高性能点火导线

NOLOGY 点火 HT 引线高性能套装，适用于 6 缸发动机。

适合：
保时捷 964 Carrera C2/C4 3.6L 1990-94 年
双插头

电缆套件颜色有：红色、黑色、橙色、黄色、蓝色、紫色和银色，

NOLOGY 利用电容器原理开发高性能点火电缆组。这些点火电缆可产生强烈、短暂的点火火花。其潜在效果令人惊叹 - 尤其是对于压缩率极高或涡轮增压的发动机。

所有点火电缆组均已完全组装，并配有适合相应车辆的连接器。

为了确保电缆安装整齐，套件中始终包含电缆夹。


送货约 20 天。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1148901

您正在查看的产品与这些编号存在交叉引用关系

NOLOGY 点火 HT 引线高性能套装，适用于 6 缸发动机。

适合：
保时捷 911 Carerra 3.2L 1984-89（Motronic）
保时捷 964（965）涡轮增压 3.3L 1991-92

电缆套件颜色有：红色、黑色、橙色、黄色、蓝色、紫色和银色，

NOLOGY 利用电容器原理开发高性能点火电缆组。这些点火电缆可产生强烈、短暂的点火火花。其潜在效果令人惊叹 - 尤其是对于压缩率极高或涡轮增压的发动机。

所有点火电缆组均已完全组装，并配有适合相应车辆的连接器。

为了确保电缆安装整齐，套件中始终包含电缆夹。


送货约 20 天。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1148602

您正在查看的产品与这些编号存在交叉引用关系

NOLOGY 点火 HT 引线高性能套装，适用于 6 缸发动机。

适合：
保时捷 964（965）涡轮增压 3.6L 1993-94 年

电缆套件颜色有：红色、黑色、橙色、黄色、蓝色、紫色和银色，

NOLOGY 利用电容器原理开发高性能点火电缆组。这些点火电缆可产生强烈、短暂的点火火花。其潜在效果令人惊叹 - 尤其是对于压缩率极高或涡轮增压的发动机。

所有点火电缆组均已完全组装，并配有适合相应车辆的连接器。

为了确保电缆安装整齐，套件中始终包含电缆夹。


送货约 20 天。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1148603

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 964 turbo 3.3ltr - M30.69 engine code

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

67185

您正在查看的产品与这些编号存在交叉引用关系

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 964 turbo 3.6ltr - M64.50 engine code

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.

Magnecor Electrosports 7mm HT leads

Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6766

您正在查看的产品与这些编号存在交叉引用关系