Specialist Tools

Heat exchanger pressure tester for Porsche 996/997 Turbo/GT2/GT3



Some GT3 engines are experiencing oil-to-coolant intermixing. While there are potentially several sources of intermixing, faulty engine mounted oil-to-coolant heat exchangers are a major source. Now, with STOMSKI RACING's GT3 Heat Exchanger Tester set, you can confirm if your exchanger is faulty and needs replacing, or whether the source of the contamination is elsewhere. This set of CNC machined gauge blocks is machined from 6061 aluminum for years of service and comes complete with all gauges, seals, valves, and hardware.

Also works on the GT2 and 996/997 TT engines as well.

Heat exchanger tester for Porsche 996 / 997



Some M96/M97 engines are experiencing oil-to-coolant intermixing. While there are potentially several sources of intermixing, faulty engine mounted oil-to-coolant heat exchangers are a major source. Now, with STOMSKI RACING's M96 Heat Exchanger Tester, you can confirm if your exchanger is faulty and needs replacing, or whether the source of the contamination is elsewhere. This high-quality tool is CNC machined from 6061 aluminum, anodized for years of service, and comes complete with all gauges, seals and hardware.

Engine stand for engine mount.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.

Notice: The colour of the part may differ from the colour shown.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6898

The product you are viewing cross references to these numbers

Engine stand for engine mount.



Fits:
Porsche 996/997 Carrera
Porsche 986/987 Boxster
Porsche 987C Cayman
(Not for 911 turbo and GT2/GT3 models)

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using an additionally available bearing block.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6806

The product you are viewing cross references to these numbers

 Engine Timing Kit - for Porsche 996 turbo /  996 GT2 / 997.1 turbo / 997.1 GT2 3.6ltr

This 8230 timing tool kit is designed to lock all 4 camshafts in their timed positions on the Porsche 911 GT2 and 911 Turbo fitted with the 4 cam 3.6L engines. Allows replacement of both cam chains while maintaining engine timing. 

The kit also includes 2 cam chain pre-tensioners

Additional Information
• Applications include: Porsche 996 turbo / GT2 and 997.1 turbo / GT2 (2001 - 2010).
• Engine code applications include: M97/70S, M97/70, M96/70SL and M96/70E.
• Equivalent to OEM 9661, 9661/1 and 9401.
• Use with appropriate DTi (Dial Gauge indicator) and stand to accurately set the camshaft positions - see Laser Part No. 7687.
• Designed to be used in accordance with OEM instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8230

The product you are viewing cross references to these numbers

Engine Timing Tool Kit – Precision Camshaft & Crank Alignment for Porsche M96 & M97 Engines

This Engine Timing Tool Kit provides the essential precision tools required to correctly check and set camshaft and crankshaft timing on a wide range of Porsche models, including the 911 (996 & 997.1), Boxster 986, and 987.1 Boxster / Cayman models using the M96 and M97 engines.

Accurate valve timing is vital for the performance, reliability and safety of these flat-six engines. Even slight misalignment can cause misfires, cam deviation faults, loss of power or—in the worst cases—serious mechanical damage. This professional-grade timing kit ensures perfect alignment during rebuilds, timing chain service, camshaft replacement or diagnostic inspection.

Supplied in a durable storage case, the kit includes equivalents to specialist tools typically referenced under engineering codes 9685, 9686, 9595 and 9595/1.

Fits:

• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005 -08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08

Engine Codes Supported
M96/03, M96/05, M96/23, M96/25, M96/24, M96/26 M97/20, M97/01, M97/21, M97/22

This makes it suitable for a wide range of mid-2000s water-cooled flat-six engines used across several Porsche platforms.

What an Engine Timing Tool Kit Does

A professional timing kit ensures precise and secure alignment of internal engine components by:

• Locking camshafts in the exact timing position
• Holding the crankshaft at top dead centre for correct reference
  
• Allowing accurate valve timing during assembly and inspection
  
• Supporting timing chain and tensioner setup
• Ensuring safe and repeatable timing for diagnostics and rebuilds
• Preventing rotational movement while critical components are serviced

This ensures optimal combustion, smooth running and long-term reliability.

