在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
选择您的车辆以查看兼容性
LN Engineering
106-24
Product Information

Fits:
Porsche 996 1997-05
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
For those familiar with using an Accusump on your M96 or M97-equipped Boxster, Cayman, or 911, you are probably familiar with the lack of ground clearance, requiring use of a very small (shorty) oil filter.
The LN Engineering Billet Spin-On High Performance Oil Filter uses a slightly increased porosity stainless mesh (60 versus the 30 micron of the stock paper filter). Along with increased surface area and larger pore size, our "shorty" Billet High Performance Washable Oil Filter will outperform the 1081 or it's larger sibling, the 1042, hands down. This increase in flow along with a smaller pressure loss across the element ensures the best possible protection for your engine from oil starvation. When coupled with our magnetic drain plug, a superior lubricant like Joe Gibbs XP9, and reduced drain intervals, our billet filter provides the best balance for cars that see both street and track use. With the introduction of our billet filter, for applications where ground clearance needs to be observed, we no longer recommend the Napa Gold 1081 and use of our billet filter is highly recommended for all vehicles used on the track instead of the Napa Gold 1042. The proper procedure for cleaning the filter involves dis-assembly of the filter and removal of the washable element. Wash out filter cup with mineral spirits or similar solvent. Do not get solvent of any type on the o-rings or seals, otherwise they will have to be replaced. Be sure to clean the filter element from the inside out to ensure media is clean. Oil o-rings and seals prior to re-assembly. Pre-fill the oil filter if so desired. Snug up the filter when re-installing and turn 1/2 to 3/4 of a turn tighter by hand as you would a conventional spin on oil filter.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
106-24
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Billet Shorty Oil Filter Assy. Replaces Napa Gold 1081 filter.
Fits:
Porsche 996 1997-05
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
For those familiar with using an Accusump on your M96 or M97-equipped Boxster, Cayman, or 911, you are probably familiar with the lack of ground clearance, requiring use of a very small (shorty) oil filter.
The LN Engineering Billet Spin-On High Performance Oil Filter uses a slightly increased porosity stainless mesh (60 versus the 30 micron of the stock paper filter). Along with increased surface area and larger pore size, our "shorty" Billet High Performance Washable Oil Filter will outperform the 1081 or it's larger sibling, the 1042, hands down. This increase in flow along with a smaller pressure loss across the element ensures the best possible protection for your engine from oil starvation. When coupled with our magnetic drain plug, a superior lubricant like Joe Gibbs XP9, and reduced drain intervals, our billet filter provides the best balance for cars that see both street and track use. With the introduction of our billet filter, for applications where ground clearance needs to be observed, we no longer recommend the Napa Gold 1081 and use of our billet filter is highly recommended for all vehicles used on the track instead of the Napa Gold 1042. The proper procedure for cleaning the filter involves dis-assembly of the filter and removal of the washable element. Wash out filter cup with mineral spirits or similar solvent. Do not get solvent of any type on the o-rings or seals, otherwise they will have to be replaced. Be sure to clean the filter element from the inside out to ensure media is clean. Oil o-rings and seals prior to re-assembly. Pre-fill the oil filter if so desired. Snug up the filter when re-installing and turn 1/2 to 3/4 of a turn tighter by hand as you would a conventional spin on oil filter.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
106-24
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
价格: €247.27
也可在这些页面找到