Fastenings & Fixings

Cap Closure For Ignition Coil Cover Cylinder 1-4.

The cap closure for the ignition coil cover is a small but essential component designed to secure the ignition coil cover in place on cylinders 1–4. This cap ensures that the protective engine cover remains firmly attached, helping to shield ignition components from dirt, moisture, and heat within the engine bay.

Fits:

• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16 

 
Diagram Ref No 7

What This Product Does:

• Secures the ignition coil cover in place
• Protects ignition coils and wiring from contaminants
• Maintains proper alignment of the engine cover
• Prevents movement or vibration of the cover during operation

Symptoms Of Wear Or Failure:

• Loose or poorly secured ignition coil cover
• Missing or broken cap closures
• Rattling noises from the engine cover area
• Engine cover not sitting correctly or lifting
• Visible wear, cracking, or deformation of the cap

Why Replacement Matters:

• Ensures the ignition coil cover is securely fastened
• Protects ignition components from dirt and moisture
• Prevents vibration and noise from loose covers
• Maintains correct engine bay appearance and organisation
• Supports long-term durability of ignition system components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7PP972487

The product you are viewing cross references to these numbers

Hexagon bolt - M12 x 1.5 x 130 - for the front cross member. 

Sold individually; x2 required per vehicle. 

Fits:
Porsche 970 Panamera 2010-16

Diagram ref. 10. 

Note: The front cross member is secured using bolts of various lengths. This listing specifically refers to the largest bolt. Additionally, the following bolts are required... 

2x 99907285901 (M12 x 1.5 x 58) - number 11 in the diagram
4x 99907284001 (M10 x 35) - number 9 in the diagram
2x 99907283101 (M10 x 30) - number 8 in the diagram

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF10845800

The product you are viewing cross references to these numbers

Large captive nut for front radiator console; sold individually.



-- x 10 required per vehicle -- 
Porsche Carrera GT 2004-06
-- x4 required per vehicle --

Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-12 
Porsche 987 Cayman 2006-12
Porsche 996 Carrera 1998-05
Porsche 996 Turbo / GT2 2001-05 
Porsche 996 GT3 1999-05
Porsche 997 Carrera 2005-12 
Porsche 997 GT3 2007-11
-- x2 required per vehicle -- 
Porsche 970 Panamera 2010-16

Bolt with washer - M12 x 1.5 x 115 - used to mount rear subframe. 

Sold individually; four required per vehicle.



Fits:
Porsche 970 Panamera 2010-16

Plastic Expansion rivet / trim clip

This Expansion Rivet is an OE Match fastening clip manufactured to replicate the original Porsche specification for fit, function, and durability. This push-fit plastic rivet is widely used throughout Porsche vehicles to secure lightweight components such as bumper covers, wheel arch liners, undertrays, and trim panels.

Widely used across multiple Porsche model ranges, including:
Porsche 911 (964, 993, 996, 997, 991)
Porsche Boxster & Cayman (986, 987, 981, 982)
Porsche Cayenne (955, 957)
Porsche Panamera (970)

Common applications include:
Bumper covers
Wheel arch liners
Undertrays and splash shields
Side skirts and trim panels


Ideal for both maintenance and restoration work, this OE Match rivet helps maintain factory-correct panel alignment and prevents movement, vibration, or detachment of essential trim components.

This expansion rivet provides a secure fixing point for various body and trim elements. It locks components into place by expanding within the mounting hole, ensuring panels remain properly aligned and firmly attached.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959194140

The product you are viewing cross references to these numbers

Roof Channel Cup Rivet For Retaining Clip.

The Roof Channel Cup Rivet for Retaining Clip is an OEM-spec body fastening rivet designed to secure retaining clips in the roof channel / roof trim area on compatible Porsche vehicles. This small but essential fixing helps hold roof-side trim and moulding components firmly in place, ensuring correct alignment, stability, and a clean factory finish.
Sold Each.
x12 Required Per Car.

Fits:

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16

Diagram Ref No 9

Roof channel fasteners are exposed to vibration, weather, and temperature changes, and missing or damaged rivets can lead to loose trim, rattles, wind noise, or poor trim seating. The cup rivet design provides a strong, durable fixing point for roof channel clips, helping prevent trim movement and maintaining proper fitment over time.

What This Product Does:

• Secures retaining clips in the roof channel area
• Helps hold roof trim or channel mouldings firmly in place
• Maintains correct alignment of exterior roof-side trim parts
• Prevents trim from loosening, vibrating, or lifting over time
• Supports weather-resistant fastening in exposed exterior areas

Symptoms Of A Missing Or Failed Roof Channel Rivet:

• Loose roof trim or channel moulding
• Rattling or vibration noises from the roof area
• Clips not holding correctly after trim removal
• Missing fasteners after windscreen or roof trim work
• Trim lifting at speed or after washing
• Water ingress risk due to poor trim seating

Why Replacement Matters:

• Keep roof trim secure and factory-aligned
• Prevent trim from detaching or flapping while driving
• Reduce wind noise caused by loose roof mouldings
• Support proper water drainage and weather sealing
• Maintain OEM-quality appearance after repair or restoration

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N90787802

The product you are viewing cross references to these numbers