后控制臂

Adjustable caster bushing kit.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Caster Tuning
Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms (GT3 control arms or eccentric monoballs) to correct for un-intended caster change that is caused by the extended arms.

Caster is also a great tuning aid for adjusting out understeer. Our Caster Adjusters let you tune the caster you need.

Two eccentric mounting points increase range of adjustment by up to 25mm. Choose from the inner bore for minor caster adjustments or the outer bore for extreme adjustments.

Rear Weight Bias
For the rear suspension, our Caster Adjuster can reduce rear overhang and rear weight bias. Cars with aggressive rear camber actually draw the wheels forward, increasing rear weight bias. Use our Caster Adjuster to compensate and even over-compensate for less rear weight bias than stock

Maintain Proper Alignment
Our Caster Adjuster is solid aluminum to hold alignment settings precisely. Stock rubber bushings compress under load, allowing alignment to wander and making the car less predictable. Our solid design eliminates compression, improves precision and maintains geometry true.

Functional Design Built To Last
Available for factory type lower control arms (wishbones) front and rear, including stock type arms and GT3 arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180011

您正在查看的产品与这些编号存在交叉引用关系

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180001

您正在查看的产品与这些编号存在交叉引用关系

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180009

您正在查看的产品与这些编号存在交叉引用关系

Litronic Bracket for adjustable control arms.



Fits
Porsche 987 - Rear with Litronic headlights
Porsche 981 - Rear with Litronic headlights

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

218002

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport front/rear lower control arm kit for Porsche 996/997/991/987/981 except GT4
Fits cars with and without PASM



Features :

•   Improved two piece 996 GT3 lower control arm design
•   Stronger than cast motorsport Cup arms
•   Allows proper camber adjustment
•   Uses GT3 shims to adjust camber & lower control arm length (sold separately)
•   High-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
•   Sealed monoball inner bearing
•   Allows easy access to inner arm hardware
•   Includes adjustable thrust arm bushings to adjust caster and wheelbase
•   A must have for all track and race enthusiast
•   Each kit includes pair of 2 arms
•   Fits both front and rear axles
•   Compatible with all 996/997/991/987/981 models except GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBILOWRCNTRL9697

您正在查看的产品与这些编号存在交叉引用关系

后直立轮架衬套工具。
每个应用需要 1 个工具

#大象赛跑#

适合
保时捷 991 - 后部
保时捷 991 Turbo - 后部

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器安装衬套的工具。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

226001

您正在查看的产品与这些编号存在交叉引用关系

ADJUSTABLE THRUST ARM BUSHING KIT (For vehicles equipped with Hydraulic Thrust Arm Bushings Only).
SET OF 4. FRONT AXLE ONLY



The RSS Adjustable Thrust Arm Bushing Kit will improve handling and response in 987. 997, 981, GT4, 991 GT3 variants, suspension systems and allows for additional caster adjustments. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.

AVAILABLE FOR ALL PORSCHE® 987,981, GT4, 997, 991 and 991 GT3, and 991 TURBO
NOT FOR 997 GT3/GT2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

360

您正在查看的产品与这些编号存在交叉引用关系

RSS XL TARMAC 系列 XL 2 件式完整下控制臂套件 - 后轴（2 对）。



RSS Tarmac 系列赛车下控制臂专为降低车身并配备减震器（如 PASM 或 M030 选件）的车辆而设计。或者，如果汽车配备高品质售后市场或赛车绞牙套件（例如 Bilstein PSS10、KW V3 或 Ohlins 等）。

下控制臂与“基本型悬架”（长行程支柱/减震器）或“带降低弹簧的基本型支柱/减震器”不兼容。
注意：请勿安装在带有基本型号支柱/减震器的车辆上，因为当支柱/减震器完全伸展或完全下降时，可能会导致悬架卡住，从而导致不安全的驾驶条件。

适合：
适用于保时捷 986, 996, 997, 987, 981/982/718 后轴

包括：
- 可调/非液压更换推力臂衬套，
- 1mm/2mm/3mm/7mm 垫片，
- 球形单球端。
*** 注意： 981 和 991 型号可能需要额外的前 Litronic 或扭矩矢量传感器支架。

RSS Tarmac 系列赛车下控制臂专为降低车身并配备减震器/减震器的车辆而设计。如果您需要帮助确定您的悬架类型，请联系我们。有关具体安装信息，请参阅“底盘安装指南和下控制臂安装说明”（见下图）。

