在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
博世
Bosch for Porsche
Bosch parts for Porsche models from Design911, focusing on ignition, engine electrical, and key service items that help keep your car starting, running, and driving as it should.
A Quick Look at Bosch
Bosch information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Bosch is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose Bosch include improving reliability of sensors, ignition parts, and service components so that warning lights, hard starting, and poor running are less likely to reappear after repair.
- Common symptoms that lead to replacement include misfires, rough idle, hard starting, poor fuel economy, and intermittent or persistent sensor-related fault codes.
- Before replacing a part again, it is sensible to check battery voltage, wiring, connectors, and for vacuum or air leaks, as these often cause repeat issues even with new components.
- Where available, using live diagnostic data and carefully inspecting connectors helps confirm faults before you fit Bosch parts, reducing guesswork and unnecessary replacements.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Electrical — Engine electrical parts cover starting, charging, ignition, and many of the sensors and control components that keep your Porsche running smoothly; they are often replaced when diagnosing no-starts, misfires, charging issues, and warning lights, and Bosch is frequently chosen for known-quality engine management parts where listed.
- Check battery condition, grounds, and connector corrosion before condemning multiple components.
- Use fault codes as a guide but confirm with testing rather than replacing parts blindly.
Distributor Cap — Distributor caps are a wear item in older Porsche ignition systems; they are changed when chasing misfires, rough idle, damp-weather starting problems, or visible corrosion and tracking, and Bosch caps can be a suitable choice where specified for consistent spark distribution.
- Inspect inside the cap for dark tracking lines, cracks, and terminal corrosion if you notice misfires, especially in wet conditions.
- Consider replacing the cap together with the rotor so that both wear items are refreshed at the same time.
Ignition Coil — A single ignition coil is typically replaced when there are misfires under load, rough running as the engine warms up, or visible damage and leakage, and selecting a Bosch coil where applicable helps restore strong, consistent spark energy.
- Heat-related failures may only show when the engine is hot, so test and observe symptoms at full operating temperature.
- Check plugs and leads as part of diagnosis, as excessive resistance can overload coils and lead to repeat failures.
Service Parts — Service parts such as filters, plugs, and ignition items are renewed as routine maintenance to maintain performance, economy, and reliability; Bosch components are often used where their specification matches Porsche requirements.
- Regular servicing with quality parts can resolve multiple overlapping issues like hard starting, poor economy, and rough idle in one step.
- Keeping a dated service record helps future diagnostics and supports the car’s long-term value.
Ignition Coils — Sets or kits of ignition coils are fitted when misfires are present across cylinders, when the history is unknown, or as a reliability refresh, and Bosch coils can be an option where listed to match or complement Porsche ignition strategies.
- If one old coil has failed and others are the same age, renewing them together can reduce repeat misfire call-backs.
- Inspect coil boots and connectors carefully for cracks and tracking, and confirm spark plug specification before fitting new coils.
Explore Bosch at Design911
View the current Bosch range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Fits:
Porsche 996 Turbo (AFTER Catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99660613801
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 TURBO 2000-05
#博世#
适合:
保时捷 996 C2/4 02>>(催化转换器之前)
*符合M661更严格排放控制概念的汽车
保时捷 997 C2/4 >>05(催化转换器之前)
保时捷 996 GT3 MKII 04>>(催化转换器之前)
功能:
氧传感器(也称为氧传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机电脑发送信号,电脑会调整空气/燃油混合比,以实现最佳发动机性能并控制排放。
故障症状:
• 燃料消耗过多,有故障的氧气传感器可能会浪费30%的燃料。
• 驾驶性能问题,例如发动机喘振或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合物相关的故障代码。
• 当氧气传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每 30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99660616801
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08

Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Porsche 964 Turbo 3.3 08/90-09/93
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96560612601
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93

Fits:
Porsche 958 Cayenne 8cyl. 4.8L 2011-17 (AFTER catalytic converter)
Porsche 958 Cayenne Turbo 8cyl. 4.8L 2011-17 (AFTER catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95860617200
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
Fits:
Porsche Cayenne 955 V8 (AFTER Catalytic converter)
Porsche Cayenne 955 Turbo (AFTER Catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95560613601
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>

