请稍候… 
我们正在处理您的订单,请稍候
请不要按返回按钮… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://d911api.datadial.net/images/schemaLogo.png https://d911api.datadial.net/images/schemaLogo.png +443456003478 https://d911api.datadial.net Facebook Instagram

OZ 车轮

大约OZ 车轮

OZ Wheels 保时捷

OZ Wheels 已成为保时捷界的传奇品牌,其灵感源自赛车运动的合金轮毂被广泛应用于公路和赛道车型。在 Design911,您可以找到适用于各种保时捷车型的 OZ Wheels 轮毂,从性能升级到高端外观改装,应有尽有。

OZ Wheels 速览

本页上的 OZ Wheels 信息基于制造商或分销商提供的详细信息,以及零件随附的任何 OE 参考信息。

为您的保时捷选择合适的配置

如果 OZ Wheels 的产品适用于保时捷,请使用提供的车型覆盖范围和原厂零件编号来确认其适用性。检查通常会影响安装的细节,例如车型年份、位置/侧面以及连接器类型(如适用)。

  • 选择 OZ Wheels 轮毂用于保时捷的典型原因包括减轻簧下质量、改善转向响应,以及为高性能配置设计良好的刹车间隙。
  • 任何合金轮毂常见的故障包括振动、漆面剥落、腐蚀、路沿石损伤、缓慢漏气以及因路面坑洼或撞击造成的裂纹或变形。安装问题通常与轮毂偏距不正确、中心孔径不匹配或轮胎尺寸不合适等因素有关,这些都会导致摩擦。
  • 实用技巧:检查轮毂中心定位是否需要定位环,使用模板或测量方法确认制动卡钳间隙,并仔细匹配轮毂偏距。更换轮毂宽度或轮胎扁平比后,请检查四轮定位。

按类别浏览

如果您已经了解所研究的领域,请先从类别入手,然后按保时捷车型筛选。如果提供了实际故障症状和典型更换原因,请使用这些信息来确保措辞通俗易懂。

轮毂——OZ Porsche轮毂及轮毂升级配件通常用于修复损伤、翻新腐蚀或刮蹭的轮毂,或提升车辆外观和性能。如果您的保时捷车型有合适的轮毂,并且轮毂的偏距和尺寸匹配正确,那么这些轮毂可以帮助减轻重量、改善刹车间隙,并赋予车辆更具赛车风格的外观。

  • 购买前务必确认轮毂宽度、偏距(ET值)和刹车间隙。高速行驶时方向盘抖动通常与车轮平衡问题或轮毂变形有关,而裂纹则应视为安全隐患。

19英寸合金轮毂——保时捷的19英寸OZ合金轮毂常被选为更具动感、更富侵略性的车身姿态和灵敏操控性能的车型之选。如果已对轮胎和刹车系统进行升级(如适用),则需检查轮毂偏移量和间隙,以避免摩擦或循迹性问题。

  • 请注意,更换19英寸轮毂可能会影响乘坐舒适性,具体取决于轮胎规格和悬架设置。车辆行驶时的循迹性或不稳定性也可能凸显出现有的四轮定位或悬架磨损问题,因此几何检查和轮胎选择至关重要。

20英寸合金轮毂——20英寸OZ合金轮毂通常用于现代保时捷车型和SUV,它们不仅外观时尚,还能提供潜在的刹车间隙优势。如果您的爱车也配备了这种轮毂,并且载重等级和轮毂偏距合适,那么它们可以兼容更宽的轮胎,并带来更具动感的外观。

  • 较重的车辆和配备20英寸轮毂的低扁平比轮胎更容易受到路面坑洼的损坏,导致轮毂变形和轮胎鼓包。保持正确的轮胎气压并确保轮毂符合规定的载重等级,以降低损坏风险和操控问题。

OZ Wheels——专为保时捷车型打造的OZ品牌轮毂,融合了时尚造型、赛车运动传承,并在许多情况下注重轻量化设计。如果您的保时捷车型适配OZ Wheels轮毂,只要宽度、偏距和中心孔径匹配正确,即可提升转向响应、增加刹车间隙,并赋予车辆独特的外观。

