Brake Pads & Disc Package

Front Brake Disc & Brake Pad Package 

Restore the braking confidence of your Porsche with this Front Brake Disc & Brake Pad Package. Combining premium-quality replacement components in one convenient package, this kit provides everything required to complete a comprehensive front brake service.

Fits:

• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 GTS 3.0L 2020-24
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>

The package includes:

• 2 x SHW 408x36mm Front Brake Discs (left and right)
• 1 x Set of ABS Front Brake Pads
• 2 x Brake Pad Wear Warning Wires

SHW brake discs are manufactured to original equipment standards, offering precise machining, excellent balance and superb heat management. Paired with high-quality ABS brake pads, this package delivers dependable braking performance, progressive pedal feel and excellent value for everyday road use and enthusiastic driving alike.

Replacing all the major wear components together ensures maximum braking efficiency while saving both time and future labour costs.

What Does This Brake Kit Do?

Your Porsche's front braking system converts the vehicle's momentum into heat, allowing it to slow down safely and consistently.

Within this kit:

• SHW brake discs provide the precision-machined friction surface.
  
• ABS brake pads clamp against the discs to convert kinetic energy into heat, slowing the vehicle safely.        
• Brake wear warning wires continuously monitor pad wear and alert you when replacement is required.

Working together, these components ensure predictable braking performance, excellent pedal response and maximum driver confidence.

Why Do Brake Components Wear?

Brakes are consumable components and gradually wear every time the vehicle is driven.

The most common causes include:

• Everyday braking
• High-speed driving
• Repeated heavy braking
• Heat generated under demanding conditions
• Stop-start traffic
• Natural wear of friction materials

As the pads wear thinner, the brake discs also lose material. Eventually both components fall below their service limits and should be renewed.

Why Replace the Complete Kit?

Installing new brake discs without replacing worn pads—or vice versa—can compromise braking performance and shorten component life.

Replacing the complete package offers several advantages:

• Restores factory braking performance
• Ensures correct bedding-in of new components
• Reduces the likelihood of brake vibration
• Prevents uneven pad or disc wear
• Replaces worn brake wear sensors
• Improves braking consistency and pedal feel
• Minimises repeat workshop labour

Replacing all front braking wear components together is the most effective way to maintain optimum braking performance.

When Should the Kit Be Replaced?

A complete replacement is recommended when:

• Brake pads reach the minimum wear limit
• Brake wear warning lights illuminate
• Brake discs are below the minimum thickness
• Disc faces become heavily scored or heat marked
• Brake judder develops under braking
• Braking distances increase
• A scheduled brake service is due

Routine inspection and timely replacement help maintain the braking performance and safety expected from every Porsche.

Porsche 992 GTS Front Brake Service Kits

Regular brake servicing is essential for maintaining the performance, safety and driving enjoyment of your Porsche. Replacing the brake discs, pads and wear sensors together ensures all components wear evenly, helping to deliver smooth braking, reduced noise and optimum pedal feel.

This package combines SHW's original equipment-quality brake discs with Textar brake pads, one of Europe's most respected OE friction material manufacturers. Together they provide reliable braking performance, excellent durability and the consistent stopping power demanded by high-performance Porsche models.

Whether you're carrying out routine maintenance or refreshing the braking system after years of service, this complete package provides an efficient and cost-effective solution.

Benefits of This Brake Package

• Complete front brake overhaul in one kit
• Premium SHW brake discs
• Quality ABS brake pads
• Includes new brake wear sensors
• Consistent, predictable braking
• Smooth pedal response
• Reduced installation time
• Excellent value compared with purchasing components separately

Front Brake Disc & Brake Pad Package 

Maintain the outstanding braking performance of your Porsche with this complete Front Brake Disc & Brake Pad Package, designed specifically for the Porsche 992.1 GTS and 992.2 GTS.

Fits:

• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 GTS 3.0L 2020-24
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>

This premium service kit includes everything required to restore the front braking system to optimum condition:

• 2 x SHW 408x36mm Front Brake Discs (left and right)
  
• 1 x Set of Brembo Front Brake Pads
• 2 x Brake Pad Wear Warning Wires

Combining OE-quality SHW brake discs with Brembo's premium friction material, this package delivers exceptional stopping power, consistent pedal feel and outstanding thermal stability. By replacing the discs, brake pads and wear sensors together, you ensure every braking component works as intended, providing maximum safety, performance and service life.

Ideal for routine servicing or replacing worn braking components, this package offers excellent value while maintaining the braking characteristics expected from the Porsche 992 GTS.

What Do Brake Discs, Pads & Warning Wires Do?

The front braking system works as a complete assembly to safely slow and stop your Porsche.

• Brake discs provide the friction surface against which the brake pads operate.
  
• Brake pads clamp onto the discs, converting vehicle speed into heat through friction.
  
• Brake wear warning wires monitor pad thickness and illuminate the dashboard warning when replacement is required.

Together, these components deliver precise braking performance, consistent pedal feel and the stopping power expected from a high-performance Porsche.

Why Do They Wear Out?

Brake components are designed to wear as part of normal operation.

Common causes include:

• Frequent heavy braking
• Spirited road driving
• Track use
• High operating temperatures
• Stop-start traffic
• Natural friction material wear

As the pads wear, they gradually wear the brake disc surface. Replacing only one component can accelerate wear of the other, making a complete brake service the preferred solution.

Why Replace Them as a Complete Kit?

Replacing discs, pads and warning wires together provides several important benefits:

• Ensures new pads bed correctly onto fresh disc surfaces
• Delivers optimum braking performance
• Prevents uneven brake wear
• Eliminates brake judder caused by worn discs
• Replaces worn brake wear sensors at the same time
• Reduces future labour costs
• Restores factory braking feel and performance

A complete brake overhaul is the best way to maintain safe, predictable braking while maximising the lifespan of every component.

When Should This Kit Be Replaced?

Replacement is recommended when:

• Brake pads reach their minimum thickness
• The brake wear warning light illuminates
• Brake discs are below the minimum thickness specification
• Disc surfaces become heavily scored or heat cracked
• Brake vibration or judder develops
• Braking performance begins to decline
• Scheduled maintenance recommends replacement

Replacing all front braking components together helps ensure the braking system performs exactly as Porsche intended.

Porsche 992 GTS Brake Service Kits

Keeping your Porsche's braking system in peak condition is essential for both performance and safety. Replacing brake discs and pads together ensures the friction surfaces wear evenly, improves pedal feel and restores the stopping power expected from the 992 GTS.

SHW brake discs are renowned for their precision engineering, excellent heat management and OE-quality manufacturing, while Brembo brake pads deliver consistent friction characteristics and exceptional braking confidence. Combined with new brake wear sensors, this complete package provides everything needed for a professional front brake service.

Whether your Porsche is used for daily driving, spirited weekend runs or fast road touring, replacing the braking system as a complete package ensures maximum reliability and long-term value.

Benefits of This Brake Package

• Complete front brake service solution
• Premium SHW brake discs
• High-performance
• Brembo brake pads
• New brake pad warning wires included
• Restores factory braking performance
• Improves pedal feel and braking consistency
• Reduces the risk of uneven brake wear
• Excellent value compared with purchasing components separately       

Front Brake Disc & Brake Pad Package 

Keep your Porsche braking exactly as intended with this complete Front Brake Disc & Brake Pad Package. Combining premium OE-quality components, this package provides everything required to carry out a complete front brake service in one convenient kit.

Fits:

• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
• Porsche 992.1 Targa 4 GTS 3.0L 2020-24
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>

The package includes:

• 2 x SHW 408x36mm Front Brake Discs (left and right)
• 1 x Set of Textar Front Brake Pads
• 2 x Brake Pad Wear Warning Wires

SHW is one of Europe's leading original equipment brake disc manufacturers, producing high-quality discs with excellent thermal stability and precise machining. Combined with OE-quality Textar brake pads, renowned for their smooth pedal feel, low noise and dependable braking performance, this kit restores the confidence and stopping power expected from a Porsche GTS.

Replacing all the major wear components together ensures maximum braking efficiency while saving both time and future labour costs.

What Does This Brake Kit Do?

Your Porsche's front braking system converts the vehicle's momentum into heat, allowing it to slow down safely and consistently.

Within this kit:

• SHW brake discs provide the precision-machined friction surface.
  
• Textar brake pads generate the braking force by gripping the discs.
  
• Brake wear warning wires continuously monitor pad wear and alert you when replacement is required.

