土比

Sports exhaust silencer Porsche 991.1 Carrera S with bypass valves 2012-2015



Fits
Porsche 991.1 Carrera S 2012-2015
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

Sport exhaust silencers Porsche 991.1 Carrera S with bypass valves



FITS
Porsche 991.1 Carrera S 2012-2015

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

991.1 Carrera S is different from Carrera because it has the bypass valves
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand.

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips.

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with titanium sandblasted finish



Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R

DOES NOT FIT 997

This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - SANDBLASTED TITANIUM
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TSPO99112.023.T

您正在查看的产品与这些编号存在交叉引用关系

Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with polished finish



Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R

DOES NOT FIT 997

This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TSPO99112.023.A

您正在查看的产品与这些编号存在交叉引用关系

排气汽油颗粒 (GPF) 过滤器旁通管保时捷 718 GT4 Spyder 和 GTS 4.0ltr



适合
保时捷 Boxster 718 Spyder 4.0升
保时捷 Boxster 718 GTS 4.0升
保时捷Cayman 718 GT4 4.0升
保时捷卡曼 718 GTS 4.0升

仅限赛道使用
这些部件专为赛道使用而设计和开发，旨在最大限度地提升车辆性能。它们不合法上路，必须由该领域的专业人员安装。

汽油微粒过滤器
（GPF）拆除
为了减少排气背压并增加噪音输出，该组件移除了标准 GPF


AISI 304 不锈钢
适用于腐蚀性环境的不锈钢，在这种环境中，燃烧排放物可能会对其他类型的金属造成严重的化学腐蚀

主管尺寸 - 55mm
这是排气系统主管道的直径

注意：运动型催化转化器和旁通管未获得型式认证，法律不允许用于2001年3月1日后在英国生产的车辆。它们不符合MOT（机动车检查）标准，不得在公共道路上使用。这些部件仅适用于比赛和赛道使用。如果您位于英国境外，请查阅当地法律法规，以确保符合规定。

排气催化转换器旁通管。



保时捷卡宴S（955）4.5升 2002-2006年

仅限赛道使用
这些部件专为赛道使用而设计和开发，旨在最大限度地提升车辆性能。它们不适用于道路行驶，必须由该领域的专业人员安装。

按照制造商车间手册中的说明，该组件可与原始组件完美互换。

催化转化器拆除
完全拆除催化转化器可最大限度地减少排气背压，并在性能和减轻重量方面实现最佳效果。

ECU重新映射
发动机灯
更换或拆卸催化转化器、GPF 和电动执行器等部件可能会导致发动机警告灯亮起。在这种情况下，安装人员必须重新编程软件以消除该灯。

材料
AISI 304 不锈钢
一种适合腐蚀性环境的不锈钢，在这种环境中燃烧排放可能会对其他类型的金属造成严重的化学腐蚀。

主管尺寸 - 60mm
这是排气系统主管的直径。

注意：运动型催化转化器和旁通管未获得型式认证，法律不允许用于2001年3月1日后在英国生产的车辆。它们不符合MOT（机动车检查）标准，不得在公共道路上使用。这些部件仅适用于比赛和赛道使用。如果您位于英国境外，请查阅当地法律法规，以确保符合规定。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

04090581307

您正在查看的产品与这些编号存在交叉引用关系

排气催化转换器旁通管。



保时捷卡宴 (955) Turbo 2002-2006

仅限赛道使用
这些部件专为赛道使用而设计和开发，旨在最大限度地提升车辆性能。它们不适用于道路行驶，必须由该领域的专业人员安装。

按照制造商车间手册中的说明，该组件可与原始组件完美互换。

催化转化器拆除
完全拆除催化转化器可最大限度地减少排气背压，并在性能和减轻重量方面实现最佳效果。

ECU重新映射
发动机灯
更换或拆卸催化转化器、GPF 和电动执行器等部件可能会导致发动机警告灯亮起。在这种情况下，安装人员必须重新编程软件以消除该灯。

材料
AISI 304 不锈钢
一种适合腐蚀性环境的不锈钢，在这种环境中燃烧排放可能会对其他类型的金属造成严重的化学腐蚀。

主管尺寸 - 65mm
这是排气系统主管的直径。

注意：运动型催化转化器和旁通管未获得型式认证，法律不允许用于2001年3月1日后在英国生产的车辆。它们不符合MOT（机动车检查）标准，不得在公共道路上使用。这些部件仅适用于比赛和赛道使用。如果您位于英国境外，请查阅当地法律法规，以确保符合规定。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

04090571307

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust kit Porsche 991.1 Carrera S 2012-2015



The kit includes the two side mufflers and the central silencer
Carrera S exhaust is different from Carrera because it has the bypass valves

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

Sports exhaust Porsche 718 GT4, SPYDER & GTS 4.0



Until February 2020

This exhaust system can be fitted on every 4.0ltr model produced until February 2020. In March a new fixing system based on silent block has been introduced

SOUND: STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning.

EXHAUST VALVE: PNEUMATIC
The exhaust system is complete with pneumatic valve to replace the standard pneumatic valve installed on the car. Control of the original valve is still provided.

END TIPS DESIGN: OE
The muffler must be used in conjunction with the original exhaust end tips.

RACETRACK USE ONLY
STRAIGHT PIPE AISI 304 STAINLESS STEEL

Sports exhaust kit for Porsche 718 Boxster, Cayman and GTS 2.0ltr & 2.5ltr with exhaust valve



718 Boxster, Cayman & GTS with and without GPF (gasoline particulate filter)
2.0/2.5Ltr 2016 onwards

RACETRACK USE ONLY

SOUND: TUBI SOUND

Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand.

This kit must be mounted only on cars with an OE exhaust already equipped with pneumatic valves.The OE end tips must be used.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

EXHAUST: VALVE PNEUMATIC
The exhaust system is complete with pneumatic valve to replace the standard pneumatic valve installed on the car. Control of the original valve is still provided.

END TIPS DESIGN: OE
The muffler must be used in conjunction with the original exhaust end tips.
END TIPS NUMBER AND POSITION
2 CENTRAL
The end tips emerge from the centre.

AISI 304 STAINLESS STEEL
MAIN PIPE DIMENSION

A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

Sports exhaust kit for Porsche 718 Boxster & Cayman without exhaust valve



718 Boxster, Cayman & GTS with and without GPF (gasoline particulate filter)
2.0/2.5Ltr 2016 onwards

RACETRACK USE ONLY:

SOUND: TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand.

The kit includes the right and left-hand mufflers without valve. It can be assembled on the OE central silencer, or in combination with the Tubi Style central silencer.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

EXHAUST VALVE: NO VALVE

The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the exhaust valve by both the engine ECU and by the driver via the specific control systems is no longer possible.

The muffler must be used in conjunction with the original exhaust end tips.

END TIPS DESIGN OE
The muffler must be used in conjunction with the original exhaust end tips.

MATERIAL
AISI 304 STAINLESS STEEL

A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

Sports exhaust straight pipe Porsche 718 GT4, SPYDER & GTS 4.0



From March 2020

This exhaust system can be fitted on every 4.0ltr model produced from March 2020. In March a new fixing system based on silent block has been introduced

SOUND STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning.

EXHAUST VALVE PNEUMATIC
The exhaust system is complete with pneumatic valve to replace the standard pneumatic valve installed on the car. Control of the original valve is still provided.

END TIPS DESIGN OE
The muffler must be used in conjunction with the original exhaust end tips.

RACETRACK USE ONLY
STRAIGHT PIPE AISI 304 STAINLESS STEEL