  • 检查是否需要中心孔环以确保轮毂精准安装,并务必确认制动卡钳间隙。保持车轮和轮胎规格与车辆要求相符,有助于维持可预测的操控性和轮胎磨损。

20/21英寸终极锻造铝合金中心锁轮毂——OZ终极锻造铝合金中心锁轮毂专为配备兼容中心锁系统的保时捷车型设计,兼具轻量化、高强度和高刚性。在适用情况下,它们能够支持更注重赛道性能的调校,其响应性和性能足以满足严苛的驾驶需求。

  • 中心锁止系统对扭矩和安装的准确性要求非常高。请使用合适的工具并按照扭矩规格操作,首次使用后请重新检查扭矩,切勿在未进行适当且经认可的改装的情况下,尝试将中心锁止轮毂安装到不兼容的五孔轮毂上。

在 Design911 探索 OZ Wheels

在 Design911 查看 OZ Wheels 目前为保时捷提供的系列产品,然后按车型和类别筛选,缩小范围找到合适的零件。

显示从17到32(共39个产品)
1 2 3
W01C39002T6
Product Information
Product Information
Front wheel in 20" 8,5J ET54 Cast HLT Alloy. With Centre Lock Look wheel cap.
5-Stud wheel - PCD 5X130

oz

front
Fits:


Certificates: TUV, JWL, VIA, NAD

  • WIND TUNNEL OPTIMIZATION: The first aftermarket wheel to be tested in a wind tunnel.The first aftermarket wheel with pure racing-derived appendages and aerodynamic details.
  • PRO-TESTED: Pure racing-derived shapes and aerodynamic details. A wheel that embodies all of Oz’s racing experience, put to the test under the most challenging conditions.
  • AERO FLAP TECHNOLOGY: Special F1-derived aerodynamic inserts reduce air drag. Aerodynamic inserts promote an aerodynamic effect with a look reminiscent of Formula 1 wheels.
  • BRAKE COOLING TECHNOLOGY: An airflow extraction system increases air circulation and improves heat dissipation. An F1-derived airflow extraction system increases air circulation, dissipating the heat generated during braking.
  • HLT TECHNOLOGY: Weight reduction, stiffness optimization, improved handling. Manufacturing technology that makes the wheel lighter – which further elevates performance dynamics – while ensuring the kind of structural integrity required to pass the most stringent safety tests. The exclusive HLT manufacturing process delivers mechanical characteristics comparable to those of a forged wheel, in terms of both weight reduction and structural strength.
  • CENTRAL LOCK CAP: The Central Lock Look CAP mimics the single-nut closure typical of racing wheels.
W01C39001T6
Product Information
Product Information
Front wheel in 20" 8,5J ET49 Cast HLT Alloy. With Centre Lock Look wheel cap.
5-Stud wheel - PCD 5X130

oz

front
Fits:


Certificates: TUV, JWL, VIA, NAD

  • WIND TUNNEL OPTIMIZATION: The first aftermarket wheel to be tested in a wind tunnel.The first aftermarket wheel with pure racing-derived appendages and aerodynamic details.
  • PRO-TESTED: Pure racing-derived shapes and aerodynamic details. A wheel that embodies all of Oz’s racing experience, put to the test under the most challenging conditions.
  • AERO FLAP TECHNOLOGY: Special F1-derived aerodynamic inserts reduce air drag. Aerodynamic inserts promote an aerodynamic effect with a look reminiscent of Formula 1 wheels.
  • BRAKE COOLING TECHNOLOGY: An airflow extraction system increases air circulation and improves heat dissipation. An F1-derived airflow extraction system increases air circulation, dissipating the heat generated during braking.
  • HLT TECHNOLOGY: Weight reduction, stiffness optimization, improved handling. Manufacturing technology that makes the wheel lighter – which further elevates performance dynamics – while ensuring the kind of structural integrity required to pass the most stringent safety tests. The exclusive HLT manufacturing process delivers mechanical characteristics comparable to those of a forged wheel, in terms of both weight reduction and structural strength.
  • CENTRAL LOCK CAP: The Central Lock Look CAP mimics the single-nut closure typical of racing wheels.
W04169001
Product Information
Product Information
Front wheel in 20" 8.5J ET53 - Forged Aluminium