Why Engine Timing Components Fail or Require Adjustment

The M96 and M97 engines are known for timing-related service demands. Common causes for requiring a timing tool kit include:

• Timing chain stretch leading to cam deviation
  
• Worn tensioners or chain guides
• Rebuild procedures requiring camshaft removal
• IMS-related service or bearing replacement
• Incorrect timing after previous repairs
• Top-end overhaul or valve-train replacement

Symptoms can include rough idle, hesitation, fault codes, loss of power or unusual noises.

Why You Should Use Your Timing Tool Kit

Using a precise, high-quality timing tool kit ensures:

• Accurate camshaft and crankshaft alignment
• Correct valve timing for optimal engine performance
• Prevention of piston-to-valve contact
• A faster, more reliable rebuild process
• Professional results consistent with engineering specifications
• Better diagnostic capability for timing-related faults

A worn or incomplete tool kit risks incorrect timing and potentially catastrophic engine damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

C4008

The product you are viewing cross references to these numbers

Engine timing tool kit - for Porsche 997

The 7512 Engine Timing Kit provides the essential tools required to check and set the engine timing on the Porsche 911 (996 3.6 08/2001 to 07/2005, 997 3.6 & 3.8), Boxster 986 (08/2002 to 2011).

Porsche Applications include: 911 (08/2001 to 2008), Boxster (08/2002 to 2011), Cayman (2006 to 2009).
Engine applications: M96/03, M96/05, M96/23, M96/25, M97/20, M96/24, M96/26, M97/01, M97/21, M97/22.
Equivalent to OEM tools 9685, 9686, 9595 & 9595/1.
Use in accordance with OEM instructions
Supplied in a blow mould storage case

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7512

The product you are viewing cross references to these numbers

Exhaust bolt repair kit for all Porsche 996/997 GT3s, GT2s, and TTs.



Avoid the headache of trying to drill out broken exhaust bolts on the GT3 engines.

A CNC milled plate indexes precisely off of the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR068 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR068 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with the supplied M8x1.25 tap.

Kit includes: aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case. Now also includes our SR065D drill guide.

Exhaust bolt repair kit for Boxster / 996 / 997 Carrera & Cayman Gen1 1997- 2009 (Not GT3, GT2 or TT engines)



With more and more broken exhaust bolts reported on the water-cooled engines, the headache of repairing a broken bolt is becoming epidemic. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR067, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR067 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR067 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes : anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

Now also includes our SR065D drill guide.

GT3 cam timing apparatus V2 for Porsche GT3/GT2.



Whether you want to advance or retard cam timing, upgrade cams, or just be able to set with ABSOLUTE precision the cam timing on any of the GT3/GT2 engines, this is the most accurate tool to accomplish those tasks. No need to settle for the "close enough" or in the "ball park" settings accomplished by using the factory tools.
STOMSKI RACING's GT3 Cam Timing Apparatus provides for absolute accuracy, infinite adjustability, and superb flexibility for all cams and setups.
Includes complete fixture with ASME/ANSI certified dial indicators and one (either 12mm or 14mm) TDC Indicator with Travel Gauge (SR092 or SR093). Storage case included.

Heat exchanger adapter for Porsche 996 / 997



The compact, efficient design of the M96/M97 oil-to-coolant heat exchangers has proven itself useful for other than engine cooling. By remotely mounting M96/M97 exchangers, gearbox and/or steering rack temperatures can be reduced and the life of those components significantly extended.

STOMSKI RACING's M96 Heat Exchanger Adapter allows for convenient remote mounting and includes your choice of -6 or -8 AN fittings. This high-quality adapter plate is CNC machined from 6061 aluminum, anodized for years of service, and includes seals and hardware.

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1154

The product you are viewing cross references to these numbers

Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997

Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.

The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.

Anodized Aluminum.

Rear main oil seal fitting tool Porsche Boxster and 911 M96/M97



Fits
Boxster/Cayman 1997-2008
Porsche 911 Carrera 1999-2008 (Excludes Turbo, GT3 and GT2 models)

Description of Tool
This is a 3D Printed tool for installing the Rear Main Seal on Porsche M96/M97 engines to the correct depth without damage to the seal. The tool is 3D printed from hard, black plastic and is very solid and durable. It is aimed at DIYers and hobbyists due to its low cost in comparison to the official Porsche tool, but would be well suited to small independent garages as the tool can be reused many times without damage.

How to use
Care must be taken when using this tool as although it is designed to make the installation of the seal as easy as possible, it is still possible to damage or incorrectly install the seal if care is not taken to install the seal properly. We accept no responsibility for incorrect usage of the tool and possible damage to the seal or engine of the vehicle. We advise you to always confirm with a digital calipers or other measuring device to make sure the seal is installed at the correct depth.
To use this tool you will also need 4 M10 X 75mm bolts and 4 washers. This is to allow for the extra thickness of the tool, and to spread the force from the bolts across the surface of the tool.
The seal must first be correctly orientated and then gently located into the opening around the crankshaft. To do this, leave the blue plastic ring in place and place the seal over the end of the crankshaft. Then push the seal on gently so that the end of the crankshaft pushes the blue ring out of the seal and the seal gets pushed onto the outside of the crankshaft.
Next place the RMS fitting tool over the seal and thread each of the 4 bolts into the crankshaft, through the holes in the tool. Make sure to orientate the tool so that the cut-out for the flywheel guide pin in the crankshaft lines up with the pin. Screw each bolt in slowly until they just about make contact with the face of the tool. From this point on the seal will start to be inserted into the engine.
Turn each bolt a quarter turn at a time, turning all 4 a quarter turn before tightening the first one again, and continuing the cycle. It is very important that the bolts are tightened small amounts, one at a time to make sure that the seal is inserted straight and not at an angle which will damage the seal.
Repeat this until the face of the crankshaft comes into contact with the inner face of the tool and it will not push the seal in any further. Remember that the tool is plastic so excessive force at the point will possibly damage the tool and push the seal in too far.
The 4 bolts can now be unscrewed and fully removed from the crankshaft. The tool can then be removed. It may be a slightly tight fit, and if it is difficult to remove by hand then there are slots in the sides of the tool to allow a screwdriver or prying tool to grip the tool and remove it. If using the slots, be careful to apply even force to both sides to ensure that the tool does not come out at an angle and get stuck or potentially move the seal.
Once the tool and bolts are removed, visually inspect the seal to make sure there is no damage. Then, use a ruler, digital callipers or depth gauge, check the depth of the seal. It should measure 13mm, from the face of the crankshaft to the face of the seal. As long as the tool was used correctly and is suitable for your engine, the seal will be installed at the right depth.
These instructions are only intended as a rough guide, you should always check a workshop manual or research online to ensure the part is being installed correctly. Using this tool requires some practical knowledge so if you are not confident in your abilities please do not attempt to install the seal yourself.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0PB105249

The product you are viewing cross references to these numbers

Rear main oil seal installation tool. 



Fits

Porsche 986 Boxster 2.5lrr / 2.7ltr 
Porsche 986 Boxster S 3.2ltr 
Porsche 987.1 Boxster / Cayman 2.7ltr
Porsche 987.1 Boxster / Cayman 2.9ltr
Porsche 987.1 Boxster S / Cayman S
Porsche 987.1 RS Spyder
Porsche 996 Carrera 2 / Carrera 4
Porsche 996 Carrera 4S
Porsche 997.1 Carrera 2 / Carrera 4
Porsche 997.1 Carrera 2S /Carrera 4S

This special service tool was developed for the correct installation of the rear main oil seal. 
Trying to do this task with any other method is risking engine damage by the way of a damaged rear main seal

German made