRONT & REAR Shock Absorber.Bilstein Replacement for the Original Spec
Cars with M030 sport suspension.
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BILSTEIN9964B4M
22-113344
22113344
99634304317
99634304302
99634304322
99634304313
99634304323
99634304326
99634304329
99634304313
99634304340
99634304322
99634304344
99634304326
99634304347
99634304329
99634304350
24-113359
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Bilstein B4 FRONT Shock Absorber. Porsche 996 C4/C4S/TT 1997-05 *VNE-B334 (22-113344
2 x Bilstein B4 REAR shock absorber. Porsche 996 C2/C4/C4S/TT 1997-05 WITH M030 *VNE-B335 (24-113359
Vehicle Group
Vehicle Group
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Price: €968.36
In Stock - 24 Hour Dispatch
22-113344
Product Information
Bilstein Replacement for the Original Spec
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.
Please Note:
Price is for each damper you will need to buy 2
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
OE spring seat must be used.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22-113344
The product you are viewing cross references to these numbers
Product Information
Bilstein Original Equipment Shock AbsorberBilstein Replacement for the Original Spec
Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.
Please Note:
Price is for each damper you will need to buy 2
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
OE spring seat must be used.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22-113344
22-113344
22113344
99634304302
99634304314
99634304317
99634304318
99634304322
99634304324
99634304326
99634304327
99634304329
99634304330
99634304331
99634304339
99634304343
99634304344
99634304346
99634304348
99634304350
99634304351
99634304352
99634304347
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Price: €225.28
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Express Delivery
DISPLAYING 1 to 4 (of 4 products)
Also found on these pages
About Bilstein standard
Bilstein B4 Shocks: OEM Replacement
The Bilstein B4 is the entry-level option, designed to replicate the performance and feel of the Porsche's original factory suspension.
Features:
Purpose: Direct replacement for OEM shocks or struts.
Design: Twin-tube or monotube design, depending on the application, ensuring compatibility with most factory setups.
Damping Characteristics: Optimized for comfort and everyday driving. Ideal for drivers who want to maintain the original ride quality of their vehicle. Suitable for standard road use, light commuting, and vehicles without performance modifications.
Advantages: Cost-effective and straightforward to install. Provides a comfortable ride comparable to the original factory setup.
You may also like
Popular Models
