在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
博世
Bosch for Porsche
Bosch parts for Porsche models from Design911, focusing on ignition, engine electrical, and key service items that help keep your car starting, running, and driving as it should.
A Quick Look at Bosch
Bosch information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Bosch is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose Bosch include improving reliability of sensors, ignition parts, and service components so that warning lights, hard starting, and poor running are less likely to reappear after repair.
- Common symptoms that lead to replacement include misfires, rough idle, hard starting, poor fuel economy, and intermittent or persistent sensor-related fault codes.
- Before replacing a part again, it is sensible to check battery voltage, wiring, connectors, and for vacuum or air leaks, as these often cause repeat issues even with new components.
- Where available, using live diagnostic data and carefully inspecting connectors helps confirm faults before you fit Bosch parts, reducing guesswork and unnecessary replacements.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Electrical — Engine electrical parts cover starting, charging, ignition, and many of the sensors and control components that keep your Porsche running smoothly; they are often replaced when diagnosing no-starts, misfires, charging issues, and warning lights, and Bosch is frequently chosen for known-quality engine management parts where listed.
- Check battery condition, grounds, and connector corrosion before condemning multiple components.
- Use fault codes as a guide but confirm with testing rather than replacing parts blindly.
Distributor Cap — Distributor caps are a wear item in older Porsche ignition systems; they are changed when chasing misfires, rough idle, damp-weather starting problems, or visible corrosion and tracking, and Bosch caps can be a suitable choice where specified for consistent spark distribution.
- Inspect inside the cap for dark tracking lines, cracks, and terminal corrosion if you notice misfires, especially in wet conditions.
- Consider replacing the cap together with the rotor so that both wear items are refreshed at the same time.
Ignition Coil — A single ignition coil is typically replaced when there are misfires under load, rough running as the engine warms up, or visible damage and leakage, and selecting a Bosch coil where applicable helps restore strong, consistent spark energy.
- Heat-related failures may only show when the engine is hot, so test and observe symptoms at full operating temperature.
- Check plugs and leads as part of diagnosis, as excessive resistance can overload coils and lead to repeat failures.
Service Parts — Service parts such as filters, plugs, and ignition items are renewed as routine maintenance to maintain performance, economy, and reliability; Bosch components are often used where their specification matches Porsche requirements.
- Regular servicing with quality parts can resolve multiple overlapping issues like hard starting, poor economy, and rough idle in one step.
- Keeping a dated service record helps future diagnostics and supports the car’s long-term value.
Ignition Coils — Sets or kits of ignition coils are fitted when misfires are present across cylinders, when the history is unknown, or as a reliability refresh, and Bosch coils can be an option where listed to match or complement Porsche ignition strategies.
- If one old coil has failed and others are the same age, renewing them together can reduce repeat misfire call-backs.
- Inspect coil boots and connectors carefully for cracks and tracking, and confirm spark plug specification before fitting new coils.
Explore Bosch at Design911
View the current Bosch range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
NEW, Anti-clockwise rotation, Flange Ø: 76 mm, with reduction gear, Voltage: 12 V, Starter Output: 1,7 kW, Teeth Quant.: 10

Fits:
Porsche 964 C2, C4 1989-94 Manual
Porsche 993 C2, C4, C2S, C4S 1994-98
Porsche 996 Turbo
Porsche 997 Turbo
Porsche 996 GT3
Porsche 997 GT3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99660410701
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13

Fits:
Porsche 911 2.7L 09/1975 - 06/1977
Porsche 911 3.0L SC 09/1975 - 06/1977
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91111017623
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Price ids for each.

Fits:
Porsche 987 Boxster / S 2007-08
Porsche 987C Cayman / S 2006-08
Porsche 997 3.6L / 3.8L 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 6
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760512300
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
#博世#
适用:
保时捷 996 Turbo / GT2 2001-05
保时捷 997 Turbo / GT2 / GT2 RS 2007-11
保时捷 997 Turbo / Turbo S 2010-13
保时捷 955 Cayenne Turbo 4.5L V8 2003-06
保时捷 957 Cayenne Turbo 4.8L V8 2007-10
2011款保时捷958 Cayenne Turbo 4.8L
保时捷 970 Panamera Turbo 4.8L 2011>>
点击“放大”查看零件大图。
图示编号 7
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99660618000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
Fits:
Porsche 912 1965-69
Porsche 356 / 356 A 1950-59
Porsche 356 B / 356 C
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
61660221503
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
#博世#
适用:
保时捷 Boxster 987 MK2 所有车型(催化转化器之后)
保时捷 Boxster 987C MK2 所有车型(催化转化器之后)
保时捷 997 GT3/GT3RS 2007-2011 所有车型(催化转化器之后)
功能:
氧传感器(也称λ传感器)位于排气歧管内,用于测量发动机尾气中未燃烧氧气的含量。根据氧气含量,它会向发动机电脑发送信号,电脑随后会调整空燃比,以实现最佳发动机性能和排放控制。
故障症状:
• 燃油消耗过高,氧传感器故障会导致燃油浪费高达 30%。
• 驾驶性能问题,例如发动机喘振或顿挫。
• 碳氢化合物排放量高,未通过排放检测。
• 发动机故障指示灯可能亮起或显示维修标志。
• ECU/电脑存储与混合气相关的故障代码。
• 当氧传感器完全停止工作时,催化转化器可能会过热并失效。
维护/服务:
• 每行驶 30,000 英里进行测试和/或更换。
• 定期进行排放检查。
• 注意故障指示灯。
• 汽车制造商建议定期检查和更换氧传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9A160612401
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 997 MKII GT3 2010-11
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
適用於:
保时捷 997 MK2 3.6L(催化转化器之前)
保时捷 997S MK2 3.8L(催化转化器之前)
功能:
氧传感器(也称为 Lambda 传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机计算机发送信号,然后计算机会调整空气/燃料混合物,以实现最佳发动机性能和排放控制。
故障症状:
• 燃料消耗过多,故障的氧气传感器可能会浪费30% 的燃料。
• 驾驶性能问题,例如发动机波动或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合相关的故障代码。
• 当氧传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9A160616803
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
#博世#
适用:
保时捷 993 1994-98
点击“放大”查看零件大图。
图示编号 7
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97

Fits:
Porsche 911 1965-73
Porsche 912E
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 912E 4CYL 1976
#博世#
合身
保时捷 957 Cayenne S 4.8L
保时捷 957 Cayenne Turbo 4.8L
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94860420600
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
#博世#
适用:
保时捷 955 Cayenne S 2003-06
保时捷 955 卡宴 Turbo 2003-06
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94860410600
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
6 Required per engine. Price is for each.

Fits:
Porsche Boxster 986 2.5L 1997-99
- 50 percent longer life than traditional copper core spark plugs
- Exclusive Yttrium extruded copper core center electrode increases resistance to spark erosion
- Tapered, v-profile nickel chromium ground electrode for consistent performance and prolonged service life
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99917020190
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99

火花塞 FGR 5NQE
6 件装
适合:
保时捷 991
保时捷 Boxster 981
保时捷 Boxster Spyder 2016
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99917015190
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16

Fits:
Porsche 911 Carrera 3.2L 1984-88
Porsche 924S 1986-88
Porsche 928S2 1985-86 Man Cars
Porsche 944 1982-91
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94411090100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 928S2 4.7L 1984-86

Fits:
Porsche Cayenne 955 V6 3.2L (after catalyst)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95560613610
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne 3.2L V6 2003-06

Fits:
Porsche Cayenne 955 V6 3.2L (before catalyst)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
955606128
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne 3.2L V6 2003-06