后盖减震器

阻尼器 后发动机盖 发动机罩 标准
更换盖子减震器，防止盖子掉落。

#保时捷#

适合：（无大型扰流板）
保时捷 911
保时捷 964
保时捷 993

价格为每个价格。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233101

您正在查看的产品与这些编号存在交叉引用关系

91151233101 是一款高品质气压支柱，旨在支撑 1965 年至 1997 年保时捷 911 车型的后发动机盖。该减震器由 Stabilus 制造，该公司已为保时捷供货超过 40 年，可确保发动机盖平稳可靠地运行。

#稳定剂#

适合：（不带大型扰流板的汽车）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233101

您正在查看的产品与这些编号存在交叉引用关系

产品参考代码 911.512.331.01 是一款高品质气压减震器，用于支撑 1965 年至 1997 年保时捷 911 车型的后发动机盖。该减震器可确保发动机盖平稳可靠地运行。每个发动机盖安装两个（单价）。



适合：（不带大型扰流板的汽车）


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233101

您正在查看的产品与这些编号存在交叉引用关系

Damper rear engine lid bonnet.
Replacement lid damper, Stops the lid falling.



Fits: (WITH A LARGE SPOILER)
Porsche 911 cars with air conditioning
Porsche 964
Porsche 993

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233102

您正在查看的产品与这些编号存在交叉引用关系

Damper rear engine lid bonnet. Heavy Duty
Replacement lid damper, Stops the lid falling.



Fits: (WITH A LARGE SPOILER)
Porsche 911 cars with air conditioning
Porsche 964
Porsche 993

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233102

您正在查看的产品与这些编号存在交叉引用关系

阻尼器后部发动机盖罩。重型
更换盖子减震器，防止盖子掉落。



适合：（带大型扰流板）
配备空调的保时捷 911 汽车
保时捷 964
保时捷 993

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151233102

您正在查看的产品与这些编号存在交叉引用关系

Damper swivel pin clip.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1994-98

Click 'Zooom in' for large parts diagram.
Diagram ref no 13.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

N0126452

您正在查看的产品与这些编号存在交叉引用关系

阻尼器旋转销。

适合:
保时捷911（1965-73年）
保时捷911（1974-89年）
保时捷964 1989-94
保时捷993 1994-98

图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9991660430C

您正在查看的产品与这些编号存在交叉引用关系

阻尼器旋转销。

适合:
保时捷911（1965-76年）

图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90008701102

您正在查看的产品与这些编号存在交叉引用关系

阻尼器旋转销。
减震器旋转销（或固定销），用于在保时捷 911 的前引擎盖或发动机盖上安装气压支柱或减震器。它固定支柱/减震器的球头或旋转支架，使其能够控制运动，同时确保支柱在负载下保持固定。本产品为精确复制品。
单个出售。

适合:
保时捷 911 1965 - 1976

图表参考编号 11

该销钉穿过气压支柱或减震器的安装支架，并插入盖子或铰链组件上的安装点。弹簧卡簧或开口销将其固定到位，使支柱能够正确旋转，同时确保牢固固定。如果没有牢固的销钉，支柱可能会松动或脱落，从而影响盖子的安全性和功能。

随着时间的推移，销钉可能会因支柱反复运动、环境暴露（潮湿、路面喷溅）和老化而腐蚀、弯曲、磨损或丢失。销钉受损可能导致：
•气压支柱安装座松动或脱落
•盖子或阀盖无法保持打开状态或意外掉落
•由于不正确的枢转，导致支柱支架或铰链磨损加剧

更换条件：
•原有插销出现生锈、弯曲或固定夹缺失
•您正在更换或维修发动机罩或发动机盖上的气压支柱/减震器
•您正在修复车身或铰链/支柱组件，并需要正确、安全的硬件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90008701102

您正在查看的产品与这些编号存在交叉引用关系

引擎盖减震支柱用销夹。单个出售。



適用於:
保时捷 911/912 1965-73 前部和后部

单击“放大”可查看大部件图。
图表参考编号 5（正面）或 6（背面）。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90135195510

您正在查看的产品与这些编号存在交叉引用关系

引擎盖减震支柱用销夹。单个出售。



適用於:
保时捷 911/912 1965-73 前部和后部

单击“放大”可查看大部件图。
图表参考编号 5（正面）或 6（背面）。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90135195510

您正在查看的产品与这些编号存在交叉引用关系

Rear Decklid Strut Bracket.



Fits:
Porsche 911 1972-89

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91151203585

您正在查看的产品与这些编号存在交叉引用关系

Rennline Fully Mechanical Decklid Struct, Black for Porsche 911/912/930/964/993.
Sold per piece.



How many times have you replaced your hood and decklid struts? Us too… that's why we developed a line of fully mechanical hood and decklid struts. This is the last decklid strut that you will ever need. Factory decklid struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket decklids and tails. If you've ever installed a fiberglass tail, you've probably also noticed the pressure of the hydraulic shock likes to torque the decklid, usually creating an uneven body gap on the top left side.

Operation is simple. Just open your decklid all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood and decklid struts will not fail for the life of the product, and therefore carry a lifetime warranty. They utilize a billet design with complex machining to ensure a smooth and reliable operation. They're available with either a carbon fiber body or a black aluminum body to suit your style.

Check to see whether your car came with one or two decklid struts. For light decklids only one mechanical strut is required. Sold per piece.

Rennline Fully Mechanical Decklid Struct, Carbon Fibre for Porsche 911/912/930/964/993.
Sold per piece.



How many times have you replaced your hood and decklid struts? Us too… that's why we developed a line of fully mechanical hood and decklid struts. This is the last decklid strut that you will ever need. Factory decklid struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket decklids and tails. If you've ever installed a fiberglass tail, you've probably also noticed the pressure of the hydraulic shock likes to torque the decklid, usually creating an uneven body gap on the top left side.

Operation is simple. Just open your decklid all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood and decklid struts will not fail for the life of the product, and therefore carry a lifetime warranty. They utilize a billet design with complex machining to ensure a smooth and reliable operation. They're available with either a carbon fiber body or a black aluminum body to suit your style.

Check to see whether your car came with one or two decklid struts. For light decklids only one mechanical strut is required. Sold per piece.

Rennline Fully Mechanical Hood and Decklid Strut Package, Carbon Fibre for Porsche 911/912/930

This set comes as a package with 2 hood struts and 1 decklid strut.



How many times have you replaced your hood and decklid struts? Us too… that's why we developed a line of fully mechanical hood and decklid struts. This is the last set off struts that you will ever need. Factory hood/decklid struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket decklids and tails. If you've ever installed a fiberglass hood or tail, you've probably also noticed the pressure of the hydraulic shock likes to torque the body panel, often creating an uneven body gap on the top left side.

Operation is simple. Just open your decklid all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down.

Rennline's fully mechanical hood and decklid struts will not fail for the life of the product, and therefore carry a lifetime warranty. They utilize a billet design with complex machining to ensure a smooth and reliable operation. They're available with either a carbon fibre body or a black aluminum body to suit your style.