Certificates: TUV approved

oz

front
Fits:
Porsche 992.1 Carrera with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04170001
Product Information
Product Information
Front wheel in 20" 10J ET45 - Forged Aluminium

Certificates: TUV approved

oz

front
Fits:
Porsche 992.1 GT3 RS with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04171001
Product Information
Product Information
Rear wheel in 21" 13J ET31 - Forged Aluminium

Certificates: TUV approved

oz

rear
Porsche 992.1 GT3 RS with Centre Lock 

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04168001
Product Information
Product Information
Rear wheel in 20" 11J ET50 - Forged Aluminium

Certificates: TUV approved

oz

rear
Porsche 991.1 TURBO with Centre Lock 
Porsche 718 GT4 RS with Centre Lock 

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04167001
Product Information
Product Information
Front wheel in 20" 8.5J ET61 - Forged Aluminium

Certificates: TUV approved

oz

front

Porsche 718 GT4 RS with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04166001
Product Information
Product Information
Front wheel in 20" 9J ET51 - Forged Aluminium

Weight: 8.77kg
Certificates: TUV approved

oz

front

Porsche 991.1 Turbo with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04165001
Product Information
Product Information
Rear wheel in 21" 12.5J ET48 - Forged Aluminium

Weight: 10.87kg
Certificates: TUV approved

oz

rear
Porsche 991.1  GT3 RS with Centre Lock 
Porsche 991.2  GT3 RS with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04164001
Product Information
Product Information
Rear wheel in 21" 12J ET70 - Forged Aluminium

Weight: 10.77kg
Certificates: TUV approved

oz

rear
Porsche 992.1 Turbo with Centre Lock 
20" Front / 21" Rear wheel set up

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04163001
Product Information
Product Information
Rear wheel in 21" 12J ET45 - Forged Aluminium

Weight: 10.71kg
Certificates: TUV approved

oz

rear
Porsche 992.1 GT3 with Centre Lock 
20" Front / 21" Rear wheel set up

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04162001
Product Information
Product Information
Rear wheel in 21" 11.5J ET67 - Forged Aluminium

Weight: 10.51kg
Certificates: TUV approved

oz

rear
Porsche 992.1 Turbo with Centre Lock 
Porsche 992.1 Carrera with Centre Lock 
20" Front / 21" Rear wheel set up

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04161001
Product Information
Product Information
Front wheel in 20" 9.5J ET46 - Forged Aluminium

Weight: 9.11kg
Certificates: TUV approved

oz

front
Fits:
Porsche 992.1 GT3 with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04160001
Product Information
Product Information
Front wheel in 20" 9.5J ET44 - Forged Aluminium

Weight: 9.11kg
Certificates: TUV approved

oz

front
Porsche 992.1 Turbo with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04159001
Product Information
Product Information
Front wheel in 20" 9.5J ET50 - Forged Aluminium

Weight: 8.97kg
Certificates: TUV approved

oz

front
Porsche 991.1  GT3 RS with Centre Lock 
Porsche 991.2  GT3 RS with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

W04158001
Product Information
Product Information
Front wheel in 20" 9J ET41 - Forged Aluminium

Weight: 8.95kg
Certificates: TUV approved

oz

front
Porsche 992 Turbo 2020>> with Centre Lock

As always, the goal of the OZ Tech Lab was very ambitious – the transfer of R&D technologies and production process optimization developed during conceptualization of the limited edition in magnesium to its offspring – the Ultimate ALU.


Please note: The wheels are subject to special order terms and conditions. Delivery may take few weeks depending on factory's schedule.

显示从17到32(共39个产品)
1 2 3