后控制臂

Adjustable caster arms with anti-dive and anti-squat.



Fits
Porsche 986 Boxster - Front Only
Porsche 987 Boxster and Cayman - Front Only
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear

Set of 2 x Adjustable caster arms - 1 pair, required per axle

Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front, and adjustable wheel base, weight distribution, and anti-squat when used on the rear.

Front Suspension

Threaded double-adjuster makes it easy to extend or shorten the arm.

This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.

Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.

Rear Suspension

Adjustable Caster Arms can reduce rear overhang and rear weight bias. A must-have for cars with GT3 style extendable style lower control arms. Adjust the length of the caster arms to correct the position of the rear wheels that have been drawn forward by aggressive camber settings. Even over-compensate for less rear weight bias than stock.

With the heavy mass of the engine cantilevered behind the rear axle, even small changes in wheel base make significant changes in weight distribution. Shortening the overhang reduces the famous 911 "pendulum" effect in corners.

Anti-squat behavior can also be adjusted. Raising the front of the caster arm using the provided spacers reduces rear squat under acceleration. Adjustable in 2mm increments.

Fully weather sealed> – Proper boots at the heim joint keep water and contaminant out for extended life.

If not using Adjustable Lower Control Arms

1999-2012 996, Boxster, Cayman, & GT3 Front: Bolt on if replacing the lower control arm central bushing with 2290022 / 2290014 rubber bushings, or our 2180011 camber adjusters.

1999-2012 996, 997 & GT3 Rear: Straight bolt on.

2006-2018 997, Boxster, Cayman, & 991 Front: Requires fitment of our part number 2290022 or 2290014 LCA central bushings or 2180011 solid caster bushing kit

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180005

您正在查看的产品与这些编号存在交叉引用关系

Adjustable caster bushing kit.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Caster Tuning
Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms (GT3 control arms or eccentric monoballs) to correct for un-intended caster change that is caused by the extended arms.

Caster is also a great tuning aid for adjusting out understeer. Our Caster Adjusters let you tune the caster you need.

Two eccentric mounting points increase range of adjustment by up to 25mm. Choose from the inner bore for minor caster adjustments or the outer bore for extreme adjustments.

Rear Weight Bias
For the rear suspension, our Caster Adjuster can reduce rear overhang and rear weight bias. Cars with aggressive rear camber actually draw the wheels forward, increasing rear weight bias. Use our Caster Adjuster to compensate and even over-compensate for less rear weight bias than stock

Maintain Proper Alignment
Our Caster Adjuster is solid aluminum to hold alignment settings precisely. Stock rubber bushings compress under load, allowing alignment to wander and making the car less predictable. Our solid design eliminates compression, improves precision and maintains geometry true.

Functional Design Built To Last
Available for factory type lower control arms (wishbones) front and rear, including stock type arms and GT3 arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180011

您正在查看的产品与这些编号存在交叉引用关系

可调控制臂，适用于 OE 99634104306、99733104301，
赛车产品

适合:
保时捷 996 1998-04 前部和后部
保时捷 997 2005>> 前部和后部
保时捷 986 Boxster 1997-05 仅限前部
保时捷 987 Boxster 2005>> 仅前部
保时捷 987 Cayman 2005>> 仅前部

特征：

这些是工厂推力臂的直接替代品，并且将改善操控性并增加精密脚轮的可调性。

包括用于设置库存或防蹲和防俯冲配置的垫片。

精密的特氟隆内衬球形杆端取代了原厂橡胶衬套，从而提升了悬架的响应和反馈，最终提高了稳定性和控制力。

调节连杆两端各有左旋和右旋螺纹。旋转连杆即可精确增加或减少臂的总长度。

每辆车需要两个用于 986/987/996/997/981/991 前悬架的连杆，以及两个用于 996/997/986/987/981 后悬架的连杆。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996010

您正在查看的产品与这些编号存在交叉引用关系

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180001

您正在查看的产品与这些编号存在交叉引用关系

可调节后趾臂。
每辆车需2个。单独出售。



降低 996/997/986/987 后束角时，您不可避免地会遇到后束角调整问题。由于这些车辆对后束角调整极其敏感，这个问题更加严重；仅仅一两度的偏差就可能意味着一辆平顺的日常驾驶车辆和一辆颠簸的赛车之间的区别。如果您需要调整这些设置，但又不想选择像我们的 S70.10.41 后束控制臂（带减震转向套件）这样的全实心球形套件，那么这款套件就是您的完美选择。

