在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
北赛道
Nordschleife for Porsche
Nordschleife parts for Porsche at Design911 are typically chosen by drivers looking for fast-road and track-inspired setups, with a focus on consistency, heat management, and confidence under repeated hard use.
A Quick Look at Nordschleife
Nordschleife information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Nordschleife is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side or position on the vehicle, and connector or mounting type where relevant.
- Typical reasons people choose Nordschleife-style parts include improving braking consistency, managing heat, and making the car feel stable and predictable during fast-road or track driving.
- Many issues blamed on “hardware” are actually down to fluid choice, pad compound mismatch, alignment settings, or insufficient cooling and airflow.
- Common symptoms that may prompt upgrades include brake fade, tyre overheating, vague handling, oil temperature creep, and inconsistent performance over repeated laps or hard road use.
- Plan changes as a package where possible, as tyres, brakes, alignment, and fluids all work together in how your Porsche behaves.
- Expect some increase in noise or firmness from more track-focused parts, and measure results (temperatures, wear, pressures) so you can adjust methodically rather than guessing.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Steering Parts — Steering components affect precision, feedback, and safety. These parts are typically replaced to remove play, restore accurate response, and tailor how direct or comfortable your Porsche feels, whether for road or track-style use.
- After replacing steering parts, a proper alignment is essential, and it is often sensible to replace related components in pairs and have a specialist check for suspension bush wear that can mimic steering faults.
Steering Racks — The steering rack is central to directional control and steering feel. Replacement or upgrade is usually driven by internal wear, leaks, or excess play, with choices between original-style, remanufactured, or performance-focused options.
- Where a rack is changed, many workshops recommend new track rods if worn, and it is good practice to flush the system and refill with the correct fluid to protect the pump and seals.
Suspension & Axle — Suspension and axle parts control ride quality, grip, and stability. They are replaced to cure knocks, wandering, uneven tyre wear, and to restore the balanced handling and braking stability Porsche cars are known for.
- Suspension work often requires alignment afterwards; replacing parts in pairs and starting with a clear diagnosis of play and wear helps avoid chasing noises or handling issues.
Drop Links & Bushes REAR — Rear anti-roll bar links and bushes help control body roll and rear-end stability. Replacing tired components reduces knocking, improves composure in corners, and keeps the rear of the car feeling connected and predictable.
- It is common to change both sides together and to inspect anti-roll bar bushes and shock mounts at the same time, as several minor wear points can combine to create similar noises.
Suspension Upgrades — Suspension upgrades are used to fine-tune body control, roll stiffness, and response for your chosen use, from fast-road driving to track days. Brand and specification are usually selected based on desired ride height, firmness, and adjustability.
- Upgrades only deliver benefits when matched to the car and set up correctly, so plan for geometry and possibly corner-weighting, and decide in advance whether your priority is comfort, mixed use, or maximum response.
Explore Nordschleife at Design911
View the current Nordschleife range for Porsche at Design911, then filter by model and category to narrow down to the parts that best suit your car and intended use.
翻新转向机,适用于左舵车
适用:
保时捷 Boxster 986 1997-04
保时捷 996 1997-04
* 左舵车(如欧洲车型)
我们强烈建议您在更换转向机的同时更换动力转向泵。动力转向系统中的金属屑(金属颗粒)会循环并损坏这两个部件。如果您选择仅更换转向机,而我们在收到您的旧件后发现转向机杆有划痕或沾有金属屑,则表明系统中存在杂质。在这种情况下,我们建议您同时更换动力转向泵。
请注意:如果我们已告知您系统中存在金属屑,而您选择不更换这两个组件,则与此问题相关的任何未来保修索赔将无效。
请注意:翻新机以旧换新方式出售,将收取 295.00 英镑的附加费,旧机退回后将退还该附加费。
最常见的动力转向系统故障包括:
动力转向系统泄漏
撕裂的鳄鱼
怠速时难以转向
很难单向转向
方向盘无法自动回正
- 怠速时的噪音
转向时发出噪音
转向时车身抖动
- 转向系统完全失灵
- 转向助力半丧失
- 电动转向系统问题
以上仅列举了我们客户日常使用动力转向系统时遇到的一些问题。我们可以用翻新件替换您旧的转向系统。如果没有现成的替换件,我们可以回收您原有的转向系统并进行翻新。全新转向系统可能要花费数千英镑,而我们翻新/供应的翻新件价格仅为全新件的一小部分!
所有翻新货架均提供1年或12000英里保修!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99634701111
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
翻新转向机,适用于左舵车(LHD 汽车)
适用:
保时捷 964 Carrera / Turbo(非 RS)
左舵车(如欧洲)
我们强烈建议您在更换转向机的同时更换动力转向泵。动力转向系统中的金属屑(金属颗粒)会循环并损坏这两个部件。如果您选择仅更换转向机,而我们在收到您的旧件后发现转向机杆有划痕或沾有金属屑,则表明系统中存在杂质。在这种情况下,我们建议您同时更换动力转向泵。
请注意:如果我们已告知您系统中存在金属屑,而您选择不更换这两个组件,则与此问题相关的任何未来保修索赔将无效。
请注意:翻新机以旧换新方式出售,将收取 1695.00 英镑的附加费,并在旧机退回时退还。
请注意,我们目前很难供应优质的翻新转向机,原因很简单,旧件交换件没有被退回。如果您未能在30天内退回旧件,我们将保留向您收取全新转向机全价的权利。
最常见的动力转向系统故障包括:
动力转向系统泄漏
撕裂的鳄鱼
怠速时难以转向
很难单向转向
方向盘无法自动回正
- 怠速时的噪音
转向时发出噪音
转向时车身抖动
- 转向系统完全失灵
转向助力略有下降
- 电动转向系统问题
以上仅列举了我们客户日常使用动力转向装置时遇到的一些问题。我们可以用翻新件替换您旧的装置。如果没有现成的替换件,我们可以回收您原有的装置并进行翻新。全新装置可能要花费数百英镑,而我们翻新/供应的装置价格仅为全新装置的几分之一!
