Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
DesignTek
About DesignTek
DesignTek for Porsche
DesignTek parts for Porsche models from Design911.
A Quick Look at DesignTek
DesignTek information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where DesignTek is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose these parts include fixing common wear points, returning a Porsche to standard performance, and managing running costs on older cars.
- Common triggers for replacement are leaks, knocks, worn mounts, poor ride quality, and intermittent operation of affected components.
- Watch for real-world symptoms such as hesitation, flat spots, noisy or restricted intake, warning lights, rough running, and reduced fuel economy.
- Before upgrading or tuning, ensure underlying mechanical issues are resolved rather than masked by new parts.
- When servicing or modifying, inspect adjacent components at the same time to avoid repeat labour or missed wear items.
- Check what fittings, seals, and hardware are included with each part and add any required extras so the job can be completed in one go.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Tuning — Engine tuning components for Porsche are typically used to improve drivability, throttle response, and power delivery, or to support other hardware changes where listed.
- Confirm the engine’s health and check for boost or vacuum leaks before any tuning work.
- Review sensor data, oil and coolant temperatures, and fuel delivery to ensure the car is mechanically sound.
Air Filters — Air filters for Porsche applications help maintain correct airflow while protecting the engine from dust and debris, with changes usually driven by routine service or performance goals.
- Replace filters more frequently if the car is used in dusty or harsh environments.
- Avoid over-oiling reusable filters to reduce the risk of sensor contamination where fitted.
Air Induction Kits — Air induction kits for Porsche are selected to alter airflow and sound and, where design allows, to reduce restriction or manage intake temperatures as part of a wider tuning package.
- Ensure the kit maintains proper sealing and sensible intake air temperatures to protect drivability.
- Check mounting security and routing after installation to minimise rattles, hot-air ingestion, or water exposure.
Service Parts — Service parts for Porsche are changed as part of scheduled maintenance to protect the engine and supporting systems, helping preserve performance, reliability, and efficiency.
- Use correct-specification oils, filters, plugs, and fluids and keep a clear record of what has been replaced.
- Shorten service intervals if the car sees frequent short journeys or hard use.
Air Filters — Replacement and performance air filters for Porsche applications are used to maintain clean, consistent airflow and can also support specific performance or motorsport needs where appropriate.
- Inspect the airbox or housing when changing the filter and ensure the seal seats evenly all the way around.
- If a performance filter is used, follow the maker’s cleaning and re-oiling instructions carefully.
Explore DesignTek at Design911
View the current DesignTek range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
36040018CCF
Product Information
Brake Disc Ø: 410mm
Brake Disc Thickness: 36mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040018CCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 918 4.6 Plug-In Hybrid.Brake Disc Ø: 410mm
Brake Disc Thickness: 36mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 918 Spyder 4.6L
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics.
Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040018CCF
91835140701
91835140801
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 918 Spyder 4.6L
Price: £3,263.22
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040091GT3CR
Product Information
Brake Disc Ø: 390mm
Brake Disc Thickness: 32mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.1 R 4.0L (500 Bhp) 2016
Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040091GT3CR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 991 GT3.Brake Disc Ø: 390mm
Brake Disc Thickness: 32mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.1 R 4.0L (500 Bhp) 2016
Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040091GT3CR
9GT615601D
9GT615602D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Price: £4,156.14
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
360400GT4CF
Product Information
Brake Disc Ø: 380mm
Brake Disc Thickness: 34mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360400GT4CF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 982 GT4 / 991 T / 981 GT4.Brake Disc Ø: 380mm
Brake Disc Thickness: 34mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Porsche Cayman GT4 3.8L 2015-16
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics.
Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360400GT4CF
992615301AD
9P1615302H
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Price: £3,928.85
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040092CCR
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 992.1 Carrera 2 3.0L 2019-24
Porsche 992.1 Carrera 4 3.0L 2019-24
Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Targa 4 3.0L 2020-24
Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092CCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 992 Carrera.Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 992.1 Carrera 2 3.0L 2019-24
Porsche 992.1 Carrera 4 3.0L 2019-24
Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Targa 4 3.0L 2020-24
Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092CCR
9P1615601
9P1615602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Price: £3,149.57
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040092SCF
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 34mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 992.1 Carrera 2S 3.0L 2019-24
Porsche 992.1 Carrera 4S 2019-24
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092SCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 992 Carrera S / 4S.Brake Disc Ø: 350mm
Brake Disc Thickness: 34mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 992.1 Carrera 2S 3.0L 2019-24
Porsche 992.1 Carrera 4S 2019-24
Porsche 992.1 Carrera 2S Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S Cabriolet 3.0L 2019-24
Porsche 992.1 Targa 4S 3.0L 2020-24
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics.
Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092SCF
992615302
992615301
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Price: £2,695.00
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040082GCR
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 28 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040082GCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 982 Boxster / Cayman GTS.Brake Disc Ø: 350mm
Brake Disc Thickness: 28 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040082GCR
98135240300
98135240400
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: £3,071.65
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040082GCF
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040082GCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 982 Boxster / Cayman GTS.Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040082GCF
9P1615301J
9P1615302J
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: £2,662.53
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040092TCR
Product Information
Brake Disc Ø: 390mm
Brake Disc Thickness: 32mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Turbo 3.8L 2020-24
Porsche 992.1 Turbo S 3.8L 2020-24
Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
Porsche Cayman GT4 3.8L 2015-16
Porsche Cayman GT4 718 4.0L
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092TCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 992 Turbo.Brake Disc Ø: 390mm
Brake Disc Thickness: 32mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Turbo 3.8L 2020-24
Porsche 992.1 Turbo S 3.8L 2020-24
Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
Porsche Cayman GT4 3.8L 2015-16
Porsche Cayman GT4 718 4.0L
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092TCR
992615601Q
992615602Q
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Price: £3,071.65
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040087SCR
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 987 MKII 3.4L Spyder / RS 2009-2012
Porsche Cayman R 3.4L 987C MKII 2009-12
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040087SCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 987 Boxster Spyder / Cayman R.Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 987 MKII 3.4L Spyder / RS 2009-2012
Porsche Cayman R 3.4L 987C MKII 2009-12
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040087SCR
98735240301
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: £3,071.65
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040087SCF
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 987 MKII 3.4L Spyder / RS 2009-2012
Porsche Cayman R 3.4L 987C MKII 2009-12
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040087SCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 987 Boxster Spyder / Cayman R.Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 987 MKII 3.4L Spyder / RS 2009-2012
Porsche Cayman R 3.4L 987C MKII 2009-12
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040087SCF
99635140501
99635140601
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: £3,159.32
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040097TCR
Product Information
Brake Disc Ø: 380mm
Brake Disc Thickness: 30mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097TCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 997 Turbo.Brake Disc Ø: 380mm
Brake Disc Thickness: 30mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097TCR
99735240502
99735240602
99135203101
99135203201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Price: £3,441.80
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040097TCF
Product Information
Brake Disc Ø: 380mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097TCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 997 Turbo.Brake Disc Ø: 380mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MK1 GT2 2007-09
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097TCF
99735140501
99735140601
99735103197
99735103297
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Price: £3,863.91
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040081CCF
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 981 2.7L 2012-16
Porsche Boxster 981 S / GTS 3.4L 2012-16
Porsche Cayman 2.7L 981 2013-16
Porsche Cayman S / GTS 3.4L 981 2013-16
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040081CCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 981 Boxster / Cayman.Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche Boxster 981 2.7L 2012-16
Porsche Boxster 981 S / GTS 3.4L 2012-16
Porsche Cayman 2.7L 981 2013-16
Porsche Cayman S / GTS 3.4L 981 2013-16
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040081CCF
982615301B
98135103201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Price: £2,419.00
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040097CCR
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097CCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 997.Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097CCR
99635240502
99635240602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
Price: £3,246.99
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040097CCF
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097CCF
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Front Brake Discs For Porsche 997.Brake Disc Ø: 350mm
Brake Disc Thickness: 34 mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 997 MK1 Carrera 2S 3.8L 2005-08
Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Porsche 997 MK1 TURBO 2007-09
Porsche 997 MK1 GT3 2007-09
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII GT3 2010-11
Porsche 997 MKII Turbo 2010-13
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040097CCF
99635140904
99635141004
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
Price: £3,100.87
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
36040096CCR
Product Information
Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040096CCR
The product you are viewing cross references to these numbers
Product Information
DesignTek Carbon Ceramic Rear Brake Discs For Porsche 996.Brake Disc Ø: 350mm
Brake Disc Thickness: 28mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 996 C4S 3.6L 09/01-2005
Porsche 996 TURBO 2000-05
Porsche 996 GT2 2001-05
Porsche 996 GT3 MKI 1999-02
Porsche 996 GT3 MKII 2003>>
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040096CCR
99635240104
99635240502
99135203101
99635240602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
Price: £3,149.57
Orderable - 28 to 42 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Free delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information