Sports exhaust rear silencer Porsche 957 Cayenne turbo and turbo S  ❭  TSPOCAY07.000.A

Fabspeed Maxflo 性能排气系统。

在整个 RPM 范围内，通过更嘶哑、更深沉的排气音来提高功率并减轻重量；包括黑色、抛光或碳纤维豪华四式尖端

特征：
•适合所有保时捷 970 Panamera Turbo/Turbo S 车辆（2010 年以后），包括 Executive 车型
• 提高动力和油门响应
包括 Fabspeed 豪华四头式尖端，抛光铬或黑铬饰面
• 在整个 RPM 范围内改善跑车的声音和动力
• 采用高品质 14-16ga CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 直接用螺栓固定替换限制性的工厂消声器
• 所有 Fabspeed 性能产品均享有 Fabspeed 终身有限保修

请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970TMAX

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust loud silencers.
Loud version without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Sports exhaust silencers.
Without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible