Clamp 原装 Porsche 零部件 PCG11133600

Exhaust O-Ring and clamp kit for Tail pipe.
The OE Match Exhaust O-Ring & Clamp Kit is a complete hardware set designed to replace worn or deteriorated exhaust tail pipe O-rings and clamps on classic Porsche 964 models. These components help seal and secure the connection between the exhaust tail pipe and adjacent exhaust sections, ensuring a leak-free fit and proper exhaust alignment.
SET OF 2

Fits:
Porsche 964 C2 / C4 1989 - 1994

Diagram ref no 6 and 7

This OE Match exhaust hardware kit includes precisely sized O-rings, clamps, nuts, and bolts manufactured to meet OE-equivalent shape, dimensions, and material standards. Tail pipe O-rings provide a firm, resilient seal between slip-fit sections of the exhaust system, preventing exhaust gas leaks, vibration noise, and premature wear of mating surfaces. The clamps and fasteners are engineered to offer secure retention and long-term resistance to heat, vibration, and corrosion - common stressors in the exhaust environment.

Designed for classic air-cooled Porsche 911 models, this kit restores correct sealing and secure fitment of the tail pipe section - a crucial part of the exhaust path that influences sound, emissions, and engine performance.

Whether you’re performing routine exhaust maintenance, replacing worn hardware, or reinstalling components after service, this OE Match kit provides all the essential parts needed for a proper, direct-fit installation.

Over time, exhaust O-rings and clamps can become brittle, cracked, or corroded due to repeated heat cycles and exposure to the elements. Damaged seals or weak clamps can lead to exhaust leaks, increased noise, vibration, heat transfer to nearby components, and inefficient engine breathing. Replacing them with an OE Match kit restores proper sealing and secure mounting, helping maintain exhaust performance and engine efficiency.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EXHFITTING964.1

您正在查看的产品与这些编号存在交叉引用关系

排气系统用排气管O型圈和卡箍套装（6件）
这款原厂配套排气管O型圈和卡箍套件是一套完整的硬件组件，专为替换经典保时捷964车型上磨损或老化的排气尾管O型圈和卡箍而设计。这些部件有助于密封和固定排气尾管与相邻排气管段之间的连接，确保无泄漏安装和正确的排气管对齐。
一套6件

适用：
保时捷 964 C2 / C4 1989 - 1994

图示编号 6 和 7

这款原厂配套排气系统硬件套件包含尺寸精准的O型圈、卡箍、螺母和螺栓，其形状、尺寸和材料标准均符合原厂标准。尾管O型圈可在排气系统滑动配合部分之间形成牢固且富有弹性的密封，防止废气泄漏、振动噪音以及配合面过早磨损。卡箍和紧固件经过精心设计，可确保牢固固定，并能长期抵抗高温、振动和腐蚀——这些都是排气系统中常见的应力因素。

这款套件专为经典风冷保时捷 911 车型设计，可恢复尾管部分的正确密封和牢固安装——这是排气路径中至关重要的部分，会影响声音、排放和发动机性能。

无论您是进行日常排气系统维护、更换磨损的硬件，还是在维修后重新安装部件，这款 OE Match 套件都能提供正确、直接安装所需的所有基本部件。

随着时间的推移，排气管的O型圈和卡箍会因反复的热循环和风吹日晒而变脆、开裂或腐蚀。损坏的密封件或松动的卡箍会导致排气泄漏、噪音增大、振动加剧、热量传递至附近部件以及发动机呼吸效率降低。使用原厂配套的O型圈和卡箍套件进行更换，可以恢复其良好的密封性和牢固的安装，从而有助于保持排气性能和发动机效率。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EXHFITTING964.3

您正在查看的产品与这些编号存在交叉引用关系