此套件包含您所需的一切，可为您的爱车提供后束调节所需的一切。它包含一根原厂后外拉杆和一个FK特氟龙内衬轴承，并配有可调千斤顶螺母，让您能够精确地将后束调整至规格要求。使用原厂外拉杆，此设置可在NVH和合规性方面保留更接近原厂的感觉，同时避免轮胎烧穿和操控性不佳的情况。


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S62

您正在查看的产品与这些编号存在交叉引用关系

同心单球套件后上控制臂。
包含 8 个单球

每辆车需 1 套



适合
保时捷 996 - 1997 年至 2005 年
保时捷 997.1 - 2005 年至 2008 年
保时捷 997.2 - 2009 年至 2012 年

后 996 和 997 上控制臂的完整套件。包括用于后上控制臂衬套的防风雨单球筒替换件。包括 8 个筒。

性能– 粘性轮胎会产生角载荷，从而压缩橡胶衬套。外倾角和前束会偏移，需要驾驶员不断进行校正以进行补偿。单球轴承用球形轴承代替橡胶，可以保持精确的外倾角和前束，使汽车更可预测且更容易快速行驶。

防风雨密封件- 我们专有设计的 Monoball 弹筒具有防风雨密封件，可防止灰尘进入并延长产品寿命。灰尘和水会污染普通产品并加速磨损。

单击“放大”可查看大部件图。
图表参考编号 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260010

您正在查看的产品与这些编号存在交叉引用关系

Eccentric adjuster locking kit.
4pcs in kit - 1 kit required per car



Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180017

您正在查看的产品与这些编号存在交叉引用关系

偏心锁套件。适用于保时捷 993 / 986 / 987 / 996 / 997 车型。



适用：
保时捷 986 Boxster
保时捷 987 Boxster / Cayman
保时捷993
保时捷996
保时捷997

产品描述
Rennline的偏心锁紧套件可替换原厂的偏心调节系统，后者常会导致赛道使用过程中出现定位偏差。这些锁紧装置能够牢固地固定可调连杆的副车架侧，确保车辆在重载情况下定位不会发生变化。

本产品成对出售，包括 2 个螺栓、2 个锁紧螺母、4 个垫圈和 4 个偏心锁紧螺母。

993 - 可用于上控制臂和下脚趾臂。
996/997/986/987 - 可用于下控制臂和下脚趾臂。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S40

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport 前后可调推力臂衬套套件，适用于保时捷 996 / 997



特征 ：

• 提供两个偏心安装点
• 用于调整增加或减少轴距，以及可调节的后轮距。
• 加长型下控制臂（GT3 控制臂或偏心单球头）的必备配件，用于校正意外的主销后倾角变化
• 兼容所有保时捷 996 和 997 原厂下控制臂（包括保时捷原厂下控制臂）
赛车杯手臂）
• 一套共4个（2个前轮和2个后轮）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBITHRUSTBUSH9697

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport 前后可调推力臂套件，适用于保时捷 996 / 997 / 986 / 987



合身
996 和 997前部和后部
986 和 987仅前部

特征 ：

• 将下控制臂连接到副车架
• 提供精确的脚轮调节功能
• 包含用于设置标准配置或防下沉和防俯冲配置的垫片
• 每套包含 2 个连接环
• 适用于前轴和后轴

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBITHRUST9697

您正在查看的产品与这些编号存在交叉引用关系

GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.



Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)

Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.

These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180039

您正在查看的产品与这些编号存在交叉引用关系

Rennline GT3 下控制臂 Litronics 支架。



适用：
保时捷 996 / 997 / 986 / 987 / 981 / 991

这款 Litronics 垫片套件包含您所需的一切，可将原厂 Litronics 系统与升级后的 GT3 控制臂配合使用。每套套件适用于前部或后部。
如果要在车辆的前后轴都安装 GT3 控制臂，则某些车辆需要前后轴套件。

Litronic Bracket for adjustable control arms.



Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights

Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,

Price is for 1 and 2 Required per axle

This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180009

您正在查看的产品与这些编号存在交叉引用关系