Working together, these components ensure predictable braking performance, excellent pedal response and maximum driver confidence.

Why Do Brake Components Wear?

Brakes are consumable components and gradually wear every time the vehicle is driven.

The most common causes include:

• Everyday braking
• High-speed driving
• Repeated heavy braking
• Heat generated under demanding conditions
• Stop-start traffic
• Natural wear of friction materials

As the pads wear thinner, the brake discs also lose material. Eventually both components fall below their service limits and should be renewed.

Why Replace the Complete Kit?

Installing new brake discs without replacing worn pads—or vice versa—can compromise braking performance and shorten component life.

Replacing the complete package offers several advantages:

• Restores factory braking performance
• Ensures correct bedding-in of new components
• Reduces the likelihood of brake vibration
• Prevents uneven pad or disc wear
• Replaces worn brake wear sensors
• Improves braking consistency and pedal feel
• Minimises repeat workshop labour

Replacing all front braking wear components together is the most effective way to maintain optimum braking performance.

When Should the Kit Be Replaced?

A complete replacement is recommended when:

• Brake pads reach the minimum wear limit
• Brake wear warning lights illuminate
• Brake discs are below the minimum thickness
• Disc faces become heavily scored or heat marked
• Brake judder develops under braking
• Braking distances increase
• A scheduled brake service is due

Routine inspection and timely replacement help maintain the braking performance and safety expected from every Porsche.

Porsche 992 GTS Front Brake Service Kits

Regular brake servicing is essential for maintaining the performance, safety and driving enjoyment of your Porsche. Replacing the brake discs, pads and wear sensors together ensures all components wear evenly, helping to deliver smooth braking, reduced noise and optimum pedal feel.

This package combines SHW's original equipment-quality brake discs with Textar brake pads, one of Europe's most respected OE friction material manufacturers. Together they provide reliable braking performance, excellent durability and the consistent stopping power demanded by high-performance Porsche models.

Whether you're carrying out routine maintenance or refreshing the braking system after years of service, this complete package provides an efficient and cost-effective solution.

Benefits of This Brake Package

• Complete front brake overhaul in one kit
• Premium SHW brake discs
• OE-quality Textar brake pads
• Includes new brake wear sensors
• Consistent, predictable braking
• Smooth pedal response
• Reduced installation time
• Excellent value compared with purchasing components separately

ABS Front Brake Disc & Pads Package 

Restore the outstanding braking performance of your Porsche with this ABS Front Brake Disc & Pads Package, designed specifically for the Porsche 992.2 Carrera 3.0ltr. This complete front brake service kit contains 2 x ABS Front Brake Discs, 1 x ABS Front Brake Pad Set and 2 x Front Brake Pad Warning Wires, providing everything required to carry out a professional front brake overhaul.

Fits:

• Porsche 992.1 Targa 4 3.0L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>

Replacing the discs, brake pads and brake pad wear sensors together ensures all components wear evenly, preventing premature wear while maintaining optimum braking efficiency.

Kit Contents

This complete front brake service package includes:

• 2 x ABS Front Brake Discs
• 1 x ABS Front Brake Pad Set
• 2 x Front Brake Pad Warning Wires

Everything required to complete a full front brake service in one convenient package.

What Do the Front Brake Discs, Pads & Warning Wires Do?

Each component performs an essential role in your Porsche's braking system:

Front Brake Discs
The brake discs rotate with the wheels and provide the friction surface that allows the brake pads to slow and stop the vehicle while efficiently dissipating heat.

Front Brake Pads
The brake pads clamp against the brake discs when the brake pedal is applied, converting kinetic energy into heat to deliver powerful, controlled braking.

Brake Pad Warning Wires
The brake wear sensors monitor brake pad thickness and illuminate the dashboard warning light when the pads have reached their minimum safe operating thickness, helping prevent unnecessary damage to the brake discs.

Working together, these components provide the braking performance, safety and confidence expected from the Porsche 992.2 Carrera.

Why Do Brake Components Fail?

Brake components are designed to wear during normal use. Common causes of replacement include:

• Normal friction wear of brake pads.
• Brake disc wear and reduction in thickness.
• Heat build-up from repeated heavy braking.
• Brake disc scoring or cracking.
• Pad glazing caused by excessive temperatures.
• Corrosion on brake disc surfaces.
• Activated or damaged brake pad warning wires.

