后履带控制臂

Rear upper centre track control arm set, Ref No. 97033104700. 
This Set of 2 includes two 97033104700 control arms — enough for both sides of the rear axle for the Porsche Panamera (970 series). Each arm is manufactured to the same exacting standards, so that left and right sides operate in harmony with equal performance characteristics. This paired set is perfect for a full rear-axle refresh, ensuring matched components and consistent handling.
SET OF 2,  for both sides (left and right).

Fits:
Porsche 970.1 Panamera 2010 - 2013 all models
Porsche 970.2 Panamera 2014 - 2016 all models

Diagram ref no 9

• Position on Vehicle: Rear suspension, both upper outer or upper inner arms (as appropriate) for full-axle replacement.
• Applications: Ideal when replacing suspension components on both sides to maintain symmetry, avoid mismatched parts, ensure uniform ride and handling behaviour across the rear axle.

Replacing only one side can lead to mismatched suspension behaviour where one arm is new and the other is old, resulting in uneven wear, asymmetric handling or poor alignment outcomes. A full-set ensures both sides work identically, delivering harmonised performance and maximising the service life of the rear suspension system.

When to replace both:
• Both arms show wear or have original bushings and you want uniform performance.
• Undergoing major rear suspension service where access is granted to both sides.
• Addressing rear-end instability, asymmetric tyre wear or suspension misalignment.
• High-mileage vehicle where the rear suspension components across both sides are approaching end-of-life together.
• Preventative replacement to avoid repeated labour and downtime.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97033104700

您正在查看的产品与这些编号存在交叉引用关系

Complete Rear Upper Control Arm set, includes:
• 2x 97033104700 (upper control arms)
• 4x 97033104300 (upper outer track control arms)
• A genuine OE Porsche fitting kit (bolts, washers, nuts, alignment shims as required)

Together, these components offer a complete rear upper suspension refresh. Each control arm is manufactured to match original Porsche equipment in terms of geometry, material, bushings and mounting points - ensuring restored capability for alignment, ride comfort and handling precision.

Fits:
Porsche 970 Panamera 2010 - 2016

Diagram ref no 8, 9, 15, 18, 19, 20.

• Position on Vehicle: Rear suspension, upper level - two centre arms and four outer track arms, connecting the sub-frame to wheel hubs/carrier assemblies.

• Applications: Ideal when the original suspension arms or bushings show wear, excessive play or mis-alignment; or when you are performing a full rear axle suspension overhaul to bring handling back to factory standard.

The rear upper control arms and outer track links play a vital role in locating the wheels, maintaining alignment, and ensuring stable vehicle dynamics. If these components wear or the bushings fatigue, you’ll likely see rear-end instability, uneven tyre wear, clunks under load or degraded handling. Replacing them restores correct rear geometry, improves ride and handling consistency and helps protect other suspension parts.

When and why to replace:
• Rear suspension creaking, knocking or excessive play when cornering or accelerating.
• Rear tyres showing uneven wear or alignment falling out of spec.
• During major rear suspension service (bushings, link arms, subframe removal) - when access allows a full kit change.
• High-mileage Panamera where original suspension arms may have reached the end of their service life.
• For full-axle symmetry: when one side is worn, replacing both sides with matched parts eliminates mismatch in performance and handling.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97033104X00

您正在查看的产品与这些编号存在交叉引用关系

后上外侧控制臂组件。
这套组件（4 × 97033104300）可全面替换保时捷Panamera（970系列）后桥左右两侧的后上外侧控制臂，是进行后悬架全面翻新时的理想之选。每个控制臂均按照原厂规格制造。
一套4件，左右两侧均适用。

适用：
保时捷 970 Panamera 2011 - 2016

图示编号 8

•车辆位置：后悬架，左右两侧上外侧横拉臂。
•交叉参考/替代编号：4 × OEM 参考编号 970 331 043 00。
•应用：建议在处理两侧磨损、两端均可触及时，或进行主动悬架维护以保持最佳操控对称性时使用。

仅更换一侧的部件会导致悬架响应不均匀、衬套动态特性不匹配或定位偏移。全套更换可确保两侧使用相同的全新部件，从而保持对称性、轮胎磨损和操控平衡。

何时需要更换全部四个部件：
•两个后外侧履带臂均有磨损或为原装部件。
•在进行重大后悬架维修（衬套、减震器、连杆）后，当施工条件允许时进行。
•当您发现车辆后部不稳定、轮胎磨损不均或操控不一致时。
•行驶里程较高的 Panamera，其原装后悬架部件已接近使用寿命终点。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97033104300

您正在查看的产品与这些编号存在交叉引用关系