Shock Absorber Parts REAR

Rear Shock Absorber Top Mount & Overhaul Kit.
Ensure the rear of your Porsche remains dialled in with this full top-mount overhaul kit for the rear shock/strut assembly. This comprehensive kit includes the upper mount, bearing/bushing, washers and hardware and is designed for direct replacement of worn or fatigued rear mount assemblies.

Fits:

• Porsche Boxster 987 2.7L 2006 -08/08 Cars with PASM
• Porsche Boxster 987 S 3.2/3.4L 2006-08/08 Cars with PASM

Diagram Ref No 2, 3, 4, 5, 7, 8, 9

What This Product Does:

• The top mount supports the top of the shock/strut: it holds it firmly in place while carrying the loads from the damper, spring and suspension movement. It also helps isolate unwanted noise/vibration from the car body.
• Over time the rubber mount may compress, degrade or split; the bearing/bushings may have play; hardware may have fatigue or corrosion. This causes unwanted movement, noise, ride/handling degradation.
• This overhaul kit replaces the mount and all associated hardware so the top of the damper is restored to correct geometry, correct mount stiffness and correct isolation.

Key Symptoms & When You Should Replace:

• Knocking, clunking or popping noises from the rear suspension when going over bumps or during load changes.
• Rear ride quality has deteriorated: more harshness, more vibration, or the rear feels “loose” or vague under cornering.
• Rear tyre wear or handling feel issues which could be caused by mount movement.
• You are already replacing rear shocks/struts or doing significant rear suspension work — this is an ideal time to renew the top mounts as preventative maintenance.
• Mount hardware is visibly degraded, bushings worn, or mount top plate shows signs of fatigue or rust.

Why Replacement Matters:

• Restores rear suspension performance & precision: A worn top mount allows unintended movement under load, which reduces handling precision, tyre contact and can degrade stability — especially important in a performance-oriented car.
  
• Eliminates noise & vibration: A tired mount often produces noise: clunks, creaks or vibrations. A fresh mount kit restores quiet operation.
  
• Prevents further damage: If the mount fails, the extra movement can lead to wear of the damper shaft, spring seat, or even cause damage to the strut tower or body mounting point.
  
• Efficient maintenance: Since access to the top mount is easiest when the rear damper is out or suspension is disassembled, doing the full kit replacement while you’re doing other rear suspension work is cost-effective.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT987-RR-2

The product you are viewing cross references to these numbers

Rear Shock Absorber Top Mount & Overhaul Kit.
Ensure the rear of your Porsche remains dialled in with this full top-mount overhaul kit for the rear shock/strut assembly. This comprehensive kit includes the upper mount, bearing/bushing, washers and hardware and is designed for direct replacement of worn or fatigued rear mount assemblies.

Fits:

• Porsche Boxster 987 2.7L 2006 -08/08 Cars without PASM
• Porsche Boxster 987 S 3.2/3.4L 2006-08/08 Cars without PASM

Diagram Ref No 2, 3, 4, 5, 7, 8, 9

What This Product Does:

• The top mount supports the top of the shock/strut: it holds it firmly in place while carrying the loads from the damper, spring and suspension movement. It also helps isolate unwanted noise/vibration from the car body.
• Over time the rubber mount may compress, degrade or split; the bearing/bushings may have play; hardware may have fatigue or corrosion. This causes unwanted movement, noise, ride/handling degradation.
• This overhaul kit replaces the mount and all associated hardware so the top of the damper is restored to correct geometry, correct mount stiffness and correct isolation.

Key Symptoms & When You Should Replace:

• Knocking, clunking or popping noises from the rear suspension when going over bumps or during load changes.
• Rear ride quality has deteriorated: more harshness, more vibration, or the rear feels “loose” or vague under cornering.
• Rear tyre wear or handling feel issues which could be caused by mount movement.
• You are already replacing rear shocks/struts or doing significant rear suspension work — this is an ideal time to renew the top mounts as preventative maintenance.
• Mount hardware is visibly degraded, bushings worn, or mount top plate shows signs of fatigue or rust.

Why Replacement Matters:

• Restores rear suspension performance & precision: A worn top mount allows unintended movement under load, which reduces handling precision, tyre contact and can degrade stability — especially important in a performance-oriented car.
  
• Eliminates noise & vibration: A tired mount often produces noise: clunks, creaks or vibrations. A fresh mount kit restores quiet operation.
  
• Prevents further damage: If the mount fails, the extra movement can lead to wear of the damper shaft, spring seat, or even cause damage to the strut tower or body mounting point.
  
• Efficient maintenance: Since access to the top mount is easiest when the rear damper is out or suspension is disassembled, doing the full kit replacement while you’re doing other rear suspension work is cost-effective.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT987-RR-1

The product you are viewing cross references to these numbers

Refresh your 987-1 Boxster's rear suspension with this comprehensive kit, including new standard replacement shock absorbers, coil springs, top mounts, dust covers, bump stops, and essential fasteners. 

Suitable for 'S' models equipped with a 6-speed manual transmission (PR 480) and without sports suspension/PASM (PR 475).


Porsche 987-1 Boxster S 3.4L 2006-08

Kit Contents:
2x Bilstein B4 Shock Absorbers (Standard Replacement)
2x OE Match Coil Springs (Standard Replacement)
2x OE Match Top Mounts

6x OE Match M8 Lock Nuts for Top Mounts
2x OE Match Shock Absorber Compensating Plate (3mm)
4x OE Match Upper & Lower Stop Plates / Washers
1x OE Match Bump Stop & Dust Cover Kit
2x Genuine Porsche Shock Absorber Compensating Plate (6mm)
2x Genuine Porsche Coil Spring Support Ring
2x Genuine Porsche M14 x 1.5 Nuts for Shock Absorber

NOTE: This kit is not suitable for 2005 Boxster S 3.2L models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

REARSUSPENSIONKIT987-1

The product you are viewing cross references to these numbers

Shock absorber supporting mounts, rear.
SET OF 2



Fits:

Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733305900

The product you are viewing cross references to these numbers