Driving style, mileage, road conditions and vehicle use all influence brake component lifespan.

Why Should They Be Replaced as a Complete Kit?

Replacing the discs, pads and warning wires together offers several important benefits:

• Ensures even bedding-in of new components.
• Maximises braking performance.
• Prevents accelerated wear caused by mixing old and new parts.
• Eliminates brake warning light issues with new sensors.
• Reduces future labour costs.
• Restores factory braking performance and pedal feel.
• Provides the safest and most reliable braking solution.

Replacing only one component can compromise braking efficiency and shorten the lifespan of newly installed parts.

When Should the Kit Be Replaced?

A complete front brake service is recommended if you notice:

• Brake pad warning light illuminated.
• Brake discs below the minimum thickness specification.
• Excessive disc scoring or lip formation.
• Brake vibration or steering wheel judder.
• Reduced braking performance.
• Brake squeal or grinding noises.
• During scheduled brake maintenance.

Always inspect both the brake discs and pads together during servicing.

Premium Quality Components

This Front Brake Package provides:

• OE-quality brake discs.
• High-performance front brake pads.
• Two new brake pad warning wires.
• Direct-fit replacement components.
• Excellent braking performance.
• Smooth, quiet operation.
• Reliable stopping power for everyday and spirited driving.       

Front Brake Disc & Pads Package 

Keep your Porsche braking exactly as its engineers intended with this Front Brake Disc & Pads Package, designed specifically for the Porsche 992.2 Carrera 3.0ltr. This complete service kit contains all the essential wear components required to carry out a professional front brake overhaul, restoring braking performance, safety and pedal feel.

Fits:

• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>

Replacing the discs, brake pads and brake pad wear sensors together ensures all components wear evenly, preventing premature wear while maintaining optimum braking efficiency.

Kit Contents

This complete front brake service package includes:

• 2 x Front Brake Discs
• 1 x Front Brake Pad Set
• 2 x Front Brake Pad Warning Wires

Everything required to complete a full front brake service in one convenient package.

What Do the Front Brake Discs, Pads & Warning Wires Do?

Each component performs an essential role in your Porsche's braking system:

Front Brake Discs
The brake discs rotate with the wheels and provide the friction surface that allows the brake pads to slow and stop the vehicle while efficiently dissipating heat.

Front Brake Pads
The brake pads clamp against the brake discs when the brake pedal is applied, converting kinetic energy into heat to deliver powerful, controlled braking.

Brake Pad Warning Wires
The brake wear sensors monitor brake pad thickness and illuminate the dashboard warning light when the pads have reached their minimum safe operating thickness, helping prevent unnecessary damage to the brake discs.

Working together, these components provide the braking performance, safety and confidence expected from the Porsche 992.2 Carrera.

Why Do Brake Components Fail?

Brake components are designed to wear during normal use. Common causes of replacement include:

• Normal friction wear of brake pads.
• Brake disc wear and reduction in thickness.
• Heat build-up from repeated heavy braking.
• Brake disc scoring or cracking.
• Pad glazing caused by excessive temperatures.
• Corrosion on brake disc surfaces.
• Activated or damaged brake pad warning wires.

Driving style, mileage, road conditions and vehicle use all influence brake component lifespan.

Why Should They Be Replaced as a Complete Kit?

Replacing the discs, pads and warning wires together offers several important benefits:

• Ensures even bedding-in of new components.
• Maximises braking performance.
• Prevents accelerated wear caused by mixing old and new parts.
• Eliminates brake warning light issues with new sensors.
• Reduces future labour costs.
• Restores factory braking performance and pedal feel.
• Provides the safest and most reliable braking solution.

Replacing only one component can compromise braking efficiency and shorten the lifespan of newly installed parts.

When Should the Kit Be Replaced?

A complete front brake service is recommended if you notice:

• Brake pad warning light illuminated.
• Brake discs below the minimum thickness specification.
• Excessive disc scoring or lip formation.
• Brake vibration or steering wheel judder.
• Reduced braking performance.
• Brake squeal or grinding noises.
• During scheduled brake maintenance.

Always inspect both the brake discs and pads together during servicing.