所有翻新货架均提供1年或12000英里保修!
- 当收到并经我方和相关制造商批准更换的部件后,我们将退还该翻新部件的附加费。
- 请注意,附加费退款通常需要制造商批准,平均需要 6 到 8 周时间。
- 是否接受更换零件由制造商自行决定,取决于该零件是否适合翻新。
- 所有附加费和换货均受我们的条款和条件约束。
请注意:
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434700904
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
翻新转向机,适用于左舵车
适用:
保时捷 993 Carrera / Turbo(非 RS)
左舵车(如欧洲)
我们强烈建议您在更换转向机的同时更换动力转向泵。动力转向系统中的金属屑(金属颗粒)会循环并损坏这两个部件。如果您选择仅更换转向机,而我们在收到您的旧件后发现转向机杆有划痕或沾有金属屑,则表明系统中存在杂质。在这种情况下,我们建议您同时更换动力转向泵。
请注意:如果我们已告知您系统中存在金属屑,而您选择不更换这两个组件,则与此问题相关的任何未来保修索赔将无效。
请注意:此商品以旧换新,我们将收取一定费用,并在旧商品退回后退还该费用。
请注意,我们目前很难供应优质的翻新转向机,原因很简单,旧件交换件没有被退回。如果您未能在30天内退回旧件,我们将保留没收您已支付全部定金的权利。
所有翻新货架均提供1年或12000英里保修!
最常见的动力转向系统故障包括:
动力转向系统泄漏
撕裂的鳄鱼
怠速时难以转向
很难单向转向
方向盘无法自动回正
- 怠速时的噪音
转向时发出噪音
转向时车身抖动
- 转向系统完全失灵
转向助力略有下降
- 电动转向系统问题
以上仅列举了我们客户日常使用动力转向装置时遇到的一些问题。我们可以用翻新件替换您旧的装置。如果没有现成的替换件,我们可以回收您原有的装置并进行翻新。全新装置可能要花费数百英镑,而我们翻新/供应的装置价格仅为全新装置的几分之一!
- 当收到并经我方和相关制造商批准更换的部件后,我们将退还该翻新部件的附加费。
- 请注意,附加费退款通常需要制造商批准,平均需要 6 到 8 周时间。
- 是否接受更换零件由制造商自行决定,取决于该零件是否适合翻新。
- 所有附加费和换货均受我们的条款和条件约束。
请注意:
- 当收到并经我方和相关制造商批准更换的部件后,我们将退还该翻新部件的附加费。
- 请注意,附加费退款通常需要制造商批准,平均需要 6 到 8 周时间。
- 是否接受更换零件由制造商自行决定,取决于该零件是否适合翻新。
- 所有附加费和换货均受我们的条款和条件约束。
请注意:
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99334701100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
翻新转向机,适用于右舵车
适用:
适用于右舵驾驶车辆(例如英国)
保时捷 955 Cayenne 2003-06
保时捷 957 Cayenne 2007-10
* 配备速度感应式动力转向系统的车辆(选装代码:I1N3)
我们强烈建议您在更换转向机的同时更换动力转向泵。动力转向系统中的金属屑(金属颗粒)会循环并损坏这两个部件。如果您选择仅更换转向机,而我们在收到您的旧件后发现转向机杆有划痕或沾有金属屑,则表明系统中存在杂质。在这种情况下,我们建议您同时更换动力转向泵。
请注意:如果我们已告知系统内有金属屑,而您选择不更换这两个组件,则与此问题相关的任何未来保修索赔将无效。
最常见的动力转向系统故障包括:
动力转向系统泄漏
撕裂的鳄鱼
怠速时难以转向
很难单向转向
方向盘无法自动回正
- 怠速时的噪音
转向时发出噪音
转向时车身抖动
- 转向系统完全失灵
- 转向助力半丧失
- 电动转向系统问题
以上仅列举了我们客户日常使用动力转向装置时遇到的一些问题。我们可以用翻新件替换您旧的装置。如果没有现成的替换件,我们可以回收您原有的装置并进行翻新。全新装置可能要花费数百英镑,而我们翻新/供应的装置价格仅为全新装置的几分之一!
所有翻新货架均提供1年或12000英里保修!
- 当收到并经我方和相关制造商批准更换的部件后,我们将退还该翻新部件的附加费。
- 请注意,附加费退款通常需要制造商批准,平均需要 6 到 8 周时间。
- 是否接受更换零件由制造商自行决定,取决于该零件是否适合翻新。
- 所有附加费和换货均受我们的条款和条件约束。
请注意:
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95534701231
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10