Brake Pads & Disc Package

Brake disc rotor 380x30mm inc brake pads & sensors Porsche 992.1 Carrera GTS / Turbo

Brake Disc Ø:  380mm
Brake Disc Thickness: 30 mm,
Brake Disc Type: internally vented, two-part brake disc, Drilled


For Option Codes: 2EB / 2ET
Porsche 992.1 Carrera GTS
Porsche 992.1 Carrera 4 GTS
Porsche 992.1 Turbo

SHW PERFORMANCE, one of the world's leading brake disc manufacturers supplying directly to OEM, with product featured as standard equipment on many of today's new performance vehicles. 

THE ONLY TRUE REPLACEMENT.
NOTHING LESS THAN A TRUE FACTORY EQUIVALENT

SHW PERFORMANCE produces both one and two piece, ventilated disc brake rotors to cover a wide range of vehicle applications.​The vehicle application automatically dictates which style, composition and type of disc brake rotor is available, as SHW only offer a genuine direct replacement for the factory supplied disc.​For lesser performance orientated vehicles, a ventilated monoblock disc brake rotor produced from cast iron will more than suffice. For vehicles placing greater demand on the needed stopping power, a lightweight, composite, fully floating two-piece design is often preferred (the style of which is referred commonly as a peg or pin drive system). 

PERFORMANCE UNDER PRESSURE.
CONSISTENT RELIABILITY AND PERFORMANCE UNDER THE MOST DEMANDING OF CONDITIONS

Quality is a key ingredient from which to guarantee long term repeated reliability. SHW products are built to carry the high expectations required by exacting OEM standards and exceed them where possible.

PATENTED DESIGN PIN-DRIVE SYSTEM.
FROM WEIGHT REDUCTION TO IMPROVED COOLING, DISCOVER THE BENEFITS OF THE SHW PIN-DRIVE BRAKE ROTOR SYSTEM

Innovation, sustainability, added value. Welcome to SHW's patented Pin-Drive system, a substantial step forward in the future of braking.​

SHW's Pin-Drive system carries many benefits when compared to conventional methods of disc brake rotor design. So, what is 'Pin-Drive' and why is it advantageous over a one-piece disc brake rotor?

​The Pin-Drive system is a two piece fully floating disc brake rotor. The friction ring is connected to the central aluminium rotor bell by means of stainless steel pins which are cast into the assembly during the manufacturing process. The purpose behind the design is to offer a range of advantages:​

 - Up to 5.5lbs of weight reduction (rotating and unsprung weight) per disc compared to Monoblock.
 - Reduced thermal strain thanks to the friction ring having more freedom to expand and contract.
 - Low brake fading properties.
 - Improved durability.
 - Enhanced brake comfort thanks to optimised thermal conditions.
 - Optimal curved vane design that maintains structural strength while improving noise dampening. 

UNPARALLELED COOLING ADVANTAGES.
MAINTAIN OPTIMUM BRAKING PERFORMANCE FOR LONGER WITH IMPROVED COOLING PROPERTIES.

As well as a reduction in unsprung weight and improved braking characteristics, SHW's Pin-Drive design also prides itself on offering unbeatable cooling advantages, just one of the reasons why it has become the first choice for many OEM's.

Unlike other brake manufacturers, SHW developed a PATENTED improvement of the disc construction by offsetting the pin connection of the friction ring to the aluminium disc bell away from the center to the edge, which results in huge cooling gains.

By offsetting the pin connection of the friction ring to the aluminium bell the cooling channels running centrally through the rotor see a huge increase in accessibility and cooler air flow. This advantageous design offers up to a 50% cooling advantage gain when compared to traditional designs.

Allowing a greater flow of air, heat generated on the surface of the friction ring (via the brake pads clamping down under braking) is carried away faster and more efficiently, dramatically reducing inner core and surface temperatures across the complete disc brake rotor. In addition, due to the unique patented design, further weight savings are achieved thanks to a shallow aluminium disc bell.

THE IMPORTANCE OF AIR FLOW. WHEN AIR FLOW IS PARAMOUNT TO PERFORMANCE. THE LOWER THE OPERATING TEMPERATURES, THE HIGHER THE PERFORMANCE. The cold air is traditionally fed via air ducts located either in the front bumper, or channeled through pathways on the underside of the vehicles under tray. As the cold air enters the rear of the disc bell, it passes through vanes between the two brake rotor faces. The cooler air helps to reduce temperatures from the very core of the brake disc by collecting heat and carrying it outwards, away from the brake disc assembly and eventually venting back out into the passing air flow found circulating the inner wheel. 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT992TT.F.SHW

The product you are viewing cross references to these numbers

Carbon ceramic replacement brake disc and pad set (Front and Rear)
Road and Track Use
Porsche Cayman GT4 / 991 / 992



The kit is designed for easy replacement of OEM PCCB Carbon Ceramic (M450) brake discs and pads

Fits centre lock or 5 stud wheels




For use on road and track

Fits
Porsche 991 Turbo and Turbo S - Centre lock and 5 stud
Porsche 991.2 Carrera 2 and Carrera 4
Porsche 991.2 Carrera 2S and Carrera 4S
Porsche 991.2 Carrera GTS
Porsche 992 Carrera
Porsche 992 Carrera S
Porsche 981 Cayman GT4
Porsche 718 Cayman GT4
Porsche 718 Cayman Spyder

Front disc size - 410mm x 36mm
Rear disc size - 400mm x 32mm

Our material is a next-generation Carbon Fibre Reinforced Ceramic (CFRC) which is produced by Surface Transforms' proprietary processes, transforming Carbon-Carbon into our Carbon-Silicon Carbide (CSiC) ceramic.

Whilst the carbon-ceramic discs you find on production road cars conventionally use discontinuous (chopped) carbon fibre, ST interweaves continuous carbon fibre to form a 3D multi-directional matrix, producing a stronger and more durable product with 3x the heat conductivity of standard production components, this keeps the brake system temperature down and the brake performance consistent.

Surface Transforms has developed unique patented next-generation Carbon-Ceramic Technology that provides the ultimate braking performance for road and track.

Here's seven reasons why you need this technology on your vehicle:

• Weight savings of up to 70% compared to iron brakes (typically 20kg of unsprung weight)
• Improved handling and driveability
• Improved NVH (less noise, vibration and harshness)
• Improved performance (in both wet and dry conditions)
• Reduced brake wear – giving increased life
• Corrosion Free
• Outstanding performance, even from cold

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKITCARBON

The product you are viewing cross references to these numbers

Carbon ceramic upgrade brake disc and pad set (Front and Rear)
Road and Track Use
Porsche Cayman GT4 / 991.2



The upgrade kit is designed for the easy replacement of standard iron front brake discs to Carbon Ceramic items keeping the original red calipers. Kit includes OE brake hoses

Only for 5 stud wheels



For use on road and track

Fits
Porsche 991.2 Carrera 2 and Carrera 4
Porsche 991.2 Carrera 2S and Carrera 4S
Porsche 991.2 Carrera GTS
Porsche 991.2 turbo
Porsche 981 Cayman GT4
Porsche 718 Cayman GT4
Porsche 718 Cayman Spyder

Front disc size - 410mm x 36mm
Rear disc size - 400mm x 32mm

Our material is a next-generation Carbon Fibre Reinforced Ceramic (CFRC) which is produced by Surface Transforms' proprietary processes, transforming Carbon-Carbon into our Carbon-Silicon Carbide (CSiC) ceramic.

Whilst the carbon-ceramic discs you find on production road cars conventionally use discontinuous (chopped) carbon fibre, ST interweaves continuous carbon fibre to form a 3D multi-directional matrix, producing a stronger and more durable product with 3x the heat conductivity of standard production components, this keeps the brake system temperature down and the brake performance consistent.

Surface Transforms has developed unique patented next-generation Carbon-Ceramic Technology that provides the ultimate braking performance for road and track.

Here's seven reasons why you need this technology on your vehicle:

• Weight savings of up to 70% compared to iron brakes (typically 20kg of unsprung weight)
• Improved handling and driveability
• Improved NVH (less noise, vibration and harshness)
• Improved performance (in both wet and dry conditions)
• Reduced brake wear – giving increased life
• Corrosion Free
• Outstanding performance, even from cold

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKITCARBON1

The product you are viewing cross references to these numbers