Original Porsche Part 原装 Porsche 零部件 90021902030

代码: 90021902030

原装 Porsche 零部件

Original Porsche Part

附加信息：

• 此部件是全新的且未使用过的。
• 购买前请验证它是否 100% 适合您的特定车辆，以确保兼容性。

购买前请仔细检查零件以确认兼容性。

相关产品

Billet shorty oil filter assy. Porsche 986/987 Boxster / Cayman / 996 / 997

106-24

Product Information

Billet Shorty Oil Filter Assy. Replaces Napa Gold 1081 filter.

lnengineering

Fits:
Porsche 996 1997-05
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

For those familiar with using an Accusump on your M96 or M97-equipped Boxster, Cayman, or 911, you are probably familiar with the lack of ground clearance, requiring use of a very small (shorty) oil filter.

The LN Engineering Billet Spin-On High Performance Oil Filter uses a slightly increased porosity stainless mesh (60 versus the 30 micron of the stock paper filter). Along with increased surface area and larger pore size, our "shorty" Billet High Performance Washable Oil Filter will outperform the 1081 or it's larger sibling, the 1042, hands down. This increase in flow along with a smaller pressure loss across the element ensures the best possible protection for your engine from oil starvation. When coupled with our magnetic drain plug, a superior lubricant like Joe Gibbs XP9, and reduced drain intervals, our billet filter provides the best balance for cars that see both street and track use. With the introduction of our billet filter, for applications where ground clearance needs to be observed, we no longer recommend the Napa Gold 1081 and use of our billet filter is highly recommended for all vehicles used on the track instead of the Napa Gold 1042. The proper procedure for cleaning the filter involves dis-assembly of the filter and removal of the washable element. Wash out filter cup with mineral spirits or similar solvent. Do not get solvent of any type on the o-rings or seals, otherwise they will have to be replaced. Be sure to clean the filter element from the inside out to ensure media is clean. Oil o-rings and seals prior to re-assembly. Pre-fill the oil filter if so desired. Snug up the filter when re-installing and turn 1/2 to 3/4 of a turn tighter by hand as you would a conventional spin on oil filter.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-24

90021900930

10624

106-24

您正在查看的产品与这些编号存在交叉引用关系