前扰流板/保险杠

SportDesign package. Includes new front apron with new front spoiler and new extendible rear spoiler in a unique design. Please note: Significantly reduced approach/departure angle



Fits:
Porsche 991.2 C2 / C2S 2017>>
Porsche 991.2 C4 / C4S 2017>>
Porsche 991.2 Targa / Targa S 2017>>
Porsche 991.2 Carrera T 2017>>

Options:
- For vehicles without headlight cleaning system and without front or rear ParkAssist
- For vehicles with headlight cleaning system and without front or rear ParkAssist
- For vehicles without headlight cleaning system and with front and rear ParkAssist
- For vehicles with headlight cleaning system and with front and rear ParkAssist

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9910448037

您正在查看的产品与这些编号存在交叉引用关系

Original Porsche Aerokit 911 Turbo add-on package



For vehicles with painted side skirts and/or painted rear apron. Add-on kit includes new front spoiler with side fins, new fixed rear spoiler with new automatically extending rear wing, can be painted in exterior colour.

Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99104480308

您正在查看的产品与这些编号存在交叉引用关系

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.2 GT3 / GT3 RS - 2016 to 2018

The Dive Planes for the Porsche 991.2 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

前保险杠通风格栅。
具有 TÜV 零件证书（§19.3）。

#莫沙默#

适合：
保时捷 991.1 Carrera / Turbo
保时捷 991.2 Carrera / Turbo

991 前保险杠通风格栅确保了最佳的空气动力学性能，同时也是一个漂亮的 OEM+ 设计元素，让您的保时捷拥有独特的外观。

对于冷却和空气动力学而言都很重要的一个部件。确保快速排出热空气。优化机组冷却。

这款前保险杠通风格栅已涂上底漆和油漆。包含安装材料。

请注意，此商品不是库存产品。这是特殊订单部件，一旦向我们订购，除非证明不适合用途或有缺陷，否则不得取消或退货。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P991.20.1010

您正在查看的产品与这些编号存在交叉引用关系

前保险杠鸭翼采用碳纤维制成。
成对出售



適用於:
保时捷 991.2 GT3 2018-21


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.2GT3CARBFRTCAN

您正在查看的产品与这些编号存在交叉引用关系

前保险杠鸭翼采用高光泽碳纤维制成。

#沃施泰纳#

适合：

保时捷 991.1 911 GT3
保时捷 991.1 911 GT3RS
保时捷 991.1 911 R
保时捷 991.2 911 GT2RS

这些前保险杠鸭翼（俯冲机）旨在增加前端的下压力，采用预浸高压釜碳纤维制成，表面具有高光泽度。

可以使用双面胶带进行安装，以防止在工厂前保险杠上钻孔。

Front bumper lower splitter kit. 



Fits:

Porsche 991.2 GT3 RS

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.

Kit Includes

• Carbon Polyweave Splitter 
• Polyweave Grind Strake x 4
• Carbon Splitter Diffuser x 2
• Sheet Aluminum Diffuser Block Off x 2
• Sheet Metal Bracket Kit x 13
• Steel Cross Beam Tube 
• Clevis x 4
• Splitter Support Rod Assy x 2
• Hardware Kit, Including all Hardware Necessary for a Seamless Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout

前保险杠下扰流板采用高光泽碳纤维。

#沃施泰纳#

适合：

保时捷 991.2 911 GT2 RS

前保险杠下扰流板旨在增加前端的下压力，从而提高稳定性和操控性。

由预浸高压釜碳纤维结构制成，具有高光泽的表面。

碳纤维前保险杠下扰流板。
采用碳纤维预浸料高压釜高温成型，斜纹 2×2，200 克织物制成。表面为透明光泽。

#斯福扎#

适合：
保时捷 991.1 Turbo
保时捷 991.2 Turbo
请注意： SF/C/991-505-525-02-G2X/TURBOMK1

安装作为 OEM 前扰流板的替代品，并不替代下部充气扰流板。


请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC99150552502G2X

您正在查看的产品与这些编号存在交叉引用关系

Front bumper lower spoiler.
This comes Primed and will need to be painted.



Fits:
Porsche 991.2 GTS
Porsche 991.2 Cars with Sport Design package
Optional equipment codes: IXAS / IXAS

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150598305G2X

您正在查看的产品与这些编号存在交叉引用关系