Fits:
Porsche Cayenne 955 Turbo (BEFORE Catalytic converter)
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95560612602
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Fits:
Porsche 924S 1986-88
Porsche 944 1985-91
Porsche 968 1992-95
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94460613502
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94

Fits:
Porsche 997 GT3 / GT3 RS 2010-11
Porsche 997 GT3 RS 4.0 2011
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760513292
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
#博世#
適用於:
保时捷 997 Turbo 2007-09(催化转换器后)
保时捷 997 GT2 2008-09(催化转换器后)
功能:
氧传感器(也称为 Lambda 传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机计算机发送信号,然后计算机会调整空气/燃料混合物,以实现最佳发动机性能和排放控制。
故障症状:
• 燃料消耗过多,故障的氧气传感器可能会浪费30% 的燃料。
• 驾驶性能问题,例如发动机波动或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合相关的故障代码。
• 当氧传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760613803
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 TURBO 2007-09
#博世#
適用於:
保时捷 997 C2/4 2006>>(催化转换器之前)
功能:
氧传感器(也称为 Lambda 传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机计算机发送信号,然后计算机会调整空气/燃料混合物,以实现最佳发动机性能和排放控制。
故障症状:
• 燃料消耗过多,故障的氧气传感器可能会浪费30% 的燃料。
• 驾驶性能问题,例如发动机波动或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合相关的故障代码。
当氧传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760617601
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
#博世#
适合
保时捷 997 C2/4 2006>>(催化转化器后)
功能:
氧传感器(也称为 Lambda 传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机计算机发送信号,然后计算机会调整空气/燃料混合物,以实现最佳发动机性能和排放控制。
故障症状:
• 燃料消耗过多,故障的氧气传感器可能会浪费30% 的燃料。
• 驾驶性能问题,例如发动机波动或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合相关的故障代码。
• 当氧传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760617701
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
#博世#
适用:
保时捷 95B Macan S 3.0L / 涡轮增压 3.6L 2014-18
保时捷 958 卡宴 3.6L V6 Turbo / V6 Turbo GTS 2015-18
保时捷 970 Panamera S 3.0L 2014-16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99917023390
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18

適用於:
保时捷 Boxster 987 MK2 全部(催化转换器之前)
保时捷 Boxster 987C MK2 全部(催化转换器之前)
功能:
氧传感器(也称为 Lambda 传感器)位于排气歧管中,用于测量发动机排气中未燃烧的氧含量。根据氧含量,它会向发动机计算机发送信号,然后计算机会调整空气/燃料混合物,以实现最佳发动机性能和排放控制。
故障症状:
• 燃料消耗过多,故障的氧气传感器可能会浪费30% 的燃料。
• 驾驶性能问题,例如发动机波动或犹豫。
• 碳氢化合物排放量高,未通过排放检查。
• 发动机警告灯可能亮起或显示服务标志。
• ECU/计算机存储与混合相关的故障代码。
• 当氧传感器完全停止工作时,催化转化器可能会过热并发生故障
维护/服务:
• 每30,000 英里测试和/或更换一次。
• 定期进行排放检查。
• 注意服务灯。
• 汽车制造商建议定期检查和更换氧气传感器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9A160612302
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12

Fits:
Porsche 997 Turbo MKI
Porsche 997 Turbo MKII
Porsche 997 GT3 MKII
Porsche 957 Cayenne Turbo V8 4.8L MKII
A mass airflow sensor is used to determine the mass of air entering an electronically fuel-injected engine. The air mass information is necessary for the engine control unit (ECU) to calculate and deliver the correct fuel mass to the engine. Air changes its density as it expands and contracts with temperature and pressure. In automotive applications, air density varies with the ambient temperature and altitude, and this is an ideal application for a mass sensor.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99760612501
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
適用於:
保时捷 928 S2 / 928 S4 / 928 GT 1984-95 年
保时捷 944 S / 944 S2 1987-91
保时捷 964 C2 / C4 / RS 1989-94
单击“放大”可查看大部件图。
图表参考编号 9
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
#博世#
適用於:
保时捷 928 5.0L / 5.4L
保时捷 944S2
保时捷 944S 16V 1986-88
保时捷 968 1992-95 全部
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92860221101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95