复古线

Cup / drinks holder. Side mount



Fits
Fits 718 Boxster, 718 Cayman, 718 Spyder, 911, Boxster, Cayman.

** Any Porsche with this centre console design will fit ** (some may be missing from below, I will update as best I can)

Porsche 991 ALL
Porsche 718 ALL
Porsche 981 ALL
Porsche 911 ALL 2011+
Porsche Boxster ALL 2013+
Porsche Cayman ALL 2014+

I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to utilize un-used space in the car and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. 1x Side Bracket. 1x Cup Bracket. Satin Black. Plug and play. 5-15 min install time.

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. YETI, Blender bottles, and larger size tumblers fit great.

Plug & Play: Minimal to no tools required. Pull on the centre console passenger side cover. Slip the side bracket in. It will slide into place and you will feel it lock into the casting behind the side cover. Screw the cup bracket into the side bracket. Slide cup onto the bracket.




Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

保时捷 964 / 993 仪表盘上的MPH液晶显示屏替换件



此 LCD 面板适用于配备 M659 车载电脑的汽车的转速表 LCD 面板只能由专业人员安装

适合：
保时捷 964 1989-94
保时捷 993 1994-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

993641312XX

您正在查看的产品与这些编号存在交叉引用关系

Centre console cup / drinks holder. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder. Phone Holder Edition - Additional slot is added to fit your phone



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder, Standard Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

已完全准备好 911 1970-1973 前线束，带有 2 x 6 极公连接器和继电器底座（用于喇叭）。

適用於:
保时捷 911 1971 - 1973 年

• 给系带钢丝打蜡，且每根钢丝的长度合适。
• 从保险丝盒延伸至左、右挡泥板/清洗泵。
• 原装彩色编码线路。
• 线束将与原装线束完全贴合。
• 电线管、耐油胶带为原装。
• 端子带有橡胶套。
• 包括新的 6 极公连接器和继电器插座。

图表参考编号 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161200310

您正在查看的产品与这些编号存在交叉引用关系

Blank key shank in silver Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911538900SL

您正在查看的产品与这些编号存在交叉引用关系

Blank key shank in black Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911538900BK

您正在查看的产品与这些编号存在交叉引用关系

Blank key shank in golden Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911538900GL

您正在查看的产品与这些编号存在交叉引用关系

Seat side bolster foam. for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9115211

您正在查看的产品与这些编号存在交叉引用关系

座椅底座中心泡沫。适用于运动座椅。

#复古线#

适合:
保时捷911（1970-73年）

单击“放大”可查看大部件图。
图表参考编号 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152110200

您正在查看的产品与这些编号存在交叉引用关系

运动座椅的靠背侧垫泡沫。

#复古线#

適用於:
保时捷 911 1970-73

单击“放大”可查看大部件图。
图表参考编号 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152119

您正在查看的产品与这些编号存在交叉引用关系

Backrest centre foam for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152110400

您正在查看的产品与这些编号存在交叉引用关系

指示杆柱开关杆。合金坯料杆替换件。

#复古线#

适合:
保时捷911 1976-89

请注意：您需要将现有组件中的弹簧安装到新的杆上。新的弹簧不包含在杆内。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161330506

您正在查看的产品与这些编号存在交叉引用关系

356 风格内部扶手，带储物空间。

适合:
保时捷 911（G 型）1974 - 1989
保时捷 964
保时捷 993

想要个性化定制您的 911 座驾吗？这款产品正是您的理想之选。356 款扶手带可折叠门袋，可存放太阳镜、钥匙等物品，完美契合您的 911 座驾。每副扶手均采用优质铝材精制而成，配有铰链式储物门，颜色可选抛光银、缎面银和哑光黑。

门袋未装饰，因此安装前必须进行装饰

套件包括：
• 一对扶手
• 一对门套、铰链和亮饰件

购买后将以 PDF 文件形式发送安装说明。

请注意：此部件需特殊订购。交货时间通常为4-5周。如无特殊需求，不可取消或退货。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911356AR

您正在查看的产品与这些编号存在交叉引用关系