Specialist Tools

Camshaft Locking Tool Set – Precision Alignment for Turbo Flat-Four Engines

This camshaft locking tool set is designed exclusively for the Porsche 718 Cayman 2.0ltr and 718 Boxster 2.0ltr turbocharged flat-four engines. Engineered for accuracy and durability, this professional tool kit ensures the camshafts remain securely positioned during timing chain replacement, valve-train repair, cylinder-head servicing, variable valve timing (VVT) calibration, or complete engine rebuild work.

Fits:

• Porsche Boxster 718 2.0L Manual (300 Bhp)
• Porsche Boxster 718 2.0L PDK (300 Bhp)
• Porsche Boxster T 718 2.0L Manual (300 Bhp)
• Porsche Boxster T 718 2.0L PDK (300 Bhp)
• Porsche Cayman 718 2.0L Manual (300Bhp)
• Porsche Cayman 718 2.0L PDK (300Bhp)
• Porsche Cayman T 718 2.0L Manual (300Bhp)
• Porsche Cayman T 718 2.0L PDK (300 Bhp)

With the high-output 2.0-litre turbo engine relying heavily on exact valve timing and precise cam-to-crank synchronisation, even minor timing deviation can cause performance loss, misfires, VVT errors and, in severe cases, internal mechanical failure. This locking tool set is essential for ensuring accurate timing during any major engine service.

What This Camshaft Locking Tool Set Does

This camshaft locking kit is designed to:

• Securely lock both camshafts in position during timing service
  
• Prevent rotational drift when removing or installing timing chains
  
• Ensure exact alignment between camshafts and crankshaft
• Support VVT actuator (cam phaser) installation and calibration
• Enable safe and precise valve-train and timing chain repairs
• Provide repeatable, workshop-grade timing accuracy

Perfect for technicians and rebuilders working on modern Porsche turbo flat-four engines.

Why Timing Systems Fail on the Porsche 718 2.0L Engine

The high-pressure, high-heat environment of modern turbo engines introduces timing-related vulnerabilities, including:

• Timing chain stretch from extended high-load driving
  
• Chain guide wear, causing slack or misalignment
  
• Hydraulic tensioner degradation, especially in high-mileage engines
  
• VVT cam phaser wear, causing timing deviation
  
• Oil contamination impacting chain lubrication and VVT performance
  
• Improper timing during previous repairs, often due to lack of correct tools

Common symptoms include cold-start rattle, loss of boost response, misfires, hesitation, rough idle and camshaft correlation fault codes.

Why You Should Replace or Use a Precision Camshaft Locking Set

Using a properly engineered camshaft timing tool set ensures:

• Accurate camshaft locking and timing chain setup
• Correct VVT phaser positioning for maximised performance
  
• Lower risk of piston-to-valve interference
• Professional standard repairs and rebuilds
• Precision during timing chain and tensioner replacement
• Confidence during high-value engine servicing

This tool set is essential for achieving correct timing on Porsche’s 718 2.0-litre turbo engines.

Coolant Pressure Testing / Purge Cap – Essential Tool for Cooling System Diagnostics & Maintenance

This coolant pressure testing and purge cap is purpose-built for the Porsche 718 Boxster and 718 Cayman, allowing technicians to accurately test, diagnose and bleed the cooling system. It replaces the standard coolant reservoir cap during servicing and enables direct connection to pressure testers, vacuum purge systems and coolant refilling equipment.

The 718’s turbocharged flat-four engine operates under high thermal load, and its cooling system relies on precise pressure levels to maintain performance and prevent overheating. This specialised cap ensures that coolant pressure tests are accurate and reliable, helping technicians detect leaks, verify system integrity and properly purge air after coolant replacement.

What This Coolant Pressure / Purge Cap Does

This tool allows you to:

• Connect a pressure testing system to check for leaks
• Verify pressure stability across hoses, radiators, gaskets and coolant tank
• Support vacuum filling and coolant purging after service
• Identify failing components early, such as water pumps or coolant leaks
• Ensure complete air removal, preventing hot spots and overheating
• Aid in diagnosing coolant loss, pressure drop or overheating problems

It is an essential tool for workshop-level cooling system maintenance on the 718 platform.

Why Coolant Systems Fail on the Porsche 718

The 718 Boxster/Cayman cooling system may develop faults caused by:

• Age-related hose deterioration
• Weak or failing coolant reservoir caps losing pressure
• Small leaks in radiators, water pumps or O-rings
• Air pockets trapped after coolant service
• Thermal expansion stress from spirited driving or track use
• Clogged or restricted coolant passages
• Faulty expansion tank fittings

A pressure test using a proper purge/testing cap is the fastest way to locate these issues before significant engine damage occurs.

Why You Should Use or Replace the Coolant Test/Purge Cap

A high-quality cap ensures:

• Accurate coolant pressure readings
• Fast detection of hidden leaks
• Proper bleeding of the cooling system after service
• Reliable seal under pressure, unlike worn standard caps
• Reduced risk of overheating or coolant boil-over
• Professional-quality servicing for Porsche 718 engines

Replacement is recommended when a cap becomes worn, cracked, or fails to hold pressure during diagnostic procedures.

Oil Filter Removal Tool for Porsche 718 Boxster / 718 Cayman – Precision Tool for Clean & Hassle-Free Oil Changes

This oil filter removal tool is specifically designed for the Porsche 718 Boxster and 718 Cayman, ensuring a perfect fit around the oil filter housing for quick, controlled and damage-free removal during routine servicing. Engineered to match the precise size and profile of the Porsche filter cap, this tool eliminates the risk of slipping, cracking or rounding the housing—common issues when using universal tools.

Whether performing a simple oil change or full engine service, this dedicated tool guarantees efficient removal, cleaner maintenance, and long-term protection for your Porsche’s lubrication system.

What This Oil Filter Removal Tool Does

This precision tool allows you to:

• Firmly grip and remove the oil filter housing without damage
  
• Reduce the risk of oil spills during filter replacement
  
• Maintain correct torque application when reinstalling
  
• Protect the filter cap from distortion or cracking
• Make routine servicing quicker and more efficient
• Ensure a safe, leak-free seal after installation

It is an essential workshop tool for anyone servicing a 718’s turbocharged flat-four engine.

Why Oil Filter Housings Fail

Oil filter housings can wear or become damaged due to:

• Using incorrect, poorly fitting removal tools
• Over-tightening during previous servicing
• Heat and pressure cycles, making housings difficult to remove
  
• Slipping tools, rounding the edges of the cap
  
• Low-quality tools causing cracks or distortion

A damaged filter housing can lead to leaks, contamination, or total failure of the oil filtration system—making proper tools critical.

Why You Should Use or Replace With a Dedicated Oil Filter Removal Tool

A high-quality tool ensures:

• Accurate engagement with the filter housing
• Effortless removal and installation
• Reduced risk of oil system leaks
• Preservation of the housing for future services
• Cleaner, faster and more professional oil changes
• Long-term reliability for Porsche servicing

This is particularly important for the 718 range, where space is limited and access requires precise tooling.

PDK Gearbox Casing Removal Tool Set – Precision Tools for Porsche Dual-Clutch Transmission Disassembly

This PDK gearbox casing removal tool set is designed for professional servicing, disassembly, and repair of Porsche’s advanced PDK dual-clutch transmission. Engineered for precision, strength and reliability, this tool set allows technicians to safely and efficiently separate the transmission casing without damaging mating surfaces, seals, or internal components.

Fits:

• Porsche Boxster 987 MKII 2.9L 2009-2012
• Porsche Boxster S 987 MKII 3.4L 2009-2012
• Porsche Boxster 981 2.7L 2012-16
• Porsche Boxster 981 S / GTS 3.4L 2012-16
• Porsche Boxster 718 2.0L PDK (300 Bhp)
• Porsche Boxster S 718 2.5L PDK (350 Bhp)
• Porsche Boxster T 718 2.0L PDK (300 Bhp)
• Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
• Porsche Boxster Spyder 718 4.0L (420 Bhp)
• Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII Turbo 2010-13
• Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
• Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
• Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
• Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
• Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
• Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
• Porsche 991.1 R 4.0L (500 Bhp) 2016
• Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
• Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
• Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
• Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
• Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
• Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
• Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
• Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
• Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
• Porsche 991.2 Speedster 4.0L (510Bhp) 2019
• Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
• Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
• Porsche Cayman 2.9L 987C MKII 2009-12
• Porsche Cayman S / R 3.4L 987C MKII 2009-12
• Porsche Cayman 2.7L 981 2013-16
• Porsche Cayman S / GTS 3.4L 981 2013-16
• Porsche Cayman 718 2.0L PDK (300Bhp)
• Porsche Cayman S 718 2.5L PDK (350Bhp)
• Porsche Cayman T 718 2.0L PDK (300 Bhp)
• Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
• Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16

The Porsche Doppelkupplungsgetriebe (PDK) uses extremely tight tolerances, pressure-sealed housings and multi-stage clutch assemblies. Removing the gearbox casing requires uniform force, exact tool alignment and controlled removal methods—tasks that cannot safely be performed using improvised tools. This specialised tool set ensures the casing can be removed correctly and damage-free during gearbox rebuilding, clutch pack servicing, mechatronic unit replacement, or general transmission overhaul.

What This PDK Gearbox Casing Removal Tool Set Does

This professional tool kit enables:

• Safe and controlled separation of PDK gearbox halves
• Protection of casing surfaces and internal transmission components
• Even load distribution when lifting or pulling the housing
• Correct alignment when removing clutch housings or mechatronic covers
• Prevention of warping, cracking or seal damage
• Faster, cleaner gearbox teardown for repair or inspection

Essential for technicians performing in-depth PDK drivetrain repairs.

Why PDK Gearbox Casings Are Difficult to Remove

The design of the PDK system makes the casing extremely tight and dependent on precise tooling due to:

• High-pressure sealing surfaces
• Internal pre-loads created by clutch packs and shafts
• Precision dowels and mating surfaces that resist uneven force
• Bonded seals and gaskets requiring controlled removal
• Multi-stage clutch and gear assemblies that cannot tolerate misalignment

Attempting removal without the correct tools risks severe damage to the gearbox.

Why PDK Gearbox Casing Removal Tools Fail

Inferior or worn tools often fail due to:

• Soft metals bending under load
• Incorrect fitment, damaging the transmission housing
• Uneven force application, causing casing distortion
• Tool deformation during high-torque pulling
• Wear and fatigue from repeated workshop use

A failed tool can lead to cracked casings, damaged shafts, or misaligned components.

Why You Should Replace or Use a Dedicated PDK Casing Removal Tool Set

Using a precision tool set designed specifically for PDK transmissions ensures:

• Safe gearbox disassembly without damage
• Correct application of force and alignment
• Faster, more efficient repair procedures
• Prevention of expensive gearbox housing replacement
• Professional results for workshop and rebuild environments
• Long-term durability from high-strength materials

This tool kit is essential for any technician or Porsche specialist working on PDK internals.