RSS Tarmac 系列 - 赛车控制臂专为保时捷驾驶员设计，他们对底盘的精确操控、反馈和控制有绝对最高的要求。该系统经过特别设计，提供无与伦比的性能、质量、强度和可维护性。RSS Tarmac 系列控制臂解决了 OEM 橡胶安装悬架组件的性能缺陷，这些组件旨在降低日常街道使用的道路噪音和振动。在控制臂、推力臂、上连杆和趾臂等安装组件中使用橡胶注塑件会对最大悬架性能造成损害。软橡胶会在悬架负载下发生偏转，进而导致悬架和底盘之间出现不必要的运动（偏转）。数据还显示，弹簧刚度也可能出现暂时变化。这些运动和变化会导致驾驶员进行不必要的修正和输入。

特点与优势：
• 可更换子组件：对于极端、重复的赛道爱好者或赛车手来说，我们的高强度
钢合金球面轴承（带有减少摩擦、增加使用寿命的特氟隆衬里）外臂和内臂子组件可更换
与赛车臂不同，赛车臂需要购买一套新的臂，如果
球面轴承磨损。
• 可调悬架几何结构：使用我们的
独特的镀锌钢衬套。
• 实心单球控制臂端：提供更好的操控性和更灵敏的悬架
工厂一体式橡胶注射控制臂，消除衬套偏转（也使用相同的
在我们的控制臂单球套件中发现高强度钢合金球面轴承）。
• 6061 航空级铝坯结构：可实现更均匀的分子结构
在手臂的每一点上，铸造的部件提供了更耐用和固有的
更坚固的部件。用铝坯制造而不是铸造可以减少杂质
金属。
• 阳极氧化铝表面和镀锌钢部件：具有更好的耐腐蚀性
抵御自然元素。

适用于大多数保时捷 996、986、981、982、987 和 997 车型，包括 TURBO、GT2、GT2RS、GT3 和 GT3RS。

RSS TARMAC 系列赛车运动悬挂套件已在世界各地各种形式的赛车运动（从公路赛车到拉力赛）中赢得冠军和比赛。RSS 是世界各地专业赛车队、改装车手、赛道爱好者和驾驶爱好者的首选悬挂。
- 2015 年倍耐力世界挑战赛 TC 冠军
- 2014 年国际汽联西班牙拉力赛柏油路面锦标赛
- 2013 年劳力士 GRAND-AM GX 冠军赛

RSS 高性能 Tarmac 系列悬架组件均在美国设计、制造。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

374

您正在查看的产品与这些编号存在交叉引用关系

REAR NON-ADJUSTABLE THRUST ARM BUSHING KIT. Rear Axle. Ideal for castor/length adjustable style thrust arms from other brands. for Porsche 986/996/997/981/982/718

SET OF 4. REAR AXLE ONLY

Brand:

The RSS Non-Adjustable Thrust Arm Bushing Kit will improve handling and response in suspension systems. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.

AVAILABLE FOR ALL PORSCHE® 986, 987, 996, 997, 981 MODELS INCLUDING TURBO & GT3 FOR NON-HYDRAULIC APPLICATIONS ONLY FOR HYDRAULIC APPLICATIONS.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

334

您正在查看的产品与这些编号存在交叉引用关系

后趾连杆锁定板套件。
两件套

适合:
保时捷 996 C2、C4、C4S、涡轮增压、GT2、GT3
保时捷 997 C2、C2S、C4、C4S、Turbo、GT2、GT3
保时捷 986 Boxster / Boxster S
保时捷 987 Boxster / Boxster S
保时捷 987 Cayman / Cayman S
保时捷 981 Boxster / Boxster S
保时捷 981 Cayman / Cayman S / Cayman GT4
保时捷 991 C2、C2S、C4、C4S、Turbo、GT2、GT3
保时捷 982 (718) Boxster / Boxster S
保时捷 982（718）Cayman / Cayman S

可选的 RSS 锁定板套件设计用于 RSS 可调后束/碰撞转向套件（零件编号 312） 。

该套件取代了工厂偏心螺栓，该螺栓在赛车和/或激烈驾驶条件下可能会松动。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

333

您正在查看的产品与这些编号存在交叉引用关系