Premium Quality Components

This Front Brake Package provides:

• OE-quality brake discs.
• High-performance front brake pads.
• Two new brake pad warning wires.
• Direct-fit replacement components.
• Excellent braking performance.
• Smooth, quiet operation.
• Reliable stopping power for everyday and spirited driving.       

Front Brake Disc & Pads Package 

Upgrade your Porsche's braking performance with this Zimmermann Formula Z Front Brake Disc & Pads Package, developed specifically for the Porsche 992.2 Carrera 3.0L. This premium brake service kit combines Zimmermann Formula Z high-performance front brake discs, Zimmermann front brake pads and two new brake pad warning wires, providing everything required to restore precise braking performance, exceptional pedal feel and maximum safety.

Fits:

• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>

Designed for fast road driving and everyday use, Zimmermann Formula Z components offer OE-quality fitment with enhanced durability, excellent heat management and consistent stopping performance.

Kit Contents

This complete front brake package includes:

• 2 x Zimmermann Formula Z Front Brake Discs
• 1 x Zimmermann Front Brake Pad Set
• 2 x Front Brake Pad Warning Wires

Everything required to complete a professional front brake service.

What Do the Components Do?

Zimmermann Formula Z Front Brake Discs
Zimmermann Formula Z brake discs provide the braking surface that the pads clamp against to safely slow the vehicle. Manufactured from premium high-carbon cast iron, they offer excellent thermal stability, reduced brake fade and superior resistance to distortion under demanding driving conditions. Their advanced design promotes efficient heat dissipation for consistent braking performance.

Zimmermann Front Brake Pads
Zimmermann brake pads are engineered to work perfectly with Formula Z discs, delivering excellent friction characteristics, progressive pedal feel and low noise. Their advanced friction material provides strong stopping power while helping minimise brake dust and maintaining excellent disc compatibility.

Brake Pad Warning Wires
The brake pad wear sensors monitor the thickness of the brake pads and illuminate the dashboard brake warning light when the pads have reached their minimum service limit. Replacing the warning wires with every brake service ensures accurate brake wear monitoring and eliminates warning light issues.

Together, these premium components deliver outstanding braking confidence and help maintain the exceptional driving dynamics of the Porsche 992.2 Carrera.

Why Do Brake Components Wear Out?

Brake components are designed to wear as part of normal vehicle operation. Common causes include:

• Continuous friction between pads and discs.
• High operating temperatures generated during braking.
• Repeated heavy braking.
• Brake disc wear below the minimum thickness.
• Disc scoring or surface cracking.
• Pad glazing through excessive heat.
• Corrosion during prolonged vehicle storage.
• Activated or damaged brake wear sensors.

Vehicle weight, driving style and road conditions all affect brake component lifespan.

Why Replace the Complete Kit?

Replacing the brake discs, pads and warning wires together provides several important advantages:

• Ensures perfect bedding-in between new discs and pads.
• Restores maximum braking efficiency.
• Improves brake pedal feel and modulation.
• Prevents uneven wear caused by fitting new pads to worn discs.
• Eliminates brake warning light issues with new sensors.
• Reduces future labour costs.
• Maximises the lifespan of every braking component.
• Restores factory-level braking safety and performance.

Replacing only individual components can reduce braking performance and shorten the service life of newly installed parts.

When Should the Kit Be Replaced?

A complete front brake service is recommended when:

• The brake pad warning light is illuminated.
• Brake discs have reached the minimum thickness.
• Excessive scoring or lips develop on the discs.
• Brake vibration or steering wheel judder occurs.
• Braking performance has noticeably reduced.
• Brake squeal or grinding noises are present.
• During scheduled brake servicing.

Routine inspection of the complete braking system helps maintain safe, reliable braking performance.

Zimmermann Formula Z Performance

This premium brake package provides:

• Genuine Zimmermann Formula Z high-performance brake discs.
• Zimmermann premium front brake pads.
• Two new brake pad warning wires.
• OE-quality direct replacement fitment.
• Excellent heat dissipation.
• Reduced brake fade. Smooth, progressive pedal feel.
• Outstanding braking performance for everyday and spirited road driving.       

Front carbon-ceramic brake disc and brake pad package by Ninemeister for Porsche 992.2 Carrera 2S, Carrera 2 GTS and Carrera 4 GTS models from 2024 onwards. It combines two-piece floating front discs with a compatible low-metallic road pad compound.

Fits

• 992.2 Carrera 2S 3.0L 2024>>
• 992.2 Carrera 2 GTS 3.6L 2024>>
• 992.2 Carrera 4 GTS 3.6L 2024>>
  
  

What This Product Does

This package provides matched front carbon-ceramic friction components for replacing worn or damaged discs and pads. The discs are designed as direct replacements for the OEM PCCB carbon-ceramic system with option code M450, while Ninemeister also identifies the discs as suitable steel-disc replacements. The included pad specification is intended solely for use with carbon-ceramic brake discs.

Functions

• Renews the front brake disc and pad friction surfaces together.
• Provides a compatible road pad compound for carbon-ceramic discs.
• Supports consistent low-to-medium friction characteristics.
• Reduces unsprung weight compared with conventional cast-iron discs.
• Uses a floating two-piece construction to accommodate repeated thermal cycles.
• Produces less brake dust than a typical cast-iron disc and pad combination.

Technical Details

• Front disc dimensions: 410 × 36 mm.
• Two-piece floating carbon-ceramic disc construction.
• Carbon-fibre long-strand material reinforced with silicon carbide.
• CNC-machined 7075-T6 billet aluminium centre bells with a hard-anodised finish.
• Manufacturer-stated disc weight: 7 kg.
• Road pads use a low-metallic, resin-bonded material containing steel and aramid fibres.

Symptoms of Fault

• Brake judder or vibration through the pedal or steering wheel.
• Reduced initial brake response or an inconsistent pedal feel.
• Visible disc chipping, cracking or surface deterioration.
• Brake pads approaching their wear limit.
• Unusual squealing, scraping or grinding noises.
• Uneven wear across the front brake components.

Why Replacement Matters

Carbon-ceramic discs and their matching pads should be inspected as a complete friction system. Renewing compatible discs and pads together helps avoid mixing unsuitable compounds and provides a consistent maintenance baseline across the front axle. Calipers, wear sensors, hoses and fitting hardware should also be inspected before installation. Follow the brake component manufacturer’s bedding-in procedure after fitting.

FAQs

• Are the pads compatible with iron brake discs?
  No. Ninemeister specifies these road pads for carbon-ceramic brake discs only.
• What size are the front discs?
  Each disc specification is 410 × 36 mm.
• Does this package replace the original PCCB system?
  The discs are identified as direct replacements for OEM PCCB front discs with option code M450.
• Are wear sensors and fitting hardware included?
  These items are not specified, so compare the package contents with the vehicle and planned installation before work begins.
• Should the brakes be bedded in?
  Yes. Use the procedure supplied for the discs and pad compound and avoid heavy braking until bedding-in is complete.

SHW Rear Brake Disc & Brembo Brake Pad Package

Restore your Porsche's braking performance with this SHW Rear Brake Disc & Brembo Brake Pad Package, engineered specifically for the Porsche 992.2 Carrera 2 3.0L. This complete rear brake service kit includes 2 x SHW Rear Brake Discs, 1 x Brembo Rear Brake Pad Set and 2 x Rear Brake Pad Warning Wires, providing everything required to carry out a comprehensive rear brake overhaul.

Fits:

• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>

Combining SHW original equipment-quality brake discs with Brembo premium rear brake pads, this package delivers exceptional braking performance, excellent thermal stability and outstanding durability. Replacing the complete kit ensures all wear components work together correctly, restoring factory braking performance while reducing future maintenance costs.

Kit Contents

This complete rear brake service package includes:

• 2 x SHW Rear Brake Discs
• 1 x Brembo Rear Brake Pad Set
• 2 x Rear Brake Pad Warning Wires

Everything required to complete a professional rear brake service.

What Do the Components Do?

SHW Rear Brake Discs
The rear brake discs provide the braking surface that the brake pads clamp against during braking. Manufactured using premium high-carbon cast iron, SHW brake discs deliver excellent heat dissipation, superior resistance to thermal distortion and consistent braking performance. They also play an important role in maintaining braking balance and vehicle stability.

Brembo Rear Brake Pad Set
Brembo rear brake pads use advanced friction materials to provide smooth, progressive braking with excellent stopping power. Designed to work perfectly with SHW brake discs, they offer low noise, reduced brake dust and outstanding wear characteristics while maintaining OE-quality braking performance.

Rear Brake Pad Warning Wires
The rear brake pad warning wires monitor the remaining brake pad thickness. When the friction material reaches its minimum safe limit, the sensor activates the dashboard brake warning light, allowing the pads to be replaced before excessive wear damages the brake discs.

Together, these premium components deliver the precise braking control, safety and reliability expected from the Porsche 992.2 Carrera.

Why Do Brake Components Wear Out?

Brake discs, brake pads and warning sensors are all consumable service components that naturally wear during normal use. Common causes include:

• Continuous friction between brake pads and discs.
• High temperatures generated during braking.
• Repeated braking during everyday driving.
• Natural reduction in brake disc thickness.
• Brake pad friction material wearing away.
• Heat cycling causing disc distortion or pad glazing.
• Surface corrosion during prolonged periods of inactivity.
• Activation of brake pad warning sensors when pad wear limits are reached.

Driving style, mileage and operating conditions all affect brake component lifespan.

Why Replace the Complete Kit?

Replacing the complete brake package provides several important benefits:

• Restores factory braking performance.
• Ensures correct bedding-in between new brake discs and pads.
• Eliminates uneven wear between old and new components.
• Replaces worn brake pad warning sensors.
• Improves brake pedal feel and braking consistency.
• Reduces the risk of vibration, noise and premature wear.
• Maximises the lifespan of all braking components.
• Reduces future labour costs by replacing every service item together.

Replacing only individual components can compromise braking performance and shorten the life of newly fitted parts.

When Should the Kit Be Replaced?

A complete rear brake service is recommended if you notice:

• Rear brake warning light illuminated.
• Brake discs below the manufacturer's minimum thickness.
• Heavy scoring or grooves on the braking surface.
• Brake vibration or pulsation.
• Squealing or grinding noises.
• Reduced braking performance.
• Heat cracks or excessive corrosion.
• During routine scheduled brake servicing.

For optimum safety and performance, Porsche specialists recommend replacing brake discs, brake pads and warning wires together.

Zimmermann Coat Z Rear Brake Disc & ABS Brake Pad Package 

Restore your Porsche's braking performance with this Zimmermann Coat Z Rear Brake Disc & ABS Brake Pad Package, developed specifically for the Porsche 992.2 Carrera 2 3.0L. This complete rear brake service kit includes 2 x Zimmermann Coat Z Rear Brake Discs, 1 x ABS Rear Brake Pad Set and 2 x Rear Brake Pad Warning Wires, providing everything required to carry out a professional rear brake overhaul.

Fits:

• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
  
  

Featuring Zimmermann's premium Coat Z anti-corrosion coated brake discs, combined with ABS OE-quality rear brake pads, this package delivers excellent stopping performance, outstanding corrosion resistance and long-lasting reliability. Replacing all braking wear components together restores factory braking performance while helping maximise the service life of your braking system.

Kit Contents

This complete rear brake service package includes:

• 2 x Zimmermann Coat Z Rear Brake Discs  
• 1 x ABS Rear Brake Pad Set
• 2 x Rear Brake Pad Warning Wires

Everything required to complete a professional rear brake service.

What Do the Components Do?

Zimmermann Coat Z Rear Brake Discs
The rear brake discs provide the precision-machined friction surface that the brake pads clamp against during braking. Zimmermann Coat Z brake discs feature a durable anti-corrosion coating that protects the non-friction surfaces from rust while maintaining the clean appearance of the braking system behind open alloy wheels. Manufactured to OE specifications, they offer excellent heat dissipation, smooth braking performance and outstanding durability.

ABS Rear Brake Pad Set
ABS rear brake pads are manufactured using premium friction materials to provide dependable stopping power, smooth pedal feel and low-noise operation. Designed to work seamlessly with Zimmermann brake discs, they deliver consistent braking performance while minimising wear and ensuring excellent compatibility with the original Porsche braking system.

Rear Brake Pad Warning Wires
The rear brake pad warning wires monitor the remaining brake pad thickness. When the friction material reaches its minimum safe limit, the sensor activates the dashboard brake warning light, allowing the pads to be replaced before excessive wear damages the brake discs.

Together, these premium components deliver the precise braking control, safety and reliability expected from the Porsche 992.2 Carrera.

Why Do Brake Components Wear Out?

Brake discs, brake pads and warning sensors are all consumable service components that naturally wear during normal use. Common causes include:

• Continuous friction between brake pads and discs.
• High temperatures generated during braking.
• Repeated braking during everyday driving.
• Natural reduction in brake disc thickness.
• Brake pad friction material wearing away.
• Heat cycling causing disc distortion or pad glazing.
• Surface corrosion during prolonged periods of inactivity.
• Activation of brake pad warning sensors when pad wear limits are reached.

Driving style, mileage and operating conditions all affect brake component lifespan.

Why Replace the Complete Kit?

Replacing the complete brake package provides several important benefits:

• Restores factory braking performance.
• Ensures correct bedding-in between new brake discs and pads.
• Eliminates uneven wear between old and new components.
• Replaces worn brake pad warning sensors.
• Improves brake pedal feel and braking consistency.
• Reduces the risk of vibration, noise and premature wear.
• Maximises the lifespan of all braking components.
• Reduces future labour costs by replacing every service item together.

Replacing only individual components can compromise braking performance and shorten the life of newly fitted parts.

When Should the Kit Be Replaced?

A complete rear brake service is recommended if you notice:

• Rear brake warning light illuminated.
• Brake discs below the manufacturer's minimum thickness.
• Heavy scoring or grooves on the braking surface.
• Brake vibration or pulsation.
• Squealing or grinding noises.
• Reduced braking performance.
• Heat cracks or excessive corrosion.
• During routine scheduled brake servicing.

For optimum safety and performance, Porsche specialists recommend replacing brake discs, brake pads and warning wires together.

Rear Carbon-Ceramic Brake Disc & Pad Package by Ninemeister for Porsche 992.2 Carrera S and GTS models from 2024 onwards. This matched rear-axle package combines two-piece floating carbon-ceramic brake discs with road-compound pads developed specifically for use against carbon-ceramic friction surfaces.

Fits

• Porsche 992.2 Carrera 2S 3.0L 2024>>
• Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
• Porsche 992.2 Carrera 4 GTS 3.6L 2024>>

What This Product Does

The package renews the rear disc and pad friction components as a compatible set. The discs use a carbon-fibre structure reinforced with silicon carbide, while the supplied low-metallic pads provide a controlled friction level with progressive modulation and release characteristics for road use.

Functions

• Replaces worn or damaged rear carbon-ceramic brake discs
• Provides a matched disc and pad combination
• Maintains a stable rear braking friction surface
• Reduces unsprung mass compared with conventional cast-iron discs
• Supports repeated heat management through the carbon-ceramic construction
• Produces less brake dust than typical cast-iron disc and pad combinations

Technical Details

• Rear disc dimensions: 390 x 32 mm
• Two-piece floating disc construction
• Carbon-fibre long-strand structure reinforced with silicon carbide
• CNC-machined 7075-T6 billet aluminium centre bells with a hard-anodised finish
• Disc weight stated by the manufacturer: 6.4 kg
• Low-metallic, resin-bonded road pads containing steel and aramid fibres; suitable only for carbon-ceramic discs

Symptoms of Fault

• Brake judder or vibration under deceleration
• Visible disc chipping, cracking or surface damage
• Discs approaching their specified minimum thickness
• Glazed, contaminated or unevenly worn brake pads
• Reduced initial brake response
• Noise or inconsistent braking from the rear axle

Why Replacement Matters

Carbon-ceramic discs and their compatible pads should be inspected as a complete friction system. Replacing damaged or worn components together helps avoid running new pads against an unsuitable disc surface or fitting a pad compound that is not intended for carbon-ceramic material. Before installation, inspect the calipers, wear sensors and fitting hardware, and confirm whether any reusable or one-time-use parts must be renewed separately.

FAQs

• Are the pads suitable for cast-iron discs? No. The supplied road pads are specified only for carbon-ceramic brake discs.
• Can these discs replace original PCCB components? They are designed as a direct-fit replacement for the relevant rear PCCB disc application.
• Should discs and pads be changed together? Renewing them as a matched package provides compatible friction materials and fresh mating surfaces.
• Are wear sensors and fitting hardware included? Package contents should be checked before installation, as sensors, fixings and other one-time-use hardware may be required separately.
• Is bedding-in required? Follow the supplied Ninemeister running-in procedure and avoid severe braking until the new friction surfaces have been